This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

The development of IT systems is usually accomplished by some form of system development methodology. It can be performed as the waterfall method, where each phase is completed before the next begins. One of the reasons to follow a development methodology is that the process is more structured, faster and that the product will have higher quality. One risk of not using a system development approach is that the code can be unstructured and difficult to maintain.This paper describes an alternative method in which the development occurred without the use of any system development methodology. This has been possible because there was a clear goal of the program that should be developed.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

Foreign invested SMEs have recently become increasingly interested in China. The enterprises are in this report categorized as second wave companies since they follow the footsteps of previous pioneers, of which mostly were larger companies. The ambitions of the SMEs are either to sell products on the ever expanding Chinese market or to utilize the potential of low cost production for global markets. The existing literature is fragmented and solely based on the experience of larger companies. We believe that SMEs are facing new and different challenges, and thus a new generic theoretical frame work is desirable.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

The purpose of this paper is to investigate and analyse the private researchers encounter with the Royal Library, national library of Sweden. The main focus is on answering the two questions: who is the private researcher and what is his/her impression of the Royal Library? These questions are answered from the vantage point of the following theoretical perspectives: library anxiety, Bourdieu, library architecture, gender studies and service management. The methods used are qualitative interviews, and textual analysis using the printout of these taped interviews along with notes and an earlier user study as material. The conclusions are that barriers with staff is the most frequent factor of library anxiety in the private researcher at the Royal Library, and mechanical barriers the least frequent.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Clinicians in veterinary practice have responsibilities for the development of global antibiotic resistance. In some cases, antibiotics are contraindicated or even useless in wound treatments and therefore other options are needed. Antiseptics may be another option but their use are controversial and may be questioned by owners. As professionals, it may be very difficult to be able to motivate this choice of treatment. The aim of this paper is to gain knowledge about four antiseptics; iodine, silver, polyhexamethylene biguanide (PHMB) and honey to make it easier for veterinary nurses and other clinicians in veterinary practices to decide their potential use. The assessment will be made with consideration of the available evidence concerning the properties, usability and the animal?s experience. The results showed a lack of evidence in in-vivo studies in horses, particularly studies within the field of veterinary nursing.

Syftet med examensarbetet har varit att undersöka möjligheterna att utveckla, producera och lansera en ny universell laddare. Målet har varit att kunna ladda så många modeller av så många produkter som möjligt, vilket innefattar mobiltelefoner, kameror, datorer och MP3-spelare etc. Arbetet skulle leda fram till ett förslag på produkt.Genom att undersöka befintliga patent och produkter, har marknaden granskats och slutsatsen är att det finns en uppsjö av universella laddare på marknaden. Dock finns det få produkter som inger säkerhet, möjliggör multipel laddning och som är stationära. Dessa egenskaper blev grundstenar i den kravspecifikation som utarbetades.

The Swedish real estate market has experienced an intense increase of demand during the last ten years. Thus, people regularly visit real estate websites, as well as home improvement and interior design have become extremely popular. However, the Swedish real estate agencies still have not developed a theoretical framework on how to most effectively market the properties. The main purpose of this study was to investigate how interior in apartment advertising affects the buyer's interest in the apartment, and furthermore to start building a framework for how to effectively use interior as a marketing tool. The study connects theory regarding social identity, advertising effectiveness and product personality in order to investigate consumer behaviour in the real estate market.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

This master thesis is about designing and dimensioning a boat for transport of caravan, car, trailer or ATV. Buoyancy and stability are important properties as the pontoonboat should also be able to serve as a workboat. Many of the vessels on the market today that is being used for similar purpose are stable enough, but their hull is often similar with barges and thus too slow. This work has been to construct a boat that has good stability but also has a hull that enables it to move faster, is more maneuverable and having a more attracting design than today?s barges.

Syftet med studien var att undersöka sambanden mellan Dark Triad (de mörkapersonlighetsdragen Machiavellism, narcissism och psykopati), Sociosexuell orientering(beteende, attityd och lust till att medverka i tillfälliga sexuella relationer) samt Religiositet.En korrelationsanalys utfördes för att undersöka sambanden mellan variablerna och enmodererande multipel regressionsanalys (MMR) utfördes för att undersöka om religiositetmodererade effekten av Dark Triad på sociosexuell orientering. Deltagarna bestod avamerikaner (N =309) som svarade på en webbenkät via Amazon Mechanical Turk (MTurk)vilken innehöll Dark Triad Dirty Dozen (DTDD) och the Revised Sociosexual OrientationInventory (SOI-R), dessutom angav de religionstillhörighet/ingen religionstillhörighet.Dark Triad hade ett positivt samband med sociosexuell orientering, men inget sambandmed religiositet. Sociosexuell orientering hade ett negativt samband med religiositet.Religiositet modererade inte effekten av Dark Triad på sociosexuell orientering. Resultatenbekräftar delvis tidigare forskning. Trots att religiositet inte modererade effekten av DarkTriad på sociosexuell orientering, borde detta förhållande undersökas vidare eftersom ingentidigare forskning gjorts på området..