My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

AbstractMy purpose with this study was to learn more about different ways to teach children how to read and to investigate how teachers can use more fiction when they teach.During the years that I have been working in school, I have only met teachers who use a method that is built on sounds. The children learns to read from books where the words is not put in their right purpose; for example; we can se a sun, a dear looks down in a lake.After my teacher-education in literature I became more and more interested in if it could be possible to use more fiction when you teach children how to read. I also wondered if it was possible to find readers where the sentences are put in a meaningful story.I heard of a method called Whole Language, or the kiwi-method and I decided to find out more about that method. I decided to make a comparison between the ?sound-method? and the Whole Language-method.I have been using qualitative interviews with both children and teachers with experience from these different ways of teaching.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

AbstractPurpose: The purpose of this study was to see if there was any correlation between BMI and chronic pain among participants who underwent a behavioural medicine rehabilitation program at a pain clinic in the central part of Sweden. Method: The study was conducted as a quantitative descriptive study context and has used medical records with documented data from the participants who were part of a pain clinic rehabilitation programs in the years 2004-2005. Altogether there were 76 participants in these years and excluded was nine participants with BMI measurements were not included in the documentation. Main Results: Regarding the relationship between BMI and chronic pain there was no significant relationships. Participants who completed the behavioural medicine rehabilitation program, however, showed a lower value of BMI and the estimated pain in VAS from the first to the third which is the last time of measuring.

The construction industries are relatively conservative type of business that takes a longtime to adjust for new methods and embrace new ideas. It dose not matter if the newmethod seems to be an improved method as long as it is new and untried. Constructioncompanies are reluctant to change form a longtime working method to a relativelyunknown method.The purpose with our report is to perform an evaluation of BeWi construction method.Our goal are to present the generally opinion about BeWi from the contractors that hasbeen in contact/worked with the method. We also want to know from the contractor?spoint of view if BeWi and the method measure up to the standards that are presented byBeWi and if they believe that improvements need to be done.Our progress up to the final report has consisted of three parts[1]Field studies[2]Interviews[3]Literary studiesWe started out with field studies where we took notes and observed all the includedworking phases on the construction site when using the BeWi method.

AbstractPurpose: The purpose of this study was to see if there was any correlation between BMI and chronic pain among participants who underwent a behavioural medicine rehabilitation program at a pain clinic in the central part of Sweden. Method: The study was conducted as a quantitative descriptive study context and has used medical records with documented data from the participants who were part of a pain clinic rehabilitation programs in the years 2004-2005. Altogether there were 76 participants in these years and excluded was nine participants with BMI measurements were not included in the documentation. Main Results: Regarding the relationship between BMI and chronic pain there was no significant relationships. Participants who completed the behavioural medicine rehabilitation program, however, showed a lower value of BMI and the estimated pain in VAS from the first to the third which is the last time of measuring.

We set out to compare two different categories of workers: the, so called, white- and blue collar workers. The studies aim was to measure if there were any observable differences between the two in means of optimism and sense of coherence. There are two tools created for measuring optimism and sense of coherence, the Life Orientation Test ? Revised (LOT-R) measures an individual?s level of optimism and Aaron Antonovsky devised a test for measuring an individual?s level of sense of coherence (SOC). Optimism is best explained like a way to measure anticipation, how an individual expect future events to fall out.

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible. The stationary resistance bridge had been examined through various kinds of measurements to be able to see how stable the system is and how to obtain a measure value as optimized as possible.

The purpose of this study is to investigate the teachers? described experiences of advantages as well as disadvantages of Arne Trageton?s write to read-method (?ASL?) in contrast to the code-oriented traditional way of teaching. The aim of this study is furthermore to depict the teachers? opinions on whether they experience that the ASL-method is unfavourable for students in general. This study will also investigate the teachers? standpoint regarding choice of reading and writing method.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.