The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

I denna rapport redovisas arbetsgången för produktutvecklingen av ett rullstolsunderrede med nya design- och konstruktionslösningar. Det slutliga konceptet är ett underrede med två centrala konstruktionslösningar; en hydraulcylinder som medger vertikal sitthöjdsjustering, samt en vaggfunktion i sittplattan som medger ökad balans vid vinkeljustering. Samtliga funktioner på underredet har anpassats för att erbjuda ett enklare och renare ramverk..

Diesel electric propulsion is in many ways a good alternative to conventional shaft propulsion, both economically and environmentally. There are also many other good side effects which need to be considered, i.e. better manoeuvrability, more efficient use of space and less noise on board. However, there are applications where diesel electric propulsion is not profitable. Large ocean going ships? profitability is much depending on fuel costs and the diesel electric alternative cannot compete on long journeys with large low speed engines.This thesis will treat the aspects of choosing between a diesel electric system and a classic mechanical propulsion system.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

This thesis examines the retrieval effectiveness of two Web search engines. The two search engines are chosen to represent two different types Google as a broad general search engine and Dogpile as a broad general metasearcher. Twenty queries have been used and the first twenty hits for each query were evaluated for relevance. The queries were invented by the authors, based upon their interests and information needs. They were expressed in a general manner, by using one or several keywords, in accordance with the simple search mode available for each search engine.

The city is complex, multi-faceted and fascinating. The same can be said about the rooms of the city. The experience of the rooms of the city can be described in as many ways as there are individuals. The question concerned in this essay is How can you describe the rooms of the city as a phenomenon and how can you describe the experience of these rooms in general? The concepts city and room are widely understood and neither of them has a description that can be used in all situations.

Titel: Kommunicera rätt! ? En studie om kommunikation mellan systemutvecklare med kundkontakt och kund. Författare: Peter Johansson Oskar Hanson Handledare: Johanna Törnquist Examinator: Guohua Bai Problemområde: Anledningen till detta examensarbete är att problem som kan uppstå vid systemutvecklingsprojekt vanligtvis har sin grund i kommunikationen mellan systemutvecklare med kundkontakt och dess kunder. Exempelvis hör en systemutvecklingsgrupp och ett bageri till två vitt skilda yrkesområden och därmed pratar de ?olika språk?, vidare kan det skapas semantiskt brus i kommunikationskanalen som i slutändan kan leda till en felaktig kravspecifikation och de verkliga förändringsbehoven förblir oupptäckta. Hypotes: Examensarbetet baseras på hypotesen: ?Semantiskt brus[1] i kommunikationskanalen[2], otillräcklig negativ feedback[3] från sändare[4] och mottagare[5] och svårighet att hitta rätt nivå på samtalet med hjälp av kodning[6] och avkodning[7] ger upphov till en felaktig bild av kundens verkliga förändringsbehov[8] .? Slutsats: Alla delar ur Shannons kommunikationsmodell tillsammans med cybernetikens negativa feedback påverkar resultatet vid framtagande av kravspecifikation. Delar som både teori och respondenter tar upp är att som konsult måste denne ?kunna tala kundens språk?, hitta rätt nivå på samtalet, ge och ta negativ feedback samt undvika semantiskt brus i kommunikationskanalen.

This bachelor thesis covers fire protection methods of structural steel and the aim is to develop an information tool designed for inexperienced structural engineers. The information tool covers basic fire protection methods and the general way to produce a fire resistance for structural steel. The layout of this information tool is a simple folder that contains information about the most important steps when producing fire protection for a steel structure.The thesis starts with a general overview of the fire protection needed in buildings to fulfill national legislative and regulatory requirements. To get an understanding of how steel components behave during the influence of fire, a brief overview is presented of the material properties of steel. This chapter also contains a review of previous research in the area.

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

Målet med projektet är att utveckla ett system där det skall gå att komma åt information från en intern databas på ett enkelt sätt med en mobil enhet. Eftersom varje enskild databas är unik så skall det gå att justera systemet enkelt genom ett administrationsgränssnitt så att det passar till varje databas. Informationen är oftast känslig och skall inte åtkommas av obehöriga användare, så den mobila enheten behöver autentiseras för att skydda informationen. Systemet kommer alltså bestå av ett par applikationer:1. Webbtjänst som skall kommunicera med databasen och skicka information till webb- och den tjocka klienten.2. Webbaserad klient, skall kunna visa data från databasen.3. Tjock klient, skall kunna visa samt uppdatera data från databasen.4. Administrationsgränssnitt som skall kunna konfigurera webbtjänsten. För autentisering av användaren används telefon ID:et och sköts automatiskt av den tjocka klienten.

This paper deals with variations in the osteological material of dog (Canis familiaris L.) from the Mesolithic Scania, southern Sweden. The general aim is to discuss the use and specialisation of dog during the period, and differences or relations between cultures and traditions within the Mesolithic period. The study is based on a analysis of the bone material from the sites; Ageröd I:A-D, Ageröd I:H-C, Bredasten, Bökeberg III, Hög, Löddesborg, Ringsjöholm, Segebro, Sjöholmen, Skateholm I-II and Tågerup, phase 1-3, with datings from Late Maglemose Culture to Early Ertebølle Culture. The seminar paper also includes descriptive statistics of the osteometrical data of Denmark, from several studies of Degerbøhl (1927) and Noe-Nygaard (1995, 2003). The study is focused on the relation between size, robusticity, muscle grooves and ligaments of mandibula, tibia, radius, humerus, femur and metacarpalia/metatarsalia.

The purpose of this literature study was to describe techniques for monitoring general anesthesia and standing chemical restraint in the horse. A number of various techniques and devices related to e.g. blood pressure measurement, blood gas analysis and pulse oximetry are defined, and finally their clinical relevance and reliability are discussed. The equine patient is generally far more exposed to anesthesia-related risks than other smaller species. Complications such as hypotension and hypercapnia are commonly seen during general anesthesia. Thus, close monitoring is essentially performed by the veterinary nurse, whom is responsible for monitoring the anesthetized patient.

Störnings indikation på lågspänningsnät. Detta examensarbete har kommit till som ett resultat av företaget Öresundskrafts arbete med att installera ny teknik för datatransmission över elnätet. Uppgiften var att indikera störningar mellan 5-95 kHz på 400 V nätet med hjälp av en applikation för förenklad insamling och loggning av mätvärden baserad på ett oscilloskop kopplat till en dator via GPIBprotokollet och programmet LabVIEW..

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

The purpose of this thesis is to gain understanding of how companies proactively can manage their reputation. The thesis analyzes three multinational companies in Sweden and uses two theoretical approaches - the reputation risk view and the reputation strengthening view - to gain an overall perspective of how companies work with their reputation. It focuses on investigating which key areas of reputation risk the focal companies identify and how they manage the reputation risks within these areas. Moreover, it examines which stakeholders the companies believe are most critical from a reputation point of view and in what ways the companies work with strengthening their reputation among those stakeholders. In order to find a general approach, the thesis investigates the similarities and differences that exist between the respective companies in the study.