The present project was initiated with the aim to create pattern modules for use in public environments. My intention was to let the properties, of the specific materials used, have a marked influence on the realisation of the final form. I also wanted to find a material, which is suitable from the perspective of sustainabilityand possibilities to create modules from it. The work was initiated with a study of some candidate materials and many sketches before I finally made my choice. My decision was clear after a visit to the company Glasfabriken inKalmar.

Corn is an important food and feed crop in the world, in Sweden it?s up till now grown on limited acreages mainly for silage. But I think it can get more important if you can grow it also for grain, because it?s a good animal feed for example, for life stock-, pigsand poultry. On of corns advantage is that it can produce the same amount of dry matter as for example wheat, barley and rise but with 25% less water. I will examine if it possible to grow corn for grain production in the south of Sweden.

The purpose of this master thesis is to implement and validate a Power System Stabilizer (PSS) to a generator at Trängslet hydropower station in Dalarna, Sweden. Problems with local rotor oscillations can occur at the hydropower station when power is transferred on a new power line (130 kV) from Northern to Southern part of Dalarna. To ensure good operation properties on this power line Fortum Generation AB and Fortum Distribution AB wants to activate a PSS on a generator.There have been investigations in which situations and what equipment that contributes to rotor oscillations. When this is known the PSS is tuned to damp these oscillations by choosing a good set of parameters. The most important parameters for good performance are to choose amount of gain and phase compensation.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

The purpose of this study was to investigate how Islam and Muslims are portrayed a) in results from studies on Swedish teaching materials, and b) in articles in Swedish media newspapers. The study was conducted through two separate studies. In the first study, five previous research reports on how Islam and Muslims are portrayed in Swedish teaching materials were analysed in order to discern the main results regarding the portrayal of Islam and Muslims. In the second study, newspaper articles from 11 Swedish newspapers were analysed in order to discern which central themes emerge in the description of Muslims and Islam in said newspaper articles, as well as which properties and features are attributed to Muslims and Islam in the articles studied. In both studies, the data was analysed inductively through a qualitative content analysis.

Roseroot (R. rosea L.) has gained more attention the last years, mainly because of its phy-topharmacologic properties. Even though many reports in roseroot have been published, only a few articles are dealt with the genetic diversity. The Nordic Genetic Resource Center has collected Roseroot material from Sweden, Greenland and Faroe Islands under different expeditions. The samples were analysed to study the genetic diversity study.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

The unique ability of wheat to produce leavened bread is mainly due to the gluten proteins present. As consumers are more and more attracted to bread with high fibre content the use of wheat gluten will also increase in order to obtain bread with good volume and appetizing characteristics. Air-classification is a technological method used to separate particles by size and shape by means of air-streams into two fractions, fine and coarse. When used on wheat flour it is known to alter the flour composition in the fractions obtained compared to the original flour. This method is not widely used in the milling industry but could possibly be of interest if protein rich fractions with favorable protein quality can be produced.

Bakgrund: För tidig eller för sen urträning från ventilator kan ge negativa konsekvenser för patienten, därför bör det identifieras när patientens tillstånd tillåter detta. Med anledning av det och att ansvaret för urträningen övergått mer från läkarna till sjuksköterskorna har det utvecklats hjälpmedel såsom evidensbaserade urträningsprotokoll. Dessa medför en mer samstämmig behandling och har också visat sig leda till kortare behandlingstid med ventilator. Olikheter i vårdpersonalens kunskap, utbildningsnivå, erfarenhet, ansvarsområden och hur organisationen ser ut påverkar hur urträningen genomförs. Syfte: Att beskriva intensivvårdssjuksköterskors uppfattning om urträning från ventilator. Metod: En empirisk fokusgruppintervjustudie med kvalitativ och deskriptiv ansats genomfördes.

I detta kandidatarbete skapas en animation för att visualisera användarinstruktioner för en balpress. Förberedelser utförs i 3D-CADprogramvaran Geomagic Design 2014 innan arbetet med animeringen påbörjas i programmet SimLab Composer Animation. I förberedelserna rensas modellerna och modifieras. Modeller som saknas skapas. I detta förslag på visualisering av ett moment i användning av balpressen är i syfte att underlätta för brukaren hur den snabbt kan använda maskinen. Användarens perspektiv sätts i fokus hur den kan tänkas betrakta och uppfatta maskinen genom instruktionerna i animeringen.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

The author contacted designers Claesson Koivisto Rune Arkitektkontor in August 2007regarding his Master thesis at KTH. The company had discussed the possibility of creating achair made from molded pulp. The author was taken on as a manager for the project. Theobjective was to produce design documentation for a paper pulp chair which was to belaunched at the in 2008 Milan Furniture Fair. The purpose of the thesis was to develop aproduct with scientific methods as well as to investigate how to make collaboration betweendesigners and engineers easier through communication.The project went through four basic stages: Information, Analysis, Synthesis and Evaluation.Information on paper pulp, molded pulp, chair design, sitting postures and the existingmarket of molded pulp furniture.

AbstractObjective: The aim of this study was to investigate the statistical properties of a self-assessment instrument for depression, Känsloläge, with regard to validity, reliability and factor structure. Method: The data collection method used for the study was mail questionnaires. The sample consisted of patients who had received treatment for heart failure, arrhythmic disorders or coronary heart disease at a hospital in Uppsala, Sweden. The study population consisted of 53 patients. The self assessment form?s validity was analyzed by measuring the criterion validity.

The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.

Boplatsvallar, often translated as semi-subterranean settlements, is an ancient monument with a diffuse definition. Defined as ?embankments that partially or completely surround a often lowered/dug down surface- this category of ancient monuments is also made up of a former category which traditionally was interpreted as winter settlements from the late Stone age in Sweden. This view of the ancient monuments carried over, to a certain extent, to this new definition. Should this be the case, that this category of ancient monuments are remains of winter settlements,  used recurringly over an extended period of time, then they should exhibit similar signals in regards to the distribution of the anthropogenically altered soil chemical and soil physical properties at the sites.The area around Lillsjön, Anundsjö parish in Ångermanland, have four boplatsvallar located separately in the regional area.