An evaluation: how have the goals of ?Vårdkedjeprojektet? been implemented at the treatment centre of RällsögårdenThis evaluation was commissioned on behalf of the treatment centre of Rällsögården. The aim of this study is to evaluate how the goals of ?Vårdkedjeprojektet? (VKP) have been implemented in the institutional care at the treatment centre of Rällsögården. This study was focused on the following questions: a) how is the function ?internal coordinator? experienced by staff at Rällsögården, b) in the function of internal coordinator what aspects are thought of as effective/non-effective concerning the cooperation with ?external coordinators? and contact with clients and staff, c) how is Vårdkedjeprojektet and its treatment approach ?Community Reinforcement Approach? (CRA) experienced by coordinators, clients and staff and d) how well is the aftercare functioning for clients who have finished their treatment at Rällsögården, and still participate in VKP?The choice of research method was triangulation; a combination of qualitative and quantitative methods.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Background: The demand for sending letters, in the traditional aspect, has decreased because of electronic sources which have replaced a big part of letter communication. The Postal Service constantly strives for lowering costs and due to the changeable demand, a greater awareness is required regarding recourses and their usage. The previously mentioned measures in combination with commonly occurring quality issues during the collective process at the letter terminal in Alvesta would be improved by applying a lean-perspective to the process. A first step towards saving of time is to apply the ?value stream mapping?-method on the collective process for small and large letters.Purpose: To map the process of collection for small and large letters to be able to identify waste of recourses and furthermore give suggestions on how the Postal Service would be able to reduce the waste of recourses identified.

Abstract My purpose of doing this study is to investigate the culture of delivering education in a strange combination of subjects labelled ?Language choice Swedish/English?. The activity however exists without curriculum, syllabus or certification. I want to put study the problem of delivering an educational activity without national certification. I will use a hermeneutic approach and render properly the headmaster?s, the teachers? and the students? views on the activity in one school.

This reports purpose is to give a general view on how to handle information collectedthrough photogrammetry and laser scanning with the help of UAS. The report ismade in collaboration with WSP Group and will briefly describe howphotogrammetry and laser scanning, also known as Lidar, works and how those areused in the construction business today. Then the focus will be on how gathered datais handled today, how outsourcing of data should be approached and if there are anyconsequences if data is handled in the wrong way. Interviews have been made with allparts in the UAS business. That includes authorities as Transporstyrelsen,Försvarsmakten.

A multivariate cross-sectional model is used in this thesis to proxy for expected earnings and to estimate return on equity for 214 companies over the period 2009-2013, using Swedish data. The model, which has never been tested on Swedish data before, is first confirmed to function as a forecasting model for expected return. Furthermore, the model is evaluated through a comparison with two univariate models based on the assumption that return on equity follows a mean reversion process. Forecast accuracy is calculated as the difference of estimated returns and actual returns. The results show that the univariate models' forecasts are superior to the multivariate model's..

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This thesis investigated if a combination of increased under colour removal (decreasing the total ink limit), normal andincreased density and modern FM-screening could be used to provide a visually better print on uncoated and coated paperin comparison with AM-screening using the same conditions.Two different test groups (one with graphic background, the other with no graphic background) were asked to a visuallyassess the quality of the prints presented in a pair comparison using a reference image.The results show that the FM-screening did not obtain any significant visual difference in comparison with AM-screening,regardless of paper types and density levels. In general however, prints on coated paper were graded higher..

This report covers the thesis done by mechanical engineering at the engineering program at the University of Halmstad. Student Work Development of packaging in the food industry includes 15 credits and has performed over 20 weeks in spring 2009. The thesis work is a compulsory part of education and aimed at the student must apply the knowledge it has given during training in a project related to reality. Student work has been carried out in cooperation with Hanson & Möhringen AB and the project's main objective was to develop an environmentally friendly packaging to their brand Falk Salt. When salt is one of the world's cheapest commodity was packing all the costs have to be as low as possible.

This study has been carried out in cooperation with Unilever and partly with the EC founded project, Smartdoc IST-2000-28137. In areas of statistics and image processing, both the amount of data and the dimensions are increasing rapidly and an interactive visualization tool that lets the user perform real-time analysis can save valuable time. Real-time cropping and drill-down considerably facilitate the analysis process and yield more accurate decisions. In the Smartdoc project, there has been a request for a component used for smart filtering in multidimensional data sets. As the Smartdoc project aims to develop smart, interactive components to be used on low-end systems, the implementation of the self-organizing map algorithm proposes which dimensions to visualize.

The purpose of this Masters thesis is to investigate if gender stereotypes are mediated to children between 0-3 years through books suitable for their age. This thesis concerns books that are available in public libraries. The content will be analysed by using a combination of methods, both content analysis of all the books in our study and a qualitative analysis of a smaller number of these books. With inspiration from both Robert Connell and Yvonne Hirdman and their theories of gender and gender stereotypes, this material was read and we wanted to examine if books for very young children might establish stereotypes. Our analysis showed that many known stereotypes are common in these books.

The metaphor has been among us since a very long time, but despite over 1.000 years of reflection it is still uncertain how one should understand the concept. There are few, if any, doubts how to understand the definition of metaphor, but is it possible to find a real distinction between the metaphorical and the non-metaphorical? In this essay I seek an answer to when a metaphor is a metaphor or when it is instead a generally accepted concept of how something actually is. I will use previous research on the topic from Aristotle, Friedrich Nietzsche, Paul Ricoeur and George Lakoff and Mark Johnson. These persons have given me a wide perspective and approach to the metaphor ? and when a word should be considered as a metaphor or not.

A helicopter based system equipped with a millimetre-wave fire control radar is studied for improvement of the detection probability for moving ground targets. The system is a pulse doppler radar that sends out the electromagnetic wave in repetitive pulses. The frequency in which radar sends this pulse is called Pulse Repetition Frequency (PRF). The velocity of the moving targets is measured by spectral analysis of the pulses received. With this sort of system some targets will not be possible to detect.

The report addresses four main tasks, situation analysis of the company's total costs and transportation volume, cost analysis associated with the adjustment of the filling ratio, transport costs for the expansion and new expenses on a combination of expansion with new adjusted filling ratio.  Increasing transport costs for the company was the main reason for the request of the current situation analysis. A survey of the total cost with the actual volumes and transport provider pricing is the basis of the analysis that extends from May 2006 to October 2008. The results show an increase in costs, both overall expense and per cubic meter of transported goods. Volume spreads, trends, and seasonal variations are according to our and the company?s expectations.

Bakgrund: Många av patienterna på en neurointensivvårdsavdelning (NIVA) vårdas med respirator under en längre eller kortare period av vårdtiden. Neurointensivvårdspatienterna bedöms ibland utifrån de kriterier för urträning och extubering som används på allmänna intensivvårdspatienter. Detta kan leda till för tidig extubation med reintubation som följd. Syfte: Redogöra för vilka kriterier som ska bedömas hos neurointensivvårdspatienter inför en extubering. Metod: Litteraturstudie.