This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

Purpose: To evaluate how a treatment period on four weeks in a warm climate influences physical function, condition and the patient's experience of the climate effect of patients with ankylosing spondylitis. Method: 10 persons with a diagnosis of ankylosing spondylitis went through four weeks of treatment on Centro Forestal Sueco, Marbella. The treatment consisted of both physical and theoretic lessons given of a rehabilitation team. All patients were examinated measured for physical function and condition before treatment, after two weeks and at the end of the treatment. To measure physical function, Timed-Stands Test, Timed Get Up and Go, The Bath Ankylosing Spondylitis Metrology Index, Index of muscle function and functionestimitation of shoulder/arm were used.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Since Internet has become a more important and more certain source of information the user require greater and more demands than ever before on the layout and function of different web pages. When search engines gives us the opportunity to millions of hits in just a fraction of a second it?s essential to optimize the structure and architecture, which forms the foundations of all the content. In a time when a company?s digital footprint plays an important role for the costumer and the transmitter it?s of utmost importance to have a steady, well-structured foundation to build new platforms of information on.But how do you manage to build a good foundation? Some of the most important key elements in Information architecture are Organizing, Navigation, Search and Labeling.The aim of this study was to create guidelines for a user-friendlier interface, by analyzing the principals and gathered data.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

IASB is currently working with the replacement of IAS 39 Financial Instruments: Recognition and Measurement. The new standard IFRS 9 Financial Instruments is said to be based on principles as opposed to the more rules-based IAS 39. This thesis examines the third phase of the project regarding micro hedge accounting. The expressed goal from IASB is to provide more useful hedge accounting information by reducing complexity of the standard. To examine the potential effects of the transition from the rules based IAS 39 to the more principles based IFRS 9, we have performed a case study on a major Swedish bank.

Bakgrund: Smärta är en av de vanligaste orsakerna till att människor söker akut vård. Adekvat smärtbedömning är förutsättningen för god smärtbehandling. Syfte: Att belysa resultatet av sjuksköterskans användande av smärtskattningsinstrument för bedömning av akut smärta hos vuxna patienter på akutmottagning. Metod: Litteraturstudie med ett systematiskt arbetssätt. Resultat: Val av smärtskattningsinstrument: VAS och NRS är tillförlitliga instrument för att bedöma akut smärta.

This paper investigates the compensation for risk in the context of the Swedish stock market with a special focus on downside risk. Using daily market data collected from the A-list of the Stockholm Stock Exchange between the years 1983 and 2005 the purpose is to answer the question whether Swedish investors are compensated for holding stocks with high downside risk, measured as downside beta. Using panel data analysis it is shown, in accordance with most previous evidence in international research, firstly that stocks with high beta values on average experience higher returns than stocks with low beta values, and secondly that stocks with high downside beta values experience higher returns than stocks with high beta values in general. On the other hand, cross-sectional regression methodology using a bivariate regression approach shows that downside beta does not explain excess returns very well. Instead, regression analysis suggest that high upside beta does a much better job in explaining excess return over this time period compared to downside beta.

Eutrophication was recognized in the early 1900's and results in severe algal blooms, increased biomass production and eventually leads to an altered ecosystem. In Mälardalen we find the most eutrophic lakes. Most of the applied phosphorus and nitrogen into seas and oceans comes from agriculture, and the nutrients losses are affected by local weather conditions and soil type. Guidelines for storage and distribution of manure were introduced in the 80s, and the rules were strengthened January 1, 2010. Localities and previous county administrations can whether there are special reasons, grant an exemption for manure application during winter-periods despite the current ban.In this essay I have examined how many exemptions of manure application that has been granted at the Sagån river, and what implications it has for the eutrophication of Lake Mälaren.

Magnetic resonance imaging (MRI) has the potential to be used for the diagnosis and study of osteoarthrosis in the equine tarsal region. In the development of new diagnostic MRI techniques cadaver specimens are often used. To allow the use of cadaver legs for these types of studies it is important to know the effect of time after death on the MRI image. Since the relaxation times are temperature dependent, it is interesting to examine whether the time after death and the temperature of the cadaver may play a role in the image appearance and quality. The radio pulse sequences that show the different types of tissues are also important to know when pathological evaluation with MRI is used.

Ellos was founded in 1947 by Olle Blomqvist and quickly grew into one of the leading mailorder businesses in Sweden. Ellos Group is in the current situation Scandinavia?s largest ecommercecompany and since 1997 owned by the French holding company Keering. Thismeant that Ellos became a part of Redcats Nordic along with brands such as La Redoute,Verbaudet , Daxon and others.2010 started a project with the aim to develop a logistic model for these products. The resultwas the department Redmap on Ellos that would serve as both a hub and distribution channelfor Northern Europe.