Introduction: Dolomite AB was in need of a dummy arm for crutch testing, to complement their existing test capabilities. Background: A large number of people need crutches on a daily basis. For them it is essential that their crutches do not fail. ISO (the International Organization for Standardization) conducts ongoing work to guarantee the durability and function of e.g. crutches.

The poultry red mite, Dermanyssus gallinae, is a common problem in poultry facilities, causing great discomfort for the hens and effecting the production economically. Few efficient acaricides are available and there is a need for new control methods since resistance has become a problem in some cases. The aim of this study was to evaluate the efficiency of the new liquid silica control agent Ectopar, on the poultry red mite. An initial in vitro test of Ectopar and its two components individually was performed, where live mites were sealed in together with filter paper impregnated with one of the three solutions prepared. The survival of the mites was thereafter recorded repeatedly during a period of 120 hours and compared to a control. For the field study, two poultry farms with different housing systems were used, one with furnished cages (farm 1) and one with a single tier floor system (farm 2).

In order to produce grain in an economically rational manner numerous decisions have to be made. One of these decisions is what tillage system to use. The cost of the tillage system is a large part of the total cost in grain production. Different tillage systems result in different distribution of fixed costs, operating costs and timeliness costs. The price of the produced grain and cost of inputs also affect the best way to produce grain.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

Energy and environmental demands regarding buildings have become an increasinglydiscussed topic, both in Sweden and in Europe as a whole. The general trend indicatesthat greater efforts are being put into the energy efficiency of the built environment.There are already numerous examples of houses with a low energy demand, and thenumber of low energy buildings is constantly growing.At the time being, the maximum level for energy demands for housing in Stockholm is110 kWh/m2year, but as soon as next year the limit will be changed to 90. The Swedishagency Energimyndigheten is currently conducting a project to interpret the EU Directiveon the so-called Nearly zero energy buildings, and the preliminary results indicate thatthe level of requirements for purchased energy will end up with about 55 kWh / m2year,which is in line withtoday?s recommendationsfound in FEBY's Kravspecifikation förPassivhus.Starting with a low-energy house in Henriksdalshamnen in Stockholm, we have analyzedvarious energy-efficiency measures and their influence on power and energy needs. Thefinancial aspects associated with the measures have been studied using a model of lifecycle costs.The measures were initially studied individually to give an idea of how much impact theyeach had.

Idag besöker vi inte längre webbplatser enbart via datorer, utan även mobiltelefoner och surfplattor. För att göra interaktionen på en webbplats användbar via flera olika plattformar blir det allt vanligare med responsiv anpassning. Denna utveckling ställer högre krav på den grafiska formgivaren som bör ha god kunskap om de plattformar som designen tillämpas på för att nå högsta möjliga användbarhet. En grafisk formgivare ska alltså förstå vad användbarhet innebär och hur denna kunskap ska tillämpas i designen. Kandidatarbetet undersöker vad som definierar användbarhet och vad grafisk design bidrar till i skapandet av responsiva webbplatser. Utifrån litteraturstudier i samband med en produktion i form av en responsiv webbplats, presenterar vi i detta arbete våra metoder för hur den grafiska designen ska uppnå användbarhet oavsett plattform. ---- We no longer visit websites solely by using computers, but also mobile phones and tablets.

Title: Go for it! - A study of anxiety in relation to students performing in ensemble class.This study discusses anxiety in relation to students in ensemble performance. The expectations on musicians are extremely high and demanding. They are expected to perform to the maximum of their ability despite both physical and mental pressure. I present in this study the result of the interviews I have performed with three students at Swedish Academies of Music. The study shows that all of the students included are in one way or the other suffering from anxiety in relation to performance.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

Feedback tools support electricity users within the Swedish residential sector to increase their knowledge of electricity and the electricity market as well as to become more aware of their electricity consumption, which in turn encourages a reduction and an increased flexibility of electricity use. The primary aim of this study is to identify and analyse how existing feedback tools can be improved, to ensure that they contribute efficiently to the achievement of the EU objectives congruent with a more sustainable energy system in 2030, emphasizing: greenhouse gas reduction, increased energy efficiency and an increased share of renewable energy. In order to reach the primary aim of this study, existing feedback tools have been identified and mapped and interviews with feedback tools providers have been conducted. The study is limited to three research areas: the practical functions of feedback tools, available technology and the use of feedback tools.The use of more efficient feedback tools will provide an increased success rate for energy management, which includes both behavioural changes and energy efficiency. According to the results from the interviews conducted for this study, an increased use and user frequency is important to utilise the energy management potential.

Background: Today, the trademark is the heart of the company and the management of brandimage and identity require certain attention and care. In an increasingly tough business climatewhere the brand today has a central and important role, it is understandable that the companieswant to take maximum advantage of it. In the company the brand is a great resource with analready known identity and established values that can help new products to enter the market. Toextend the brand is a popular growth strategy but it is important to do it properly in order not tofail. J Lindeberg and Peak Performance are two Swedish fashion companies which both havemade brand extensions.

Prisons are for many an unknown world, and few know about the prison culture which includes unwritten rules, power structures, interactions and relationships between inmates and correctional employees.While many think that Swedish prisons are too comfortable,inmates are facing extreme stress due to surveillance and detention, by depriving inmates their possibility to shape their own lives. When the inmates is deprived of control over their own life?s the penal system have great power to shape and to influence the inmates.The purpose of this paper is to investigate prisoners' experiences of treatment and exercise of power in prisons. Starting point is to examine what are the kinds of relationships between prison officers and inmates from a power perspective, if there is any difference between the closed and open prisons and how the inmates affected by the structures that exist.Based on my overall purpose, and with my informant´s stories which revealed a number of similar points, four main headings were developed; Mass media and society´s view, and unknown world, interaction between inmates and prison officers and consequences.Prison officers with the role as a contact persons as well and other staff which work close to the inmates play a significant role by supporting through motivational interviewing and can help the inmates to gain insight about their life situation and actions. My informant?s underlined that a good contact person can either help or discourage.Inmates who contributed with their experiences express that there is a big difference between open-and closed prisons.