The aim of this master?s project is to explore ways to perform piano music conceived dramatically. I do this through performance of Beethoven?s Appassionata Op. 57 and of Scriabin?s Piano sonata no.

The tomato is an important crop worldwide, and in recent years it has received great attention due to its rich content of carotenoids, which in studies indicate to have health benefiting properties. Many studies have been done in this area of research and in how to optimize the carotenoid content in tomatoes and tomato products. The objectives of this essay were to summarize present data in this field. The results were as follows:There are nine different carotenoids identified in tomatoes. Lycopene and ?-carotene are the ones that have been given the greatest attention.

A stay in the neonatal intensive care unit of greater than 5 days is one of the identified risks ofa sensorineural hearing loss. Preterm infants usually have at least one risk factor for hearingimpairment. The period from 25 weeks' gestation to 5 to 6 months of age is most critical tothe development of the auditory system. We think it is important to investigate hearingimpariment among infants born preterm, degree and type of hearing loss, risk factorsassociated with hearing loss and how the auditory system may be affected by preterm birth.ObjectiveA critical review of the current literature including studies of preterm infants born betweengestonal age 25-37. Our aim is to identify the most common type and degree of hearing lossamong infants born preterm and if there is an association between hearing loss and pretermbirth.MethodA literature search of Scopus and Pubmed resulted in 16 articles from 2000-2015ResultsMost of the infants in this study had a severe to profound sensorineural hearing loss.

The tribo system ice-curling stone was investigated in order to understand the mechanisms behind the stones' behavior on the ice sheet. The problem with non-identical stones should also be addressed.The stone curls, that is, its sliding path deviates from a straight line to the right for a clock-wise rotation and to the left for a anti-clock-wise rotation. Several mechanisms to explain this behavior have been proposed over the years but none has been successful.By carrying out experiments at the local curling rink and studying silicon castings of ice- and stone-surfaces with scanning electron microscopy and vertical scanning interferometry, it has been decided that the curl is not due to dry friction, ice-debris or the difference in friction on the left and right side of the stone. The side force comes from the fact that the friction is higher at the back of the stone than at the front.The contact between stone and ice is never completely dry, nor in the hydrodynamic lubrication regime. It is probably a combination of hydrodynamic lubrication and a contribution from mechanical scratching of the ice.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

The need of raw material does of course fluctuate but the long term view is an increasing demand due to the growing consumption of sawn timber products, pulp, paper and lately also biomass. This has led to a keener competition for wood. At the same time there is an ongoing structural change of a significant part in the Swedish wood supply market, the private forest owners. In 1992, 22 % of Sweden´s 335 000 private forest owner lived apart from their forest. In 2007 this figure had risen to 36 %.

This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.

Unauthorized changes in listed buildings and environments occur all around Sweden. The main purpose of this thesis is to examine how these forms of transgressions have been and are being handled in some Swedish county administrations. What do legislation within conservation of heritage expresses when transgressions occur? How do county administrations interpret and apply legislation to actual situations? What methods do county administrations make use of to prevent unauthorized changes?16 out of Sweden´s 21 county administrations have been studied and used as an empirical basis. This basis has led to a general conclusion of the county administrations experiences and working processes when handling unauthorized changes in listed buildings.

The essay deals with hierarchies that occurs between inmates in prison. It deals with a theory that these hierarchies, when seen through a gender perspective, can be understood as a hierarchy where you are valued based on traditional male characteristics. Empirically, the paper consists of interviews with five inmates, or former inmates, who during a period in his life, has served a prison sentence at a closed institution. Based on the informants' statements, conclusions are drawn about which properties are valued low in the hierarchy. This becomes clear when the informants speak humiliating about sexually deviant groups, snitches, or sex offenders.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This report covers the thesis done by mechanical engineering at the engineering program at the University of Halmstad. Student Work Development of packaging in the food industry includes 15 credits and has performed over 20 weeks in spring 2009. The thesis work is a compulsory part of education and aimed at the student must apply the knowledge it has given during training in a project related to reality. Student work has been carried out in cooperation with Hanson & Möhringen AB and the project's main objective was to develop an environmentally friendly packaging to their brand Falk Salt. When salt is one of the world's cheapest commodity was packing all the costs have to be as low as possible.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

A helicopter based system equipped with a millimetre-wave fire control radar is studied for improvement of the detection probability for moving ground targets. The system is a pulse doppler radar that sends out the electromagnetic wave in repetitive pulses. The frequency in which radar sends this pulse is called Pulse Repetition Frequency (PRF). The velocity of the moving targets is measured by spectral analysis of the pulses received. With this sort of system some targets will not be possible to detect.

Water is our most important provision and its quality is above all dependent on the geological conditions in the area from where it is extracted. Due to geological properties there are certain areas with an elevated risk of high uranium levels in the ground water, which in turn constitutes a risk for human health. Consumption of water that contains a high concentration of uranium implies a health risk due to the chemical characteristics of uranium. Livsmedelsverket (The National Food Administration) and Socialstyrelsen (The National Board of Health and Welfare) therefore recommend that precautionary measures should be taken when the uranium concentration in ground water exceeds 15 micrograms per litre. In particular, drinking water collected from wells in areas with uranium-rich bedrock may have a harmfully high level of uranium. One of the wells of the Ärla water purification plant, located near Eskilstuna, Sweden, contains water that exceeds the guideline of 15 micrograms per litre. One interesting technique for removing uranium from drinking water is adsorption to reactive filter materials.