The study has been done on behalf of and in cooperation with LRF Konsult. The purpose of the study was to try to find out how forest estate buyers valuated different parts of the estate at the time of the purchase and to see if it was possible to identify different trends between different kinds of purchasers. The study is delimited to Västerbotten County and all the purchases were made thru LRF Konsult. The background of the study is that the forest estate purchasers are paying more and more for the forest estates. The prices are often much higher than the net present value which means that they are paying for something more than just the timber value. The study is made with a questionnaire mailed to one hundred forest estate purchasers. Answers got returned from 48 of them.

The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.

Vindkraftverk ansluts idag i snabb takt till elnät runt om i världen. Elnäten är ofta inte tillräckligt dimensionerade på platser där vindkraftutbyggnad är lämplig vilket leder till ett behov av nätförstärkning. Förstärkning sker konventionellt genom att övergå till en högre spänning, något som kan vara förenat med stora kostnader och ledtider. Bland annat därför har en filosofi med beteckningen smarta elnät uppstått, som handlar om hur elnätsystemet ska se ut när det är mer anpassat till de nya energikällornas karaktär och samtidigt medför ett mer effektivt totalutnyttjande. För vindkraftverk kan det då handla om att i högre grad än idag reglera produktionen och understödja nätet, t.ex.

The aim of this master thesis is to measure library service quality in two groups of libraries, newly developed and well established, and to see if there are any differences in the users perception of the dimensions in LibQUAL+. The thesis also examines the different perception of quality for the user groups: undergraduate students, graduate students, and faculty. Another approach is to test the Swedish translation of LibQUAL+. Different theories on service quality are presented but the main theories are from the marketing perspective. The grounding and development of LibQUAL+ is described as well as the use of the instrument in different libraries.

An increasing amount of companies and organizations are starting to implement the use of cloud computing in their business. This trend results in that software, which was previously sold and distributed to the customers whom then had to install the software on their own computers, now is being replaced with Software as a Service (SaaS). SaaS makes software available through the customers? browsers, which results in that the service providers only have to administer a single application. The process to migrate a distributed application to a service delivered as a SaaS lacks sufficient investigation; this paper will provide some guidelines for conducting such a pro- cess.

Insikten om vikten av att använda vetenskapligt beprövade bedömningsinstrument inom arbetsterapi ökar. Många instrument för bedömning av arbetsförmåga uppvisar en brist på vetenskapliga kvaliteter såsom validitet och reliabilitet. Detta medför ett behov av att vetenskapligt testa de instrument som idag används samt vid utvecklingen av nya instrument använda sig av systematisk vetenskaplig metodik. Syftet med denna studie var att utföra en initial prövning av innehållsvaliditet och användbarhet för bedömningsinstrumentet Assessment of Work Characteristics (AWC-1). Stipulativa definitioner av innehållsvaliditet och användbarhet användes för att avgränsa studien.

In this bachelor thesis a complete prototype of an industrial vibration measurement platform has been developed. By measuring a number of variables such as acceleration, temperature and speed conclusions can be drawn on machinery health. The aim is to evaluate hardware and software solutions for a possible future product. Based on a requirement specification a proper hardware design has be developed. The hardware consists of a four-layer PCB with an ARM Cortex-M3 microcontroller and about 250 other components. The PCB was designed, assembled, tested and finally housed in a box.

The assignment is issued by Scania Maintence AB seeking a new approach to detect power changes in their industrial processes. The work has taken place at Ångströmslaboratoriet and tests have been performed at Scania AB Södertälje.Today?s society consumes enormous amount of energy. In both economically and environmental view, it is important that the processes are effective, with high power factor. There are many ways to measure power in the industry, what they all have in common is that the installation is advanced, requires time and planning.

The organized and controlled form of collecting consumption taxes and toll from the import and export trade goes back to the 17th century in Sweden. The customs administration and procedure were regulated by royal announcements, and the majority of the documents found in the customs archives represent thus records stipulated by such notifications. The customs archives can be used for research on several levels; the announcements reflect currents within both the domestic and foreign politics, while the account lists for financial statistics portray the extent of the trade. The various lists of compilation can be further used to follow for instance the development of different units of measurement, the expansion of tax rates, the value of trade goods or the changes in monetary units or systems. The diaries, architectural plans of the customs offices and maps of the toll areas place the customs officials and their work within the local scenery.The thesis focuses on archives deriving from customs located at harbors and on the Swedish-Norwegian border in the county of Dalarna.

A new build in the Swedish nuclear power system would entail increased re-quirements for the proposed repository, which is adapted after the reactors of today. With a fast reactor, capable of burning nuclear waste, operating in parallel with the light water reactors, the increased requirements on the repository could be reduced.In this thesis, simulations of a light water reactor and a fast reactor have been performed by using the Monte Carlo code Serpent to investigate the changes in the fuel inventory. The light water reactor in the study is a boiling water reactor and the fast reactor of the type sodium-cooled fast reactor and they have been used for three different operation scenarios.By studying the fuel composition and the results from the simulations of the three scenarios conclusions can be drawn. Conclusions regarding the change of the fuel inventory and decay heat in Clab as well as the interim storage facility and in the repository. Depending on the operation alternative the changes dif-fered significantly and especially regarding the mass of burned actinides for different fuels in the fast reactor.The lowest increase of fuel assemblies was meet when using 50 years old fuel with 20MWd/kg U burnout and 2,0 % enrichment for start up of the fast reactor and 30 years old fuel assemblies with 50MWd/kg U burnout and 4,7 % enrichment for the further operation of the reactor.The increase of the number of fuel assemblies was 3174, which is equivalent to 641tons of heavy metal.

Hematology-instruments that analyze blood cells can at specific cases be followed by manual counting with a hemocytometer. The plastic hemocytometer which has a fixed coverslip and is assigned for disposable use, appears to reduce the problems arising from the use of the traditional glass hemocytometer, for instance coverslip-application difficulty and dust particles. Capillary whole blood sampling may be useful for patients at the emergency department and in addition, a smaller volume of blood is taken compared to venous blood sampling. This study will focus on the platelet- and leukocyte count (PLT and WBC) in venous and capillary blood, in order to compare the plastic- and glass hemocytometers with Sysmex XN-2000 (Sysmex Corporation, Kobe, Japan), and verify if capillary whole blood sampling can be used for the measurement of these hematological parameters. 30 subjects donated both capillary- and venous blood samples and these blood samples were analyzed with glass- and plastic hemocytometers with Sysmex XN-2000 as the reference method.

Since their invention in 1999, CubeSats have become a widespread standard for small picosatellite missions. CubeSats allow for quick development of satellite payloads and launch in space without the high costs of a normal satellite. Emphasis during the CubeSat design process is placed on use of commercialoff- the-shelf (COTS) components and reuse of previously-designed units.This report describes the interfacing of a scientific magnetometer, the Small Magnetometer in Low-Mass Experiment (SMILE) to such a CubeSat mission, the Space Weather using Ion spectrometers and Magnetometers (SWIM). Design of a complete platform for use in multiple such missions is presented here.Modularity is one of the key aspects followed in the course of the work. A new board containing the analog pick-up and compensation circuitry for SMILE has been designed to fit inside a CubeSat frame.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

Due to the wide usage of different databases administrated by the Swedish government to keep control over its citizen?s the issue has arisen concerning if this information is subject for other purposes then originally acknowledged. Executives induced in recruitment for labour has over the years extended their need for information accumulated by these systems. Especially data from the criminal records registry are now being used as a normal step in the employment process among a vastly growing spectrum of enterprises and businesses all over the country. This thesis aims to illuminate the subject by grasp to what extent the described behaviour can be considered legally accepted according to the law or if these actions are inflicting with the foundational juridical principles that has to be ensured by the Swedish government due to our constitutional law.A strict jurisprudential method has been applied throughout the entire thesis to ensure the reliability of the results. The diversity of sources has gently been put together to assure the overall quality.

The purpose of this thesis was to investigate if Swedish agencies preserve their websites according to the Swedish archival legislations and guidelines. As a theory the OAIS Reference Model (Open Archival Information System, developed by US Consultative Committee for Space Data Systems, CCSDS) has been used as a model to show how important it is to develop strategies for public digital information which has to be preserved for long term. The ingest function in the OAIS Reference Model demands that files are prepared for long term preservation and requires that the digital information fulfils established technical requirements.In the study the Swedish National Archive and their advices about preserving websites to archivists on the Swedish agencies are being studied. To control if the agencies meet the requirements for their management and preservation of their websites a survey was sent out to investigate if Swedish agencies preserve their websites. According to the survey result, 84 of 113 agencies preserve their websites in some way. If the technical requirements really was met could not be verified in this thesis, the results was relied on the responses from the authorities.