Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.

The way society categorize different people into groups is problematic in the sense that the categorization can seem stigmatizing and have social consequences for those being categorized. Immigrants are one of those problematic categories.The following essay studies this categorization of ?immigrants? based on a governmental investigation of structural discrimination that took place in 2002-2008. The aim is to study the use of the category ?immigrant? and the consequences that follows such a categorization.

Examensarbetet Framtidens skolbänk som har utförts på avdelningen för maskinteknik vid Blekinge Tekniska högskola i samarbete med grundskolan Vittra Adolfsberg. Skolbänken är till för att möjliggöra ergonomiskt bra arbetsställningar i både sittande och stående position för alla elever oavsett längd och storlek. Dessutom ska skolbänken underlätta användandet av digitala undervisningsredskap såsom datorer och surfplattor. Examensarbetet består i att utveckla och konstruera en skolbänk som möjliggör detta utan att skolbänken blir för dyr eller för ömtålig för att kunna vara att reellt alternativ för alla skolor. Idag så är projektet på konceptstadiet men det finns definitivt möjligheter att någon variant på mitt förslag skulle kunna kommersialiseras då det i dagsläget inte finns några liknande produkter på marknaden..

The purpose of this paper is to examine whether, and if so, how tourism effect the construction of a new city district with a stadium in focus. The study is based on a case study of Swedbank Arena and Arenastaden as nearby area. There has been an interest from the writers to study Swedbank Arena and Arenastaden, as it is a current subject, and both of them are under construction, which means that it was possible to see how the process works from the ground up. It has been shown that Swedbank Arena is built up in an entirely new district in which there will be new infrastructure that is tailored to the stadium and the crowd it?s expected to attract.

The product "urinal funnel" for women has fascinated me for a long time. Not only because it solves a practical problem in a simple way, but also because it challenges our definitions of gender and behaviour. This report describes the process of making a new design for a funnel, taking material, ergonomics and construction in consideration. It also includes structuring a launching of the product in Sweden. It starts up with a large amount of information gathering, both by interviewing testgroup-perticipants, but also by researching and evaluating the range of existing funnels.

The aim of this study was to shed light on how journalists describe the child?s world and what gender labels are used in their descriptions. We wanted to get a better understanding of what happens when gender is constructed.In order to study how gender is constructed, we chose to examine how the children?s magazine Kamratposten describes children?s spare time. We chose Kamratposten because it turns to both girls and boys.

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

Syftet med examensarbetet är att ta fram förbättringsförslag som höjer leveranssäkerheten för transmissioner och axlar vid Volvo Construction Equipment Components (CMP) i Eskilstuna. För att möjliggöra detta har en tydlig bild över företagets situation idag skapats. Enligt kunderna anser CMP vara en av de sämsta leverantörerna, vilket verifierades när den genomsnittliga leveranssäkerheten uppmättes till 30% i den utförda undersökningen. Den dåliga leveranssäkerheten är till stor del egengenererad och skapas genom en ond cirkel av länkade problemområden. Den onda cirkeln börjar med dålig leveranssäkerhet vilket medför svängningar i produktionen som förstärks genom sättet att planera och anskaffa material.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

During the past years Building Information Modelling (BIM), which is a digital way to work, has begun to spread amongst the parts of the construction process. At the construction phase the larger companies has started using the new way to work. This expansion has not been developed amongst smaller companies leading to the purpose of this report, to investigate in which ways the smaller companies can implement BIM by changing their way to work. The thesis is delimited to work preperations with the objective to define how the work preperations should be structured to enable the implementation of BIM. To achieve the objective of the report, information about the subject has been collected by interviews and literature studies.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.