This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.

The purpose of this thesis is through a case study and a survey; to examine the most appropriate communication channels between a sender and a receiver. It also aims to make this relationship more effective.The following questions are to be answered:1. Which communication channels ought to be used to optimize the message from Skara Näringslivsoffensiv to its target group?2. Which communication channels is Skara Näringslivsoffensiv planning to use?3.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

The purpose of this thesis is to investigate the plaintiffs and the defendant?s prospects to change their claims and pleas in optional civil actions and how the rules for the modifications of a suit are affecting the framework of the process. The plaintiff's general ability to expand and alter the claim is found in the chapter 13, 3 § of the Act of Procedure and the basic principle is that a claim is not to be changed. From this basic principle exceptions are allowed to claim another fulfillment or to expand the process with a claim for interest or other additional obligations. The plaintiff can also limit his or her claim or expand the claim with new legal foundations as long as the issue of the process does not change.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

Title: Crisis communication strategy and brand ? A case study of Swedish Red Crossthrough dialog analysisAuthor: Anneli SaarelaPresented: 01.06.2010Purpose: The study addresses the subjects of crisis communication and organisational brand, in relation to stakeholders and brand reputation. The purpose of this essay is to study the dialog regarding the crisis of remunerations with the Swedish Red Cross and how the organisation responds to the criticism. An identification and analysis of the discourse regarding the brand are also included in the study. Part of the empirical material will also be used in relation to Situational Crisis Communication Theory (SCCT).

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

Completed durability testing of gearshift gaiters at Kongsberg Automotive in Mullsjö, is sometimes leading to discussions regarding whether or not a gaiter is supposed to be a pass or a fail. That is because the current pass/fail-criterion are a bit vague. A durability test takes around 4-5 weeks to complete which is a long time if the tested material does not pass the test and a new material has to be tested instead. Stricter pass/fail-criterions and a faster testing method for the materials are therefore desired.In order to develop a durable pass/fail criteria, seven already judged gaiters were chosen. Every one of the gaiters was put through detailed analysis, after which there were a new assessment of the gaiters.

Over the past few years the Swedish forestry industry has become increasing interested in direct seeding. Although, in practice, this interest has been restricted to pine seed, the knowledge and techniques that have been developed for pine seeding can readily be transferred to spruce. Direct seeding is a method that is of interest to the forestry industry since it can lead to lower regeneration costs, denser stands and better root development than the more conventional planting method. This study evaluated experiments that focused on direct seeding of spruce in the northern Sweden. Skogforsk set-up the experiments in Gideå and Sävar in 2003.

The reason I am writing this essay is due to my curiosity on how children are interested in and how their understanding in geometry is at preschool years.My interest lies in children and arithmetic and especially geometry, which is something I belive that children deal with a great deal in their everyday routines, both in school and at home.What do children do when they work with geometry, and are they aware of what they do? To figure this out, I have taken my findings from three different interviews that I have done atmy preschool with a group of children that have been preselected.I am also curious about whether there is a difference in different types of schools. In this essay I have compared the preschool I work with a Montessori school and a third type of schoolwhere the children spends most of their day´s outdoors called ?Ur och Skur?In my results I can not see any major differences in these three preschools work with mathematics. The childrens knowledge is at a similar level and the work with geometry hasbeen implemented in a similar way..

This paper aims to derive the Black-Scholes equation for readers without advanced knowledge in finance and mathematics. To succeed, this paper contains a theoretical chapter in which concepts such as options, interest rate, differential equations and stochastic variable are explained. This paper also presents the theory of stochastic processes such as the Wiener process and Ito process. In the chapter on the Black-Scholes model the Ito process is used to describe price of shares and with the help of Ito's lemma Black-Scholes equation can be derived. In the paper, assumptions are listed that apply to the Black-Scholes model and then uses the Black-Scholes equation to calculate the price of a European call option.