An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

At present day there are several different methods for measuring of paved surfaces.The most common methods today are measuring with a total station, the GlobalNavigation Satellite System (GNSS) and terrestrial laser scanning (TLS). Recently thedevelopment of unmanned aerial vehicles, known as drones, has increasedexponentially and today there are several ways of using drones for measuring surfacesby photographing and laser scanning.This thesis contains a comparison between the methods terrestrial laser scanning(TLS), and unmanned aerial vehicle photogrammetry (UAV). The measurements havebeen applied on two different test surfaces, one of asphalt and one of gravel. Thepurpose of the comparison is to investigate whether the airborne photogrammetry isequivalent accurate in its height levels as the terrestrial laser scanning. For thecomparison to be more extensive, these two methods have not only been comparedin precision but also in the areas of ease of use and economy.The precision was analyzed by comparing the height levels in randomly placed controlpoints on the test surfaces.

This study investigates whether the permanent measurement bias (PMB) has changed over time for Swedish companies listed on the Stockholm Stock exchange at least one year during 1996-2000 or 2005-2010. By using the Residual Income Valuation-model the markets' implicit value on PMB is generated through reversed engineering, as values for all variables except PMB are entered such as the market perceived them at the specific valuation date each year. This implicit value is classified into industries and then sorted by their median. Statistical tests are performed to see if there is a difference between the industry median and the accounting-based values on PMB. The difference from period one to period two is also statistically tested for.The study finds that the implicit values on PMB have changed somewhat between the periods; however the fluctuations are not statistically significant.

The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.

Smärta är något subjektivt och det är bara patienten som kan säga hur ont han har. Smärtskattning ger sjuksköterskan en uppfattning om patientens upplevda smärta. Sjuksköterskor kommer ofta i kontakt med patienter med smärta, därav vikten av att kunna skatta smärta hos en patient på ett adekvat sätt. Olika smärtskattningsinstrument har tagits fram och är ett hjälpmedel till sjuksköterskan vid smärtskattning. Syftet med denna studie är att få en ökad kunskap och insikt i smärtskattningen ur en sjuksköterskas perspektiv.

The purpose of this thesis is to examine and analyse which effects a service strategy has on the control system of an organisation. The thesis takes a service perspective, and it is assumed that a service strategy gains competitive advantage and that the goal of the service strategy is to increase the customers? satisfaction level. A qualitative in-depth case study was performed on a Swedish beauty company. The organisation?s vertical structure was examined, from central to local level.

Event marketing has during the last decade become a wide spread marketing method. This is because the marketing clutter has increased heavily during the past years and brands are looking for new ways to reach their target audience. The previously well accepted marketing measurement "satisfaction" has shown tendencies no longer to be sufficient for success in today's competitive marketplace. Therefore, the research has somewhat moved to the measurement "brand love" to explain differences in strategic consumer behavior. That is the background to why this report examines and answers the question if a brand through event marketing can enhance brand love.

Mattias MogardGustav von HeijneSammanfattningFör framgångsrika företag är det essentiellt att ha kontroll över sina resurser. Studien tar upp ett ämne som handlar om att skapa en överblick och en medvetenhet om resurseffektivitet inom ett företags produktion.Performance measurement är ett tillvägagångssätt för att kvantifiera aktiviteterna inom en produktion. Data struktureras genom nyckeltal, Key performance indicators (KPI:er), till övergriplig och användbar information. ISO 22400 är en uppsättning standardiserade nyckeltal med ändamålet att appliceras på automatiserad produktion. Studiens syfte är hitta vilka av nyckeltalen från ISO 22400 som är lämpliga att använda vid mätningen av en helt automatiserad produktionskedja som tillverkar motorblock.

The ongoing harmonization process aims to incorporate IFRS regulations into the Swedish accounting. As a consequence investment property?s starting from 2005 may be valued using the fair value method, in accordance to IAS 40. This involves major changes for listed property enterprises that from now on can value a large extent of their assets to fair value. All parties don?t appreciate this progress, opponents to fair value have expressed great concern that fair value don?t work in practice.

The object of this examination project is to produce a method of work sampling at Rapid Granulator AB. The aim is to perform the method at the company and evaluate if it is executable. The study is delimited to the basic construction of the 45-series in the assembly hall.Preparations to produce the method of the work sampling resulted in definitions of activities, a form and a product tree. Several days were spent studying the assembling to learn and understand the entirety.The work sampling result showed a large amount of no value adding time that was used in the assembling. Some of the activities could be reduced and we observed some problems during the assembly process.

Background: Elderly people with visual impairment increases in the society. To measure vision with visual acuity charts doesn?t indicate how patients with Age-Related Macular Degeneration (AMD) experience their disease. Aim: The aim of the literature review was to describe patients? experiences of living with age-related macular degeneration.

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

More often consumers demand instant dry soup that can be prepared with a water temperature below 100o C, which is currently not possible, because the dry soup becomes too thin when using water with a lower temperature. In this study, various kinds of starch studies were made to optimize the starch used in the existing product to make it more viscous at both high and low temperatures. The result was that one of the two starches present in the existing product was retained by change in quantity as it contributed to important flavor parameters. The second was removed and replaced with a starch that made the product more viscous at lower temperatures. To find out if the new product differed from the existing product a viscosity measurement and a sensory paired preference test were made.

The main purpose of this essay is to study the role of documentation in Swedish health care today and the consequences of the augmentations in paper work that have taken place during the last couple of decades. The method used in this study is interviews with health care personnel.The following questions are treated:-       What kind of documentation has increased in Swedish health care?-       How is the patient/health care professionals affected?-       How is the work of the health care professionals affected?The conclusion of the essay is that the increasing amount of time spent on documentation that for much part has never been performed before, (such as risk analyses, statistics and writing much more thorough charts), has consequently left very little time for actual patient care. The research also showed that faith in health care professionals has significantly decreased and that one of the major reasons for increased documenting is the anticipation of and therefore protection against potential complaints. Finally there seems to be a greater focus on being service-minded rather than on providing quality health care..

: This bachelor thesis explores library students? attitudes towards marketing in libraries. The aim is to find out if they are interested in working whit marketing questions in their future workplaces. To perform the study the author used a questionnaire survey and 48 students completed the survey. The answers where converted into present form and 10 charts were created to show the result.