The purpose of this report is to study the risk of dust explosions at the candy manufacturing plant Leaf Sverige in Gävle, Sweden. The risk analysis was conducted with a preliminary hazard analysis, PHA and event trees. The analysis focuses only on the risk posed to employees and material damages at the plant. No third person injuries have been considered. Another purpose of this report is to study risk awareness and risk communication concerning dust explosions.

By using modern methods of casting concrete, cast in place can get more effective and industrialized. A modern method is self compacting concrete. By using this type of concrete, advantages like improved working environment and rationalized construction can be reached. Because the concrete doesn?t need to be vibrated, the amount of staff on site and the noise can be reduced.

3D, 3D-projektering, IFC, Revit, Navisworks, Cad-Q.

This report is about planning a demolition. The purpose of this report is that it should become a base for a demolition of house J at the Academic hospital in Uppsala, and also to make general help for planning a demolition. This report also contains a part about how a change in the work environment affects general people. The work started with studies of literature and design of the general part of the report and then continued with a practical study of house J. From the experience of the first two parts of the report a general help for planning a demolition was shaped.

Arbetet har utförts på ABB i Ludvika med avsikt att förbättra revisionsprocessenför kontroll och skydd. En revision är en ändring på ett godkänt och klarmarkeratobjekt. Då objektet i fråga redan kan vara levererat till kund och man behöver göraen ändring krävs en strukturerad process för att utföra denna ändring. Processen föratt göra detta är i dagsläget komplicerad och kräver en hel del administrativt arbete.Processen använder sig utav ett antal program för lagring och databaser så som,Lotus Notes, HiDraw Studio, och HiDra32.Avdelningen för kontroll och skydd är i fasen att övergå till ett annat elCADsystem, Engineering Base. Detta är också en av anledningarna att man önskar en nyprocess för revisionshantering.Arbetet bestod till en början av inlärning av den dåvarande processen.

Projektets syfte var att undersöka om en handdator kan stödja distriktssköterskans arbete. I rapporten beskrivs hur vi tillsammans med distriktssköterskor har iakttagit i vilka situationer handdatorn kan vara ett hjälpmedel. Om patientjournalen är tillgänglig via handdatorn vid hembesök skulle det styrka de av oss utvalda nyckelorden som representerar distriktssköterskans yrkeskunnande; "seende", lyhördhet, kommunikation, flexibilitet, prioritering, beslutsfattande, dokumentation, framförhållning samt utveckla ett minne och självständighet. I rapporten skriver vi också om hur distriktssköterskorna tillsammans med oss har påverkat utvecklingen av det grafiska gränssnittet i designprocessen. Vi visar med mock-upbilder hur denna process har framskridit och vi pekar på hur viktig användarmedverkan är.

The general contract law principle of loyalty between negotiators, in deliberation, leads to a duty of disclosure for negotiators. The extent of this duty of disclosure is influenced by many different factors; amongst others the type of agreement, the negotiators knowledge and opportunity of procuring knowledge. The general duty of disclosure is both a part of the contract law principle of loyalty between negotiators in negotiating a contract, and an indirectly statutory obligation, that, if neglected will lead to nullification of the agreement. The legislator has stated that the general contract law, Lag (1915:218) om avtal och andra rättshandlingar på förmögenhetsrättens område (avtalslagen), should be used to regulate negotiating of contracts, including the negotiation of contracts of employment. In arbetsdomstolens judging, additional factors have been weighed in, and the judgement is done also through the use of a concept taken from employment law, the concept of ?saklig grund för uppsägning?.

The aim of this report is to investigate, on the basis of two consult agencies perspectives, what the possibilities and obstacles are to integrate the work with antagonistic and accident related risks. The report is based on two consult agencies where each agency´s work procedure is represented by a risk management method. The work with accident related and antagonistic risks is analysed and evaluated compared to four different components. The components are risk management process (IEC´s and FEMA´s model), driving forces, education and competence, and resources to control risk management with COSO?´s ERM framework.

Examensarbetets frågeställning berör användarnas medverkan i Requirements Engineering (RE). Under RE-fasen skall samtliga krav på det kommande systemet tas fram från intressenterna. En viktig intressentgrupp i kravutvinningsarbetet är de kommande användarna av systemet. Resultatet av RE-fasen är en viktig faktor som påverkar hela den fortsatta utvecklingsprocessen samt hur lyckat det slutliga systemet blir.Detta examensarbete innebär en undersökning av vad användarrepresentanterna anser om use case-modelleringen i RE-processen. Undersökningen har påvisat att användarrepresentanterna är positiva till use case-modellering som arbetsmetod för att kartlägga kraven.

This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

Failed system development projects are a common sight within the IT-industry. During the last ten years we have seen several more or less disastrous high profile projects being reported in the news. One aspect that might hold some of the responsibility for these failures is the fact that more organisations are knowledge intensive which makes their work processes difficult to capture in computer systems. How requirements engineering is handled becomes even more important in these cases, where processes are unpredictable and rely on individual judgement and knowledge. In this study we have examined the challenges of developing systems for knowledge intensive businesses through a method of qualitative case study of a university laboratory.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

Syftet med detta examensarbete är att utifrån ett lönsamhetsperspektiv analysera konceptet ModernaHus och hur det ska möta marknadskraven för flerbostadshus på den svenska marknaden..

The computer consultant company Create in Lund AB wishes to facilitate their invoice routines, as it at present is required that the administration finds and compares information from two different systems.The purpose of this thesis is to develop an invoice management system that simplifies the invoice management process for the administration at Create. During the development of the system, I have chosen to follow the software development process Unified Process and also tried to find design patterns that can be applied to the integration.The result of my project is a self-contained application developed using the Java programming language that communicates with the databases of the other two systems and presents relevant information to the user as a set of invoices. Of the 23 design patterns I studied, I used four of them in the invoice management system. However I couldn?t find any connection between any design pattern and the integration of systems.