This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.

The southern part of Sweden, Skåne, is frequently exposed to storms causing great damage to Norway spruce (Picea abies L. Karst.) stands. A storm during the winter 1999/2000 raised the attention of the problem. A lot of forest owners got large areas of spruce stands wind thrown during this storm. Can naturally regenerated birch (Betula sp.) be an alternative on these wind-exposed sites? This was the main question I was facing when discussilig the problems with Esben Möller Madsen, Söderåsens forest district. The aim of this master thesis was to present an economic analysis of Norway spruce versus birch.

Gymnastics is a reoccurring event in the physical education of many students. Despite this, there is still today limited research which describes the students? perspective and interest for this activity and if there are any differences between genders. The purpose of this study has therefore been to investigate students? interest for gymnastics and if there are any experiences, which can affect this interest.

The aim of this master?s thesis is to examine how managers in some public libraries are using performance measurements and to what extent decision making is based on the results. The main questions posed are:??What performance measurements and indicators are used in the libraries examined???What is the attitude towards performance measurements among library managers???How and to what extent are performance measurements and indicators used in the process of decision making???What improvement would library managers wish regarding the development of performance measurements in public libraries?The theory is based on a model of evaluation of the public sector in addition to general steps of evaluation of quality and performance measurement results. The investigation is based on qualitative interviews with seven managers of public libraries in Sweden.

A study was made to evaluate how current measurementscould help to determine how particles from fish farms are dispersed. During sixweeks of the summer 2012, two different current measurements were conducted.One of them consisted of measurements each fifth minute at 5 m and 15 m atthree locations for 14-16 days each. The other consisted of profilemeasurements at each location at four times during the period of six weeks. Forthe current measurements two instruments (model RCM 9) were used. A two weekmeasurement can give enough data to make an evaluation of how the currents at alocation will transport litter from a fish farm.

Purpose: The purpose of this study was to investigate if there was a difference in the tear film?s osmolarity before and after drinking coffee. 'Method: All subjects in this study were asked to fill in a questionnaire to diagnose factors in their subjective symptoms, the questionnaire TERTC-DEQ. The subjects with a total graduated points of over 17 were not allowed to participate in the further measurements. In the study there was a total amount of 38 subjects, were 5 participated twice for both measurements, coffee and water.

The purpose of this report is to evaluate different methods for identifying states in robot models. Both linear and non-linear filters exist among these methods and are compared to each other. Advantages, disadvantages and problems that can occur during tuning and running are presented. Additional measurements from accelerometers are added and their use with above mentioned methods for state estimation is evaluated. The evaluation of methods in this report is mainly based on simulations in Matlab, even though some experiments have been performed on laboratory equipment.The conclusion indicates that simple non-linear models with few states can be more accurately estimated with a Kalman filter than with an extended Kalman filter, as long as only linear measurements are used.

The determination of the optical properties of biological tissue is an important issue in laser medicine. The optical properties define the tissue´s absorption and scattering behaviour, and can be expressed by quantities such as the albedo, the optical thickness and the anisotropy coefficient. During this project, a measurement system for the determination of the optical properties was built up. The system consists of a double integrating sphere set-up to perform the necessary reflection and transmission measurements, and a computer algorithm to calculate the optical properties from the measured data. This algorithm is called Inverse Adding Doubling method, and is based on a one-dimensional transport model.

During the late twentieth century, political and societal changes gave rise to an increased interest in performance evaluation in public organizations. This development also affected libraries in the public sector. The main concern for this master thesis is performance measurement in libraries. In this study two different types of libraries are investigated, one public and the other academic. My aim is to find out if and how performance measurement appears in the libraries annual activity reports.

Micronic Laser Systems AB produces and develops machines for the photo mask production market. One of their products is the Omega machine which exposes photo masks using 5 laser beams simultaneously. It is important that the distance between the each laser beam, the x-separation, is the same. The x-separation is today measured by exposing a photo mask with a certain pattern and thereafter measured with a metrology system. This takes to much time and it is desired to find a faster method to measure the x-separation without loosing precision.The task for this master thesis is to improve an existing measurement method which uses a calibration mask.

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

The Energy Market Inspectorate is implementing a new tariff regulation in Sweden. A small part of the new regulation concerns effectible operation costs and originally they where intended to be calculated using a modification of equivalent comparison standards, in Swedish Ekm. This thesis is intended to analyze if Fortums grid in Stockholm could be described correctly, using equivalent comparison standards. In Ekm every part of the distribution grid is designated a weighting in relation to 1 km 0.4kV over head line. These Ekm-measurements are intended to simplify comparison between different grid areas with different structure and geographical conditions.

AimThe main aim of this study was to find out how teachers reflect on their work with developing pupils? interest towards mathematics in grade nine. As a teacher in mathematics, it is important to be aware of different views on interest towards mathematics and how it is possible to work in that direction. Since developing interest towards mathematics is written the in syllabus as criteria for teaching mathematics in grade nine, it is important to know and take an active role in finding ways to approach the issue.Main issues? How do teachers in grade nine reflect over their work with development of interest towards mathematics?? How are teachers? Beliefs Systems reflected in their work with interest?MethodThe main focus of this study was teachers? perspective on their own work on developing interest towards mathematics.