Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Holmström, M & Jangvert, M Protokolliserad urträning från respirator. Att ha en plan är viktigare än hur den ser ut och en plan fungerar bara om du använder den. Examensarbete i omvårdnad 15 högskolepoäng. Malmö högskola: Hälsa och samhälle. Utbildningsområde omvårdnad 2011. Respiratorbehandling är en livsavgörande behandlingsinsats för kritisk sjuka in-tensivvårdspatienter.

Thermia Värme AB is one of the market leading manufactures of heat pumps. In order tomaintain this position, the company wants to improve the vibration characteristics of theirproducts. The aim of this thesis is to develop product design changes that lead to a reductionof vibrations in the heat pump Thermia Diplomat 8.The main cause for vibrations in the system is flow pulsation and mechanical forces inducedby the scroll compressor. Vibration is transmitted through the compressor piping and receivedby the heat exchangers, from where it is further transmitted to the connection points for theradiator and heat source circuits.A number of design changes in order to improve the vibration characteristics have beenevaluated through calculations and practical experiments. The changes have included thecompressor and heat exchanger mountings, the compressor suction and discharge line pipingand also pulsation dampening.The results of the experiments show that the vibration levels in the connections for the heatingand brine circuits can be decreased strikingly through changes in suction and discharge linepiping.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

The work is performed at Forsmark Group AB as a final step in the Bachelor ofScience program in nuclear engineering at the University of Uppsala in 2013.The work is part of an ongoing process of streamlining project system model FKA.Streamlining the project model is an important aspect that affects all largecompanies that somehow have a project governing body when there is muchfinancial resources to save. Although the quality of the projects is positivelyaffected by efficiencyThe aim is to find possible common weaknesses and strengths of the project systemby interviewing a number of project managers, and using the systems in placeexamine the model.As part of the work also includes examining what project managers have to adjust tothe newly implemented system VPMM, and other newly introduced elements thathave been added to improve the efficiency in the futureProject System is a complex system that is influenced by many different parametersand participating individuals' attitude and personality. But then small changes in themodel could have major economic consequences.The thesis has generated results that show common weaknesses among the variousprojects and their project managers' general opinions about the project model. It alsopresents some possible solutions based on own thoughts and those interviewedobjects suggestions and comments..

This Diploma work investigates internal air ventilated crawl-space in respect to construction and damp. The Diploma work assumes from a general description of crawl-space and general dump problems in ground construction. An internal air ventilated crawl-space is a construction where you take the ventilation air from the building and bring it down to the crawl-space and lets the air circulate before it passes through a retaining aggregate on the way out from the crawl-space. In this matter you get a worm space under the building and a lot less dump problems in form of · Ground damp · Build damp The ground dump reduces through draining around the building, different layer of gravel between the ground and the building and ventilation of the crawl- space. The build dump reduces through ventilation of the crawl-space as fast as possible.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.

Intern företagsutbildning via e-learning är ett aktuellt ämne, framförallt eftersom företagen ser det som en chans att bli effektivare och spara pengar. Av de fretagsanpassade utbildningsapplikationer som finns på marknaden idag, är nästan samtliga skapta för att förklara fr användarna (kursdeltagarna) hur saker och ting ska fungera. Deras stora svaghet ligger dock i att förklara och förmedla varför dessa saker fungerar, varpå man riskerar att misslyckas med att förmedla en djupare förståelse och skapa en bättre kunskapsbas. Därför finns det troligen många anställda på företag som har fått lära sig hur allt runt om kring dem fungerar, men inte varför det nu fungerar som det gör. Denna examensrapport redogör för vårt arbete med att ta fram en webbaserad applikationsmodell, utvecklad i Adobe Flash, tilltänkt för utbildning, och som på ett enkelt men effektivt sätt synliggör hur olika typer av företagsflöden fungerar och, framförallt, varför de fungerar på detta sätt.

Marknaden för mobila system har utvecklats enormt snabbt de senaste åren. Idag är det ett område med en allt större omsättning och det har vuxit fram som en helt ny gren inom Software Engineering. Utvecklare av mobila applikationer står ständigt inför en utmaning när det gäller att välja vilket mobilt system man ska satsa på när man utvecklar applikationer. Valet av system kan vara helt avgörande för om man hittar rätt målgrupp av konsumenter och därmed kan generera tillräckligt med omsättning för att driva lönsam utveckling av applikationer. Det räcker inte att enbart kolla på vilket system som har mest användare eller vilket system som genererar mest omsättning, utan man bör noggrant överväga de förhållande som gäller för just den applikation som ska utvecklas.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

This research paper is a thesaurus construction for the interdisciplinary subject of landscape planning. The personnel doing the indexing of documents at the Swedish University of Agricultural Sciences had earlier expressed a need for such a work within the fields of Landscape Architecture and Landscape Engineering. However our objective was not to create a complete thesaurus, but instead a basic construction which the personnel at the Agricultural University could expand upon. The actual construction is based upon ISO 2788-1986, Documentation Ð Guidelines for the establishment and development of monolingual thesauri, and Aitchison, Gilchrist and BawdenÕs Thesaurus Construction (1997). The line of enquiry taken has dealt with the problems relating to the collection, selection and control of indexing terms.

The management of information is one of the key aspects within a successful andefficient product development process, particularly regarding complex products.Scania CV AB is at the moment developing a new IT-system, OAS, which aims tomanage the company?s product data. With this as a background, the purpose of thismaster thesis is to identify the cross-functional user needs within Scania?s organizationconcerning product data and the management around it.To fulfill the purpose, an empirical study consisting of 40 personal interviews with 50representatives from different functions within Scania?s organization was carriedthrough. The empirical data was then analyzed focusing on identifying thecross-functional needs and issues.The study points out that there is a big potential regarding improvement among themanagement of product data.

The aim of this study was to investigate preschool teacher?s perceptions about the curriculum goal concerning simple chemical processes. The result was based on narratives received by a qualitative study and semi-structured interviews of six preschool teachers. The results of the study showed that preschool teachers perceive that they actually are working in a relatively small scale with simple chemical processes and they do not really know what simple chemical processes are, and do not feel very familiar with the subject. Water, dough, mud, paint and baking were the most common activities that were used when working towards the curricular goal. However, it was never explained to the children that it was simple chemical processes they were working with during the activities, neither was it discussed among colleagues because of the uncertainty about the concept.