In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

In this study I have compared two systems of handling TMR, self-propelled/ self loading mixers and conventional towed mixers, what has been investigated is the time for filling, mixing and feeding TMR as well as maintenance and fuel consumption. The background of this study is the structural rationalization within the Swedish milk production that has put focus on efficiency and reducing of costs. Forage and labour are the two biggest costs in milk production today. The study has been performed by visiting three farms and with a stopwatch measured the times for filling, mixing and feeding TMR. At the time for the visits, the users have been interviewed regarding maintenance and fuel consumption. They have also had an opportunity to give comments of how they experience the mixers. The result of the study after processing is that the average stock in the study can save 74000 SEK a year by reducing time for filling, mixing and feeding TMR to cows with a self propelled/ self loading mixer . The conclusion I can make of this study is that it?s not the size of the stock that decides whether it?s interesting to invest in a self propelled/ self loading mixer, but the presumptions on the farms, for instance forage logistics and mechanical equipment..

Poorly maintained forges are a common sight in the province of Gästrikland. Because of their changed appearance, possible move from the origin location and poor items related knowledge they will rarely qualify for the range of funds available through Länsstyrelsen. Therefore this study deals with the problems associated with the forges in southern Gästrikland, i.e. Hedesunda and Österfärnebo parishes.The aim of the study is to increase the items related knowledge of forges and perhaps form the basis for restoration projects in the area. Eleven forges have been examined and the changes they have undergone have been highlighted.A forge was erected on the farm and was used for the households needs such as producing and repairing tools.

The purpose of the thesis Masculinities ? Gender and its Impact on the Social conditions of individuals is to perform a critical study of how gendered norms influence the social conditions of individuals. This has been done by a problematization and the attempt to answer the question of how the hegemonical masculinity can be analyzed as a discourse, and how the structural aspects of this discourse inflict on the social conditions of masculinities.The question was divided into the analytical themes: the boarders of the discourse, the institutionalization of the discourse, the actuation of the discourse and the agents of the discourse. The theoretical frame is constituted by the theory of discourse by Michel Foucault, the theory of the hegemonical masculinity by R.W. Connell and a subversive identity theory by Judith Butler.

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

Laminitis is a debilitating disease causing much suffering to horses and ponies all over the world. It is manifested in the hooves as a mechanical failure of the suspensory apparatus between the hoof capsule and the distal phalanx. Due to the weight of the horse the disease may result in a dislocation of third phalanx. Six healthy standardbred trotters were used in this study on whether standardbreds tolerate forced recumbency as well as Shetland ponies. Recumbency was induced pharmacologically but maintained only by lowering the ceiling height of the box to a height of approximately 125 ? 140 % of the horse´s thoracic height.

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt.Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket.

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.