AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

AbstractA continuous improvement of products and production is an important goal for a modern industrial company. A small engineering group located in Sweden came in touch with the authors of this report during the spring semester of 2014. The aim of this report is, as part of the group´s ambition of improvement, to analyse ways in which the quality of component casted parts can be verified. Non-destructive testing (NDT), and methods to use it for quality control, is the main focus of this report. However, fields such as material standards, component casting and quality engineering are analysed as well.

Företaget Radius Control Systems AB sysslar huvudsakligen med utveckling och underhåll av SCADA applikationer. Radius hade önskemål om att kunna visa väderinformation från en väderstation i Radius egna övervakningssystem Uni-View. Detta skulle ske via ABB: s styrsystem AC 800M/ 800xA, med en PM856 processor. Arbetet handlar om att upprätta kommunikation mellan en PLC och väderstation, och från PLC vidare upp till Uni-View. Rapporten behandlar hela arbetsprocessen med början från en prototyp till ett fungerande system.

The BSC is widely used mangement tool that is turning the vision and strategy into operational goals. However, after analyzing the criticism received the BSC, it seems af its internal focus, rigidity, static-ism and mechanical mindset limits the company's ability to create a strategy that takes important external factros into account..

The Master of Science in Energy Systems Engineering program at Uppsala University started in 2000 and 221 students has graduated since. This master thesis aims to answer what competencies alumni considers most important for successful professional practice. It also seeks to find out how these competencies are reflected in the program to identify potential gaps between importance and how the competencies are being prepared. With inspiration from similar research a method has been developed consisting of two steps: (1) A survey and (2) interviews with alumni. The alumni survey rates the professional importance of 13 competencies and how well the corresponding competency is prepared in the program.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

A new type of forest tree seedling, called mini seedling, has been developed by the University of Dalarna in Garpenberg, Sweden. Compared to traditional containerized seedlings that are grown for 1 ? 2 years, mini seedlings are grown for only 10 weeks. The mini seedlings are small, easily planted, cost effective, and reduce the amount of chemicals used in the nursery. Research has shown that mini seedlings tend to have higher overall survival rates than traditional container seedlings.

Denna uppsats avser att belysa frågan varför prototyper är ett viktigt verktyg i en utvecklingsprocess av ett mobilt system. Fördelar och nackdelar som verktyget kan innebära behandlas och olika tillvägagångssätt beskrivs. Arbetet med detta baseras i ett praktiskt utvecklingsprojekt på IT-kunsultföretaget Citerus. Projektuppgiften var där att genom en informationflödesanalys definiera olika flaskhalsar i informationsflödet på olika hotell för att sedan föreslå ett effektiviserande system. Projektet koncentrerades vidare på städpersonalen och deras arbete. Utifrån fortsatta studier föreslogs ett mobilt system som ger städpersonalen information för att lättare och effektivare göra sitt jobb. I flera olika forskningsdiscipliner som berör design och systemutveckling förespråkas ett utvecklingssätt med hjälp av prototyper.

This thesis includes a mechanical engineering design work performed incollaboration between ÅF and Halmstad University. The work is done by FredyOlsson?s methods of Principle- and Primary Construction and David Ullman?stheories of Design for Assembly.The group was commissioned by ÅF to produce a concept to narrow down theassembly time of today?s luggage doors by reducing the numbers of adjustmentoptions. They also wanted it to be easier to mount the assembly by making itpossible to adjust the door in a closed position. Today luggage door takes, with its10 adjustment possibilities, around 4 hours each to assemble and ÅF wanted anassembly time around 10 minutes per door.Initially a preliminary study was made where the group began reviewing today'sconstruction and mounting of rails and doors on buses.

The point of interest in this study is to identify whether ethnicity is a correlating factor regarding Hungarian immigrants? development of identity in Sweden. The general aim is to increase knowledge and understanding of the conditions for the Hungarian ethnical group in Sweden to reach self-realization. The main question is whether the general view of the background of this ethnical group has a connection to their self-realization in Sweden? Since the study involves a whole group of minority, a limitation has been made to adults living in the city of Halmstad, Sweden.

Detta arbete är en magisteruppsats i Systemvetenskap med inriktning data och systemvetenskap, 10 poäng, vid Luleå Tekniska Universitet. Uppsatsen klargör vilka faktorer som avgör en användning eller icke-användning av Case-teknologin. Case-teknologin möjliggör ett ingenjörsmässigt närmande till mjukvaruproduktion och systemutveckling genom att tillföra nödvändig systematik, standardisering, automation och kvalitetssäkring. Ett stort antal undersökningar är gjorda genom årens lopp med syfte att förstå och förklara varför det som teoretiskt borde vara lösningen på problemet med undermåliga system inte tycks ha blivit detta. Resultatet av undersökningen tyder på att de variabler som Prekumar och Potter kom fram till i sin forskningsmodell ? relativa fördelar, kostnad, komplexitet, kompabilitet, produkt förespråkare, stöd från ledningen och operativ expertkunskap har störst påverkan på användningsbenägenheten av Case-teknologi..

The purpose of this master thesis is to construct a steering transmission, for a trackedvehicle, containing two hydraulic circuits which are connected. The steeringtransmission should be mechanical to avoid steer-by-wire.BAE Systems Hägglunds has in an earlier study examined a system with two hydraulicpumps and one hydraulic motor, but the safety of the system wasn?t sufficient.To achieve sufficient redundancy there must be two hydraulic motors, which arecontrolled separately. When the two systems are connected in one point, this point is acritical part of the system because it directly affects both circuits. If one of the hydrauliccircuits fails the other should be able to operate independently as a steeringtransmission.

The purpose with this report is to illuminate the construction solutions and the deformations that could exist in medieval parish stone churches. But also to increase the writers understanding how activity forces effect the construction of the churches. With help from literature and a practical study, containing three churches the writers have collected the material that the conclusions and discussions are built upon in this report. The construction of the churches consists of three parts, the wall, the roof and the vault. The construction solutions are similar in the churches disregard of the roof, where the roof trusses are different.

This report is a part of the process of enhanced cooperation between fire rescue services in the region of North West Scania. The aim of the report is to study and analyze how the fire rescue service should be structured, in terms of rescue units and personnel, if no account is to be taking to the current organization. Two types of accident are considered in the report, traffic accidents and building fires. These are more affected by decreased response time than other accidents. Several suggested organizations are presented and they are evaluated with the computer program REP.

The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.