This Master of Science Thesis was a complement project to the PIEp study MENTOL, carried out at a Swedish midsize medical device company.. PIEp nationally works for a long-term increase of the innovation capability of people and organizations. The purpose of this study was to find measuring parameters of innovation that fit medium-sized technological companies and organizations, Another purpose was to evaluate an innovation investment at the company, consisting of external consultant?s education of key personnel in innovation, and a two day innovation seminar with all personnel at the company participating. The methods used during this Master of Science Thesis were: feasibility and literature studies about innovation and innovation Measurements, quantitative and qualitative interviews, surveys and workshops.For an accurate measure of innovation it is crucial to a have full understanding of what innovation is, and clarity of the purpose of the Measurement itself.

Protein is an important component in various milk products and has a crucial role in the final quality. Excluding non-protein nitrogen, bovine milk contains about 3.3% protein whereas about 80% of this fraction consists of casein. There are four major members in the casein family: ?s1-casein, ?s2- casein, ?-casein and ?-casein. Proteolytic enzymes are the cause of degradation of the economically important milk proteins.

This study has focused on obesity prevention efforts in schools in the United States of America. The study was conducted in two states, Oklahoma and New Hampshire. In New Hampshire, the study was focused on more minor efforts which were the "CSHP", HEAL, Early Sprout, FIT, AFHY, 5210, and Kids CATCH Club. In Oklahoma, the focus on the study was on the program It's All About Kids.Method: Unstructured interviews and observation, analysis from an national policy document. A total of seventeen interviews conducted, seven of them in New Hampshire and ten in Oklahoma.

The travel agencies exist on a market that is distinguished by increasing competition. A majority of the travel agencies offer different services that all satisfie the same customer need. However,one major difference in the market aspect is the service quality, this making it an important mean of competition. There are several acknowledged methods of Measurement when it comes to service quality and it is important to use an instrument that takes into consideration the fact that charter tours is a complex merger of several services. The purpose of this essay is to establish if the SERVQUAL method is a suitable instrument for measuring service quality in the travelindustry.

Magnetic resonance imaging (MRI) has the potential to be used for the diagnosis and study of osteoarthrosis in the equine tarsal region. In the development of new diagnostic MRI techniques cadaver specimens are often used. To allow the use of cadaver legs for these types of studies it is important to know the effect of time after death on the MRI image. Since the relaxation times are temperature dependent, it is interesting to examine whether the time after death and the temperature of the cadaver may play a role in the image appearance and quality. The radio pulse sequences that show the different types of tissues are also important to know when pathological evaluation with MRI is used.

AbstractBackgroundParkinson?s disease is a chronically not curable progressive disease that leads to different degrees of disability. Controlled studies on how patient education influences subjective health in Parkinson?s disease are lacking.AimThe aim of this study was to examine the influence patient education had on drug requirements and on subjective health status of persons with Parkinson?s disease.MethodologyA short form of Health Survey, SF-12, was used to measure perceived health. SF-12 was administered before and one month after patient education (intervention group; n= 48), and in waiting list control (n= 48).

Thymidine kinase 1 (TK1) is an intracellular enzyme involved in ?the salvage pathway? where the uncomplete parts of DNA are transformed into DNA precursors. The expression of TK1 is cell cykle specific, with the highest level during S-phase when DNA-synthesis is most active. One kind of TK1 is present in serum and an increase in TK1 activity in serum is due to either the level of DNA synthesis in the body or the number of cells dying in a state of replication. This can be used and is used as a marker for prognosis and evaluation of treatment in human patients with leukemia and lymphoma.

Barns sätt att uttrycka sig varierar mycket från vuxnas beteende och dessa faktorer tillsammans gör det svårt att vårda barn med smärta. I prehospital vård möts man av barn med smärta och situationen kan göra det svårt att smärtbedöma barnet. Vid behandling av smärta är smärtskattningsinstrument ett redskap för att få ett konkret värde på smärtans intensitet. Det finns olika instrument anpassade för olika åldrar. Syftet var att beskriva olika metoder för smärtbedömning av barn vilket gjordes genom en systematisk litteraturstudie.

AbstractThe Energy Declaration is a law that will come into effect October 1: Th 2006. This report has Värnamo municipality as principal and shall clarify what the estate owner in general and Värnamo municipality in particular need to know about this law. Another part that is going to be dealt with is how large the future need for energy experts in this field will be, and which competence that will be demanded for them.The work will in general deal with simplified energy declarations for apartment houses and public buildings, since these buildings are the first to be involved with energy declarations.The energy declaration will consist of a number of important components.? Energy power i.e. how much energy the building consume? If the ventilation control is done? If the radon Measurement is carried out? Recommendations of measures to improve the energy power? Reference value to compare the buildings energy power againstAccording to the law the declaration shall been made by an independent expert, which will need certain information for this.

Syftet med studien var att undersöka patienters upplevelse av smärtlindring och livskvalitet efter botoxbehandling i smärtlindrande syfte samt patienternas inställning till Botox.Metod: En kvalitativ intervjustudie med en deskriptiv och explorativ design. Urvalet bestod av sju patienter, sex kvinnor och en man, vilka behandlas men botoxbehandling vid Smärtcentrum på Akademiska sjukhuset i Uppsala.Resultat: Materialet analyserades enligt syftet under tre kategorier: smärtlindring, oro/nedstämdhet samt inställning till Botox. Samtliga informanter har fått en minskad smärta till följd av botoxbehandlingen och upplever att livskvaliteten förbättrats. Trots biverkningar känner sig patienterna nöjda med behandlingen så länge fördelarna är fler än nackdelarna. Ingen av informanterna förutom en kände någon oro/nedstämdhet.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of Measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

Abstract    Objective: The aim of the present study was to investigate if inclinometer estimates of arm posture during paper mill work differed between periods of different arm visibility. The aim was also to identify strategies for and difficulties in assessing body-visibility on video. Methods: The study consisted of two parts, where part 1 aimed to investigate the validity of observation-based assessment of arm posture during paper mill work. Study 2 was a survey among people with experience in assessing the posture of paper mill workers from video. Results: The total time for the right upper arm visibility indicates that it was on average visible in 54%, partly visible 15 %  and not visible 31%.

Digital artefacts such as smartphones have become an intricate part of our daily lives both private and professionally. They have evolved from doing simple tasks to become a form of expression, as well as acting as a gateway to the digital world of connections. We rely on various technology such as Wi-Fi networks to connect with others. They in turn have become more available and today, many establishments offer free network to their customers. With these developments comes different kind of risks for the user.

The development in photogrammetry has created possibilities for new methods in aerial images acquisition. Remotely-controlled imaging from an unmanned helium zeppelin is a new and relatively unexplored acquisition. The purpose with this degree project is to evaluate the accuracy of this kind of low-height photographing system, a task given from the consultant company WSP, in Sweden. Landbadet in Uddevalla municipality was chosen as a test field for the zeppelin. Seventeen images distributed over three strips were acquired from the flying height of 80 m.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and Measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.