ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.

Piled friction soil show a set-up which is increasing with the time after installation. The cost could be reduced if the set-up had been taken into account when designing but in Sweden it is very unusual to do that. Previous studies showed that set-up can vary between 25 % and 75 % during the first 90 days after pile installation. This showed that the effect of the phenomenon is difficult to predict. A study involving five projects have been carried out by specifying certain parameters like pile type, method for pile installation and test method for measure the bearing capacity in friction soils located in Sweden.

Picker robots are often mounted close to each other above a conveyor belt. To be able topack robots even closer, it is desirable to reduce the footprint of the robot?s base. One way toachieve this is to skew the arms of the robot which makes it possible to move them closer toeach other.This Master Thesis has been carried out at ABB Corporate Research. The purpose is toevaluate the benefits and drawbacks for the idea of making today?s Picker robot morecompact by skewing the arms.

This thesis highlights starting points underlying the notions of two feminist utopians, Christine de Pizan and Charlotte Perkins Gilman. In approaching their texts, it focuses on the notions central to understand their writings. These would be historical, social, and cultural contexts. Defining concepts as utopian in its varying forms and feminism has been of significance. A feministic approach grounded in Simone de Beauvoirs philosophical phenomenology in the study of feministic utopia's visibility, has contributed to the understanding of the power structures to which women are tethered. In order to understand the way women are presented, it has become obvious that The Book of the City of Ladies and Herland are literary works that are related not only by their authors? background and personality but by the society in which they lived. Through their engagement in the contemporary intellectual debate on all social planes, both authors contributed to shifting the focus of their own contemporary notions of a woman to the notion of a woman equal to men. Woman, in Christine de Pizans utopia, is given specific properties and through themes of issues given meaning. She is not free in the sense that Simone de Beauvoir says.  She has a broader repertoire than was historically assigned, but her freedom is not arbitrary, contingent, and temporary and judged by her actions.

The project this report is handling has been implemented on NBB, Nordisk Bilbelysning AB in Linköping. The company produces and develops lightning and searchlights for all types of vehicles. Lately NBB´s supplier of electronics, OSRAM, has developed a mercuryfree xenon lightsource. Mercury is one of the most hazardous environmental waste and to get rid of the mercury entirely in the lightsource is a big step that means alot for the environment.This lightsource will be placed in one of NBB´s worksearchlights called My, and will be sold as an alternative to mercurycontaining searchlights. NBB wants to put an environmental label on this product and they want to have essential information about the product that is needed for the production.

Abstract Background: In 1997 the Kyoto Protocol was signed, it?s an international agreement which is aimed to reduce greenhouse gas emissions. Sweden's goal is to reduce energy using in buildings with 20 percent by 2020 and 50 percent by 2050. This is a comparison with levels from 1995 (Glad, 2006). For Sweden to be able to reach its goals, they need to construct more low-energy buildings (Åhman, Wahlström & Lundblad, 2010).

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

In conventional viscose manufacturing, a large amount of carbondisulfide is consumed. This amount has to be decreased to keep the production cost down and to reduce the environmental impact. The purpose with this work was to show if an enzyme treatment of a dissolving pulp could increase the degree of substitution in the viscose so that the amount of carbon disulfide consumed in the process could be decreased. Previous investigations by Kvarnlöf (2007), Engström et.al. (2006) and Henriksson et.al.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

An ever-increasing population, urbanization and visions towards sustainable cities clarifies the need of densification. When densifying existing urban areas adding storeys could serve as a residential densification, which would also meet the market demand for centrally located apartments. An increased understanding of the potential of vertical densification gives way to the aim of this thesis to increase the amount of centrally located housing.This thesis provides knowledge of adding storeys and how property owners can identify opportunities in their existing building stock.The first question, What kind of residential densification takes place in Sweden today? highlights ways of residential densification; development of brownfields, infill and adding storeys, where adding storeys is what this thesis then focuses on. The result came through a literature review that also clarified important factors when adding storeys.

In order to evaluate different afforestation methods for exposed heath lands a field experiment was established in Mosfell on southern Iceland in 1989. The trial comprised six different site preparation methods (control, herbicide application, tree shelters, patch scarification, TTS trenching and mounding). In total 960 container seedlings (1+0) and 960 Nisula roll transplants (2+1) of lodgepole pine were planted. Various planting positions (furrow, hinge, no site preparation (control) and on top of mounds) were tested within the site preparation treatments. This study involves renewed measurements and analyses of the trial.After 19 years the overall survival was 51,7 %.

The predominant forestry harvesting method is based on the harvester-forwarder method, theharvester folds, branches and cuts trees, and sorts the logs into piles, while a forwarder transportsthe logs to a landing area.This master thesis work is about realization of a dynamic forwarder simulation model, and itspurpose is to provide an integrated forwarder simulation model in MATLAB/SimMechanicswhere the forwarder is based on a concept using pendulum arms to connect wheels and chassis.Active suspension control is developed and implemented into the simulation model, and finallycompared in simulation with passive suspension.In a first step, an integrated forwarder simulation model is developed, containing a simplifiedforwarder model, a tire-to-ground interaction model and a test track model. The simplifiedforwarder model is based a rigid multi-body system with a spring-damper suspension of thependulum arms. The tire-to-ground interaction model calculates the reaction forces, friction fromthe ground and applies the propulsion force. The test track model is a simplified version of thereal test track in Skogforsk. The propulsion wheel torque control is used to regulate theforwarder speed.

Lotsbroverket is the largest wastewater treatment plant on the Aland Islands and it isdesigned for handling wastewater from approximately 30 000 persons. In 2011,Lotsbroverket produced about 2800 m3 of dewatered sludge. The sewage sludge that isproduced is transported to a contractor where it is processed to eventually be used e.g.in the construction of green space. This study aims to investigate available applicationoptions in terms of the sewage sludge that is produced in Lotsbroverket. The main aimis to study the feasibility of using the produced sewage sludge as a fertilizer in theagriculture of the Aland Islands.The sludge already fulfills limit values for heavy metals in accordance with the Act"The Aland Government´s directive on the use of sewage sludge in agriculture." Inorder to clarify the sludge content of pharmaceutical and organic substances it isrequired that the substances are identified and a risk assessment is performed.

The purpose of this paper is to survey the textile based proto-industrialism in Sweden in the middle of the 19th century. This case study is founded upon Anders Hansson?s pre-industrial textile production at the estate of Mölneby, Östra Frölunda in the rural district of Kind in the province of Västra Götaland.Account books from the year 1853 related to Anders Hansson?s wool fabric manufacturing have been looked into and categorized using a quantitative research method. The research has also been supplemented with a number of interviews.The result of the survey shows that Anders Hansson?s business activities fit into Mendel?s theory of proto-industrialists at a practice level.By collaborating with a merchant in Gothenburg the fabrics were traded in unknown markets, as well as in more familiar neighbouring districts.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.