At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

The cost of construction projects have increased during the past few years. Different actors in the construction industry work together to advocate various measures to mitigate these cost increases. One of these measures is to try to improve the efficiency in the phase of production. By striving for a kind of standardization with a constant quest for improvement, the productivity can increase while the costs of production fall.For this thesis has a case study been conducted at the construction company JM AB which is seeking this. They call the approach structured production and have implemented various measures to achieve a more productive output.Based on information from reconciliations, the cost and the spent hours of craftsmen have been analyzed at the company where the case study took place.

During my time as a student of education I have learnt that it is my responsibility, as a teacher, to adjust the ways in which I teach to the needs, abilities, experiences, and thoughts of each individual child. What I have not yet gained much knowledge on is how to go about finding the children?s thoughts.In this thesis I investigate the interview as a method of finding out how sixth graders think about their mathematics education. Four children were interviewed. In addition to these inter-views, as a means of giving a broader perspective to and a greater understanding of the chil-dren?s answers, one math lesson was filmed and the math teacher was interview on two sepa-rate occasions.What I found was that a number of factors seemed to influence the children?s thoughts and answers, and that their answers were most likely not always a mirror of their thoughts.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

Practice of mathematical proof increase the understanding of mathematics anddevelop creativity skills, problem solving, communication, logical thinking andreasoning which are all important tools not only within the subject of mathematicsbut also important tools for the society in which we are living. The aim of this projectwas to investigate whether it is accurate that proof and proving has a subordinate rolein mathematic education in the upper secondary school in Sweden. This was done byconstructing of a digital survey that was sent to approximately 100 practicingmathematics teachers in a normal size city located in the middle of Sweden. Theresults of the survey show that the teachers consider themselves comfortable withtheir own skills in teaching proof. Paradoxically, the results also show that there is alack of teaching of proof and proving in the upper secondary school, although the newcurriculum puts more focus on proof and proving..

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

The purpose of this study was to find out what the educators view on the working method Matte på burk in preschool looked like. I also wanted to find out what the educators thought about the working method. My questions are:How does the educators in preschool experience the method Matte på burk?What do the educators in preschool believe that Matte på burk can give the children?The study was carried out through a qualitative interview study with six educators. During the interviews with the educators it became apparent that the method not only focused on mathematical exercises.

This study is part of an international project, The Third Wave Project. The project aims to conductstudies with students of different cultures to see what they value as important in mathematics andmathematics learning. Part of the project involves carrying out a survey, the WIFI study. The WiFistudyaims to examine values of mathematics teaching that may affect student learning. The valuesthat are examined in this study are based on the mathematical values which are described by Bishop(1991).

The waveform of a radar signal affects the resolution in velocity and distance. The ambiguity function is used as an aid for analysing narrow band radar signals simultaneously in time and frequency. An analysing tool for wide band radar signals is missing.This thesis describes a generalised ambiguity function to be utilised for study of wide band signals. Waveforms are further synthesised with help of the developed analysing tool. The aim is to start with a certain ambiguity function and find a waveform that reproduces the same ambiguity function.Mathematical formulas are presented and implemented in Matlab to produce the wide band ambiguity function.

For research purposes Saab has developed a generic mathematical model denoted VEGAS of an aircraft with a configuration similar to JAS 39 Gripen. Today parts of Gripen backup control system are used also for VEGAS making the system subject to both corporate and defense secrecy. The main objective of this master thesis is to design, verify and implement public pitch axis flight control system for VEGAS. Furthermore, simplifications regarding the design process is to be examined. Design of pitch axis flight control system for the entire flight envelope has been carried out.

 In today?s society teachers will face students of foreign origin. It is up to the teachers to help these students gain the knowledge they need to flourish in society. Despite the fact that mathematics is a universal topic with high status in many countries, studies have shown that mathematics is a subject where a large proportion of foreign students fails. The purpose of this study was to see wherein the problem lies and describe teachers' perceptions of the barriers and the opportunities in mathematics for students with Swedish as a second language.

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

The aim is to find out how teachers apply the knowledge they get from mathematics pilots in preschool and from mathematics developer in the municipality, as well as how they work further towards the children with mathematics.The study is based on qualitative interviews with two teachers, one mathematic pilot and one mathematic developer. I used the semi-structured interview questions.The results show that teachers believe that mathematics pilots will inspire the teachers in their work with mathematics in preschool. One of the teachers who were interviewed said:?Mathematics pilots should be those that have the strongest glasses and coming up with new ideas and they push the rest of the teachers in their work with mathematics in relation to children in preschool?.The teachers use the correct terms for mathematical concepts with the children. They also stressed how important it is to point out to the kids that it is mathematics that they are doing.The conclusion of the study is that the teachers agree that it is their approach towards the children that is important and how they can lead the children?s interest of mathematics forward.

The purpose of this study is to examine the importance of a working laboratory in mathematics education, how it influences students? learning and the confidence the teacher has in the laboratory component. Focus has been placed upon the advantages and disadvantages that could follow in the working method.The method used in this essay is qualitative in order to answer all the questions that arise along the way, and in order to use this method in interviews. The interviews that has taken place has been with five class teachers that are currently teaching at a elementary school between the years of 1-5. The purpose of this study has been answered by using its literature and the qualitative method with the class teachers.The results of the research show that teachers express gratitude towards the method in use for mathematics studies.

The idea to create authentic learning situations where students are highly integrated made me want to try to develop a new method in the course Restaurant and Catering B MAKU 1208 (another field practicing cuisine). In my quest to do just the practical part as rewarding, stimulating and efficient as possible for the student, I planned for a training model with   focus on group interaction.The implementation of the model for learning was to strengthen students confidence both in themselves and in each other, stimulated to greater cooperation and it has also provided an incentive to the student's own development but not least, a growing self-confidence for many students. Several have also had an increased sense of knowing something, to have something to contribute and that their labour input actually was needed. While highlighting that further education to seek knowledge strengthens the individual's skills and consolidates and increases deeper knowledge in the professional field.In conclusion, training should be done in both individual and group basis for optimal learning process..