This essay aims to investigate a rare method of marking up timber before hewing it. The method for marking up timber is by eyesight, where visual judgment and the use of a broad axe are the tools employed. The broad axe is driven through the bark and exposes the inner bark in a straight line. The method is described by a craftsperson dating back to the 1930s. There is a lack of information regarding the method.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

The aim of this study was to examine how the activities of two preschools develop the language in matter of the teacher?s work of procedure. The following research questions were essential for the survey and therefore formed the basis of the examination:How do the teachers in both preschools work in a language evolving way?What significance does the environment have for the language development?Are there similarities and differences between the preschools in their language development approach?The study is based on a qualitative method, where the teachers of both preschools were interviewed with the purpose of obtaining information. The teacher?s statements and interviews were analyzed in relation to previous research, where the theories of different writers form the base of the theoretical connection to the study.The teachers view in developing the language regarding to their aspirations in measuring the language an important position in their operation, can be portraied as the conclusions of this study.

This master theses deals with different methods for automatic tuning of the existing controller for external axis. Three methods for automatic tuning have been investigated. Two of these are based on the manuell method used today. The third method is based on optimal placement of the dominant poles. Different sensitivity functions are important for this method.

In this project I have created a design for the delivery rooms of Swedish hospitals with the psychological aspects ofbirthgiving in focus. This is something that I think the delivery rooms lack and so far it has been the midwifes job to,without any tools, give the women in labor the mental support and encouragement they need.My goal was to give the midwifes a tool to work with when it comes to encouragement, something helping themhelping the woman to feel safe and relaxed, strengthened, informed and in control of the situation.I choose to focus on the difficulties measuring the physical work the woman in labour had done and what was leftof the labour. I wanted to visualize the process of the birth, allowing the woman to see and being able to focus onwhere during the labour she is, how far she has left and also being strengthened by the amount of work already managed.Further I wanted to make the woman feel invited to take control over the birth and the room in which she isin labour. I wanted her to be able ? if she wanted ? to make her own settings of the mood in the room, deciding forherself if she wanted a more relaxed environment or perhaps a more energetic.

Sustainable Development is often described as a balance between ecological, economical and social aspects. Between these exists a complicated interaction that creates conflicts in the planning of the landscape. We see a growing need for a functional interaction between values and interest and an understanding for different perspectives. Cooperation and dialogue are key ideas with the focus on cooperation rather than the goal. There is a lack of forum for dialogue and cooperation within municipalities where a great knowledge and competence are gathered.

In the following study the author compares two methods of teaching history, the thematic approach and a more traditional chronological approach. Aiming at distinguishing the perceived notions of strength and weaknesses of each method, from the perspective of teaching, the author uses semi-structural interviews with four teachers in order to shed light on the reasons why each method is chosen. The perceptions of the thematical and chronological method in teaching history are further compared with the result in students? grades. The result shows that the thematic method is perceived as being better at teaching the student about causality and different understandings of changes in history, which would have positive impact on higher grades.

A large part of the interactions between horse and rider during horseback riding takes place through the reins and the bit and devices for measuring the tension on the reins, rein tension meters, has fairly recently been developed. To safeguard the welfare of the ridden horse riders need to be aware of the rein tension they apply and actively work to decrease it. Furthermore, there is a need to develop the study of rein tension through new techniques and refined analysis procedures. A good-quality rein tension meter should be small in size, sensitive, durable and as accurate for light rein tension as for strong forces. Rein tension meters used in research on horse and rider interaction commonly depend on strain gauge technique for generating rein tension data.

The aim of this final thesis is to make it easier for the customer of a new designed house to get a picture of what the house will look like inside before it has been built.A method, which can be applied by any construction company who likes to visualize there buildings, has been designed and tested. One works after a regular design planning which is transformed into a three dimensional model of the house. In a rendering program, materials and surfaces are chosen for the model and then a picture of the finished product is made. The programs used for this work are ADT 2006 and VIZ Render.To evaluate the use of this method I?ve chosen to cooperate with LB-Hus which is a housing company that is specialized in building detached houses.

A district heating plant has the advantage that it can take advantage of the waste heat from industries and use of cheap fuels to produce heat. But for the long term is competitive requires that energy is also saved in district heating plants. One way to save energy in a district heating system is to increasing cooling to the return temperature. This leads to less power needed to drive the distribution pumps,  and that more energy could be extracted from the same amount of fuel by an improved flue gas condensation.In Karlskoga the return temperature into the district heating plant is high. They would therefore reduce the return temperature in order to extract more energy from the flue gases.

Metoder används idag i princip vid all utveckling av informationssystem. Undersökningar som gjorts visar dock att de sällan följs på det sätt skaparna av metoderna avsåg utan att systemutvecklare av olika orsaker modifierar eller skräddarsyr dessa metoder och därigenom skapar en Method- in-Action. Syftet med denna uppsats har varit att genom kvalitativa intervjuer undersöka systemutvecklarens metodanvändning samt studera vilka faktorer som påverkar när systemutvecklaren skapar en Method-in-Action. Några av de slutsatser vi dragit av denna undersökning är att nyttan tid, storlek, vana, visualisering och trend är faktorer som påverkar sammansättningen av en Method-in-Action och att systemutvecklare oftast använder en eller högst två metoder i sitt arbete..

This thesis examines information visualization, infographics, as a method of advertising. To answer the initial research question of what makes infographics an appropriate method for print advertising, a practical infographic-based advertising campaign has been designed. This, together with three other campaigns, has been the basis for an analysis focused on function, appeal and persuasion. The result tells us that there are benefits to using infographics for an advertising purpose, because the method can act both attention-grabbing and convincing, depending on how it is used and designed..

This study examines some students? attitudes towards mathematics in grade 2-4. When studying students? attitudes questionnaires and interviews are often being used as methods. In this study we used a more rare method.

The purpose of this study is to develop a general understanding of the areas of alliances and service quality as well as their relation to each other, through a consumer perception. Further, to discover more detailed and close up knowledge of customer perceived service quality within airline alliances. This is done by identifying particularly significant dimensions in the service process that have an influence on the perceived service quality.The thesis is based on qualitative study using a critical incident technique to explore the issue of service quality. In the research of the material the iterative approach has been used. The primary information sources are the interviews with customers-members of airline alliance.