AbstractTitle:The Mediator?s Qualities - How are the negotiating parties effected by themediator's persistence and patience?Level:Final assignment for Bachelor DegreeAuthor:Johanna Strandberg and Emma HjalmarssonSupervisor:Jens Eklinder Frick and Jonas MolinDate:May 2015Aim:Our aim is to create a greater understanding of the negotiating parties'experience of the mediator's persistence and patience.Method:We have chosen a deductive approach that we have based our empirical dataon already existing research. Theoretical material has been gathered throughliterature, theses and scientific articles. With the background to our aim, we havechosen to use a qualitative approach where we have interviewed ten people who havebeen in contact with a real estate agent the last 24 months. The empirical data wasthen analysed and discussed in our analysis and conclusion.Result & Conclusions:We have found that the mediator's persistence and patienceaffect negotiating partners in various ways.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

This master thesis is an early concept development project about using plastic films and sheets as materials for shaping openings for Tetra Pak packages. It is also a technical introduction highlighting the areas of importance for the development of plastic film and sheets openings. The master thesis has been carried out as a co-operation between Chalmers University of Technology, KTH Royal Institute of Technology and Tetra Pak AB.The master thesis study presents an introduction that gives an understanding of the technical complexities and design possibilities of using thin plastic films and sheets in liquid carton openings. The knowledge is then transferred into five design concepts which points out the areas of opportunity. The technical introduction is widespread and extensive covering current packing trends, the liquid carton package and openings, thermoplastic material properties, and thin film and sheet manufacturing and shaping.

This project was a request of Norrbodal´s Forestry Board, Västra Götaland. It was performed as a qualitative interview analysis of private forest owner?s deficient motivation regarding pre-commercial thinning. The purpose of the project is to investigate what the Forestry Board can do to motivate private forest owners to do more pre-commercial thinning. The results build upon 16 qualitative phone interviews with forest owners that have their forest within the district of Norrbodal. The owners are divided into two groups, the one who have performed the pre-commercial thinning and the one that has possible pre-commercial thinning needs on their properties according to the pre-commercial thinning analysis ,which is the result of a satellite analysis.

The application of the LSS law and how the public organization (Municipality of Hudiksvall) later had to reform their organization to fit the new demands is the foundation to this master's thesis. An internal evaluation was performed due to this reorganisation process within the social care department (LSS unit). The aim was to investigate and evaluate if the reorganization resulted in a better working environment and if the work load (distribution of work) became more evenly divided between the different unit managing directors. The primary empirical information to this master's thesis is collected from that evaluation report. The main aim of this master?s thesis is to answer if the organisational choice between specialised or de-specialised working tasks has an effect (experienced and measured) on the level of stress among the unit managing directors.

Mitt syfte med projektet är att vitalisera stadsdelen Husby i nordvästra Stockholm. Bryta upp zonerade områden och addera fler och varierade funktioner som definierar nya stråk, länka samman omtyckta områden och överbrygga platser som upplevs otrygga. Sammantaget ger det förutsättningar för ett mer levande stadsliv som attraherar fler att vilja bo, bo kvar och göra bostadskarriär i Husby.Centrala begrepp i projektet är mångfald, trygghet, flexibilitet och hållbarhet. Jag har arbetat med att identifiera, bevara och utveckla kvaliteter i kombination med att öppna upp befintlig bebyggelse som präglas av upprepning, slutenhet och rationella byggmetoder samt addera ny bebyggelse för att få en större mångfald och ett mer flexibelt utbud av både lokaler, bokaler och bostäder men även genom att analysera och bearbeta områdets struktur. Fokus har legat på de trafikseparerade miljöerna och hur de kan vidareutvecklas genom att bland annat addera gångvägar och skapa nya stråk längst tillfartsgatorna och samtidigt bevara kvaliteter som de nivåseparerade korsningarna mellan gångvägarna och bilvägarna erbjuder med säker skolväg och en trygg bilfri miljö för barnen..

Road design with focus to safety has been extensively developed in last decades in Nordic and some other EU countries with the main aim to achieve a decrease in a number of accidents and fatalities on the roads. These countries gained many valuable experiences, but they had to sacrifice great effort, expenses, and time to reach the present art-of-state. The purpose of the Master?s Thesis is to review some design approaches with focus to safety and discuss the general way that they may be applied. The Master?s Thesis studies safety in three levels: (i) general - design standards, national safety policies and road hierarchy; (ii) local authority and road administrator; and (iii) three specific safety countermeasures - junctions, pedestrian crossings and traffic calming.

Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

AbstractIn November 2011 the Swedish Government announced that they were conducting an investigation to examine what impact the conversion of existing rental stock to condominiums could have on the development of the Million programme areas. The proposal of converting rental stocks to condominiums aims to help people living in these neighbourhoods to private ownership, while still allowing people who want to continue to rent their homes to do that. This thesis intends to investigate the effects of the proposed reform from a management perspective. The maintenance of the areas built during the Million Programme gets more neglected every year that passes. The majority of the housing stock is rental properties and extensive renovation of the surface layer, tribes and public spaces are essential in all Million programme areas studied. By transforming a portion of the housing stock into condominiums and by improve the living environment through renovations, these areas would be able to gets more attractive.

The parallel bars is used in physical therapy and is mainly used for patients who have to train walking and balance after a stroke or an operation. It consists of two long handrails with two legs on each handrail. These legs go down into two ground-plates and are locked at the wanted height with a pin. The parallel bars is an appreciated device and is used on a daily basis in many care units.The main issue with the manual parallel bars is that it is very difficult and heavy for a single person to adjust the height of it. If a larger adjustment of the height has to be done, the legs have to be adjusted one at a time otherwise the they will be locked.

 AbstractThis Master?s thesis analyses the dynamics of the medieval counterweight lever engine, ortrebuchet, a type of mechanical artillery. The purpose is to study the differences between different types of these machines, and see if computer simulations can be used to validate preserved advice on construction. Simulations include machines with a fixed counterweight, a hinged counterweight and a combination of both counterweights.Due to the almost complete lack of archaeological finds and insufficient historical source material there are still, after more than a century of research, many unanswered questions concerning the design and performance of these machines.The present study is based on an analysis by Jahsman (2004). A more detailed mathematical model employing Coulomb-friction is used.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

The storm Gudrun January 8-9 2005 felled about 70 millions cubic metres forest in southern Sweden. The majority of the wind damaged forest was spruce (Picea abies). In order to decrease the risk of wind damages in the future other trees species are of interest for forestry in southern Sweden. The purpose of this master thesis was to study if larch were more wind tolerant than spruce. The method was to compare larch, Japanese larch (Larix kaempferi Lamb.), European larch (L.

The effects of Reindeer mechanical damages on the planted regeneration of Pinus sylvestris and Pinus contorta. Semi-domesticated reindeer can damage young trees. In late winter reindeer rub their antlers against young trees. The aim of this study was to quantify those damages. This study covered planted objects from three different areas in northeastern Sweden.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.