Sök:

Sökresultat:

1779 Uppsatser om Mechanical engineering - structural dynamics - Sida 21 av 119

Analytisk dimensionering av räddningstjänst : fördjupad analys av insatsförmåga och täckningsgrad inom Räddningstjänsten Syd

In order to reduce the number of casualties and injured from accidents the rescue service must become more efficient and flexible. It is noted that far more people is injured and killed in traffic accidents than from fires. During the daytime the number of accidents in about three times higher than during the night, even so today the number of fire fighters on duty is the same day and night.Two computer models for simulation of different locations of the rescue services are used to determine the best options for placement of the rescue services. A cost-benefit analysis is also used to determine if today's fire stations are efficient for the society from an economical point of view.The results of the different models are that the fire station in Lund is misplaced. The number of ladders in Malmö can be reduced.

Stöd eller tillrättavisning : En kvantitativ studie om socialarbetares attityder till ekonomisk rådgivning som metod

The aim of this bachelor thesis was to examine attitudes among social workers, particularly their attitudes toward their clients? poverty and towards economic counseling as a method. A further aim was to study the relationship between attitudes towards poverty and economic counseling. Primary data used for the study was assembled among social workers (n = 111) with the use of an electronic questionnaire that was sent out to social welfare offices in 34 city districts in Stockholm,Gothenburg and Malmö. The findings showed that a majority of the social workers had a structural understanding of poverty and a positive attitude towards economic counseling.

Framtagande av kravspecifikation för standardsystem

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

Regioner i förändring - En komparativ studie av de svenska och danska strukturreformerna

The purpose of this thesis is to critically investigate how to understand the regional transformations that are occurring in Sweden and Denmark. At a higher level of abstraction the results can be generalised to a wider context and I have found that there is an ideological hegemony that explains the regional transformation. Nation states are reterritorialising due to a changing world where global capital is becoming increasingly flexible and competition between states, regions and municipalities is needed to adjust. By using Sandberg's model of structural reforms I have shown that the differences between Sweden's and Denmark's reterritorialisation are due to differences in national political culture and existing administrative systems. In fact these two structural reforms are based on the same regionalist ideology as a reaction to the changing global economy.To investigate the regional transformations I have carried out an idea and ideology analysis on the recent Swedish proposal from Ansvarskommittén, Strukturkommissionen in Denmark and the proposal by the Danish government which was carried out in 2007.

Familjediskursen : 1998-2008

Purpose/Aim: The purpose of this essay is to see how the media, through the newspaper, "Vi föräldrar?, produces family and parental roles, and to investigate how the image changed over time.Material/Method: The material consists of a number of selected texts from the years 1968, 1988 and 2008. The method used is a discourse analysis based on the three level model by Norman Fairclough. The three levels are the text, the discourse practise and the sociocultural practise. In this study two of the levels, text and sociocultural practise, are used in analysing the texts.Main results: Family and parenting in the texts from 1968 can be linked to the structural functionalist theory in which the core family is central and women and men are assigned to specific roles.

Testdriven utveckling

I programmeringsvärlden har en ren, enkel och testbar kod en stor betydelse. Detta examensarbete avslöjar ett nytt koncept vilket kanske är den viktigaste upptäckten inom metodområdet på senare tid, så kallade Testdriven utveckling (TDD). Testdriven utveckling är ett sätt att utveckla mjukvara och det som utmärker den är att man först skriver ett test som inte ska fungera (röd fas), sedan skriver man en kod, så enkelt som möjligt, som gör att testet ska fungera (grön fas) och till slut ska man våga göra förändringar även om koden fungerar, om man är inte riktigt nöjd eller om man helt enkelt vill optimera sin kod (omstrukturera fas). Syftet med studien var att utvärdera vilka fördelarna och eventuella nackdelarna är med den här typen av mjukvaruutveckling, att motivera varför det är lämpligt att välja den och att visa hur man gör med hjälp av Java, JUnit och Eclipse. Material som användes i studien insamlades genom litteratursökningen och intervjuer.

Kostnadsutjämningen inom Barnomsorgen i Sverige - en diskriminantanalys

Sweden?s District councils and Country councils are in itself to a large extent responsible for the state financed welfare. Because of this, Sweden has a contribution- and adjustment system. The reason for this system is to create equal chance, for all District councils and Country councils, to be able to give the citizens service independently of their income and non-influential structural differences. The adjustment is built upon the so-called standard cost method, which contains four different parts.

ENERGIANVÄNDING PÅ BYGGARBETSPLATSER : Analys av införandet av energieffektiva bygg­etableringar

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.

I strävan efter en bättre värld : En idéanalys av två synsätt på utveckling och internationellt utvecklingssamarbete.

The aim of this dissertation is to examine and compare William Easterly?s and PGU?s (Shared Responsibility: Sweden's Policy for Global Development) different views on development and international development cooperation. The methodological approach chosen in this study is an analysis of ideas based on the following questions:1. Which principles should be applied to development and international development cooperation?2.

Epoxidised linseed oil as hydrophobic substance for wood protection : technology of treatment and properties of modified wood

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.

Striving for innovation; working in CFT - a case study of Audi

The purpose of this thesis is to study and determine how working in cross functional teams can generate value in an effort to facilitate innovation. An inductive scientific perspective is chosen as the research approach. A single case is investigated with the theoretical framework based on Resource Based View, Intellectual Capital, Innovation theory and theories concerning Cross Functional Teams. The empirical material has been collected through primary data; surveys, interviews and secondary data; literature, websites and further complementary data. The practice of using Cross Functional Teams will enhance organizational learning, knowledge transfer, increase communication and innovation, which in turn will increase the speed and performance of the new product development process.

Fel i produktionen : En studie om uppkomna fel i två anläggningsprojekt

AbstractThe purpose of this study was to identify problems that may occur in the execution of a civil engineering project and suggest measures to reduce the risk of errors. The study was conducted in cooperation with a civil engineering company in the Gothenburg area. During two weeks in February 2012, a field study took place on two construction sites where disruption and problems that took more than 15 minutes to correct were noted. During the field study we identified 39 such occurrences in the projects and then these were classified into different categories according to their cause.The two largest categories were "Design" and "Planning", which accounted for half of the errors that were discovered.In the study results were evaluated to decide whether it was possible to detect discrepancies at an earlier stage. The cost to fix an error in the design stage may be significantly less than to correct the problem in production.According to the evaluation, 55% of the errors could have been detected earlier if there was a greater degree of observation for such issues by everyone involved in the project.

y måste bero av x ? gymnasieelevers förståelse av det matematiska begreppet funktion

Objective: The aim of the study is to describe pupils' understanding of the mathematical concept of function. How do pupils define the concept of function? What images of the concept of function evoke when they solve tasks, which involve identifying and constructing functions?Theory: A student's thinking about a mathematical concept depends on more than just the formal definition of the concept; therefore Tall and Vinner introduce the term concept image to describe the role cognitive structures play when students learn about concepts. The cognitive structure includes all mental images, associated properties and processes that an individual associates with a given concept. According to Sfard, an individual's understanding of mathematical concepts may have different character: an operational conception, where a concept is conceived as a process and a structural conception, where the given concept is conceived as an object, that is, as a whole.Method: 16 pupils at the Science Program at two different upper secondary schools inSweden answered a questionnaire on the mathematical concept of function.

Hur kan erfarenheter från olycksundersökningar nyttiggöras på lokal nivå samhället? - utifrån ett MTO-R (Människa, teknik, organisation och riskhantering) perspektiv

The theme in this report has been how to benefit experience from accident investigations. The demand on the municipality to perform accidet investigations is relatively new, and maybe they aren?t clear what the demands means. This causes that there might be a problem to benefit experience from accident investigations, for improving the overall safety in the municipality. The main purpose of this report has been to clarify how experience from accident investigations, can be of benefit to society on a local level.

Nytt koncept för linspridning

Sammanfattning Projektet, Nytt koncept för linspridning, vilket tillhandahölls av Abu Garcia, bestod i att vidareutveckla multiplikatorrullen, Ambassadeur Classic 5000c. Målet var att konstruera en multiplikatorrulle, med vilken fritt utkast erhålls. På dagens multiplikatorrullar passerar linan genom linspridaren, detta medför att linan följer linförarens rörelse under utkastet. Till följd av linförarens rörelse genereras friktion, vilket i sin tur ger ett kortare kast. För att öka kastlängden, skall linspridaren ej vara i kontakt med linan under utkastet. Det är dock viktigt att linan sprids direkt på spolen vid påbörjad invevning.

<- Föregående sida 21 Nästa sida ->