Dogs presenting with vomiting and abdominal pain, are common patients at the small animal clinic, and the reason for these symptoms can have various aetiologies. One common reason for these symptoms is obstruction of the small intestine caused by a foreign body. Obstruction of the small intestine is best diagnosed by using radiography, contrast-study if needed, and ultrasound. To avoid further examinations, diagnosis from plain radiographs is preferable. One of the signs of illness one can detect from these examinations is a dilation of the small intestine proximal of the obstruction, caused by gas or fluid; ileus.

The possibility for plants to utilize phosphorus in soil is a prerequisite for conducting agricultural production, both small scale and professional. Spreading of phosphorus fertilizers and manure is therefore seen as a necessity in today's agriculture in order to achieve high yield. Manure management, livestock farming and manure storage could contribute to the eutrophication of lakes and rivers. For instance, when the ground becomes saturated, phosphorus leakage could be seen in surface runoff or in point sources resulting from inadequate manure storage management.In the municipality of Växjö there is still many bodies of water that do not reach the Swedish environmental water quality standard of "good ecological status". This thesis has therefore analyzed the manure management and storage on agricultural farms which may have contributed to eutrophication in the municipality.The method for this thesis was a literature study, a questionnaire survey with 820 receivers and a summary of issued inspection reports from 2013.The results highlight the ways in which agriculture may have contributed to the eutrophication of lakes and streams in the municipality of Växjö.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

The tomato is an important crop worldwide, and in recent years it has received great attention due to its rich content of carotenoids, which in studies indicate to have health benefiting properties. Many studies have been done in this area of research and in how to optimize the carotenoid content in tomatoes and tomato products. The objectives of this essay were to summarize present data in this field. The results were as follows:There are nine different carotenoids identified in tomatoes. Lycopene and ?-carotene are the ones that have been given the greatest attention.

This report aims at giving you as a reader a basic knowledge in measurement techniques used in the road/land construction and witch instrument and methods that is commonly used. It also tries to shed light on the problem with unfinished or incomplete blueprints, which cause additional work performed by the surveyor. This report is written in collaboration with PEAB Umeå whom has given insight in their work.The goal of this report is to examine what kind of work surveyors has to perform on blueprints delivered by a technical consultant. The reader of this report gets a run-through of the different theoretical measurement techniques used today and a short explanation of different measuring instruments used by surveyors in their day to day work. Computer programs used in the field of construction are briefly explained, and some of the most common file extensions used, for example dwg and Land-xml.The report concludes in a questionnaire that was sent out to surveyors employed by PEAB.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

This thesis deals with the design of a combinated rescue-, personal-, and firefighting elevator for a nuclear waste storage facility to be constructed by the client SKB, Svensk Kärnbränslehantering AB. SKB:s mission is to dispose of all nuclear waste from all swedish nuclear power plants. The storage facility will be built in the rock 450 m under the surface and will consist of several kilometers of tunnel where capsules containing the nuclear waste will be placed. It will also hold a central area which contains spaces necessary for the operation and construction of the facility, such as elevator hall, storage hall etc. The facility will have two ways of access: a vehicle ramp and an elevator shaft.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

Background: Peripheral arterial disease (PAD), as a consequence of atherosclerosis in the arteria of the limbs, affects one of ten Swedes older than 65. PAD can develop slowly and silently, and involves an increased risk for cardiac infarction and stroke. Measurement of the patient´s ankle blood pressure and calculation of the ankle-brachial index is an evidence-based method to discover PAD. Objective: To investigate how district nurses and general practitioners perceive this method of examination and experience possible obstacles to why it is not more commonly applied at primary health care centres. Method: Data collected by semi-structured interviews have been processed by qualitative content analysis with a manifest onset.

Strong relationships are something that is really important for companies to succeed with, in purpose to increase and protect their market shares. After major research on the subject, it has been found that variables like exchange of relationship, trust, control mutability, satisfaction and commitment are important in the establishment of measuring a relationship. The purpose with this thesis was to: increase the knowledge on how companies measure, and then consequently evaluate, their relationships. To answer the purpose of the study we chose to do a case study at Stadium AB, which is a retailing concern with a high level of customer contact on a daily basis. The conclusion is that trust most likely is the key variable in measuring relationships.

AbstractTerrace III in the Birka Garrison. An analysis of function based on artifact quantification and find preparation. This paper deals with Terrace III in the Garrison of Birka, Uppland, Sweden. The main purpose is to investigate the function of Terrace III. The analysis consists of two parts.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

A numerical simulation case involving space plasma and the evolution of instabilities that generates very fast electrons, i.e. approximately at half of the speed of light, is used as a test bed for scientific visualisation techniques. A visualisation system was developed to provide interactive real-time animation and visualisation of the simulation results. The work focuses on two themes and the integration of them. The first theme is the storage and management of the large data sets produced.

The purpose of the present study was to explore if blood lactate levels are increased in bitches with pyometra, and if the lactate measurement could be used as a prognostic indicator and to determine outcome. The present study included 16 bitches with pyometra that were admitted to the University Animal Hospital, Swedish University of Agricultural Sciences, Uppsala, Sweden. For comparison, a control group consisting of 14 healthy staffowned bitches was also evaluated. In all bitches, a physical examination was performed and blood samples for analysis of haematological and biochemical parameters were obtained. In all bitches with pyometra, surgical ovariohysterectomy was performed and a uterine sample for bacteriological culture and identification was collected.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..