This report is about planning a demolition. The purpose of this report is that it should become a base for a demolition of house J at the Academic hospital in Uppsala, and also to make general help for planning a demolition. This report also contains a part about how a change in the work environment affects general people. The work started with studies of literature and design of the general part of the report and then continued with a practical study of house J. From the experience of the first two parts of the report a general help for planning a demolition was shaped.

In article 1.2 c) EC regulation 852/2004 it says that the regulation is not applicable to producers who directly supply small quantities of primary products to the final consumer or to the local retailers who in their turn directly supply the final consumer. An almost identical regulation can be found in article 1.3 c) EC regulation 853/2004. The supply by a primary producer of small quantities of primary products, of animal origin or not, are consequently excepted from these two hygiene regulations. In article 1.3 EC regulation 852/2004 and article 1.4 EC regulation 853/2004 it says that the member states are to establish national rules in their national legislation as to the regulation of exception for small quantities. The aim of this study was to investigate the handling of small quantities of primary products distributed locally in Sweden but also the handling of these products in other countries.

Today there is an even higher demand on IT-projects success rate compared to a few years ago. IT-projects must be handled more efficiently and result in a more profitable investment. In order to make the handling of IT-projects more efficient and create profitability the developers must have a broad understanding of the IT-projects characteristics and which factors that affect the result of the projects. Changes within IT-projects are often carried out through the development of a system. Since this change is more common when it comes to IT-projects it is important to handle risk and change within these kinds of projects in order to prevent and avoid uncontrolled changes.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

Detta arbete handlar om vad ett va?letablerat fo?retag skulle kunna go?ra med sitt restmaterial. Vi vet att det idag finns en ma?ngd fo?retag som jobbar fo?r att minska sitt restmaterial och ha?r presenteras fo?rslag pa? vad man kan go?ra med det som a?nda? uppkommer. I arbetet presenterar vi fo?rst hur vi ga?tt till va?ga fo?r att samla in va?r information, alltsa? hur va?r forskning gjorts.

 Date: 2008-10-06Level: Bachelor thesis within Information Technology and business economics, 15p, EIK021Authors: Anna Karlsson, akn05009@student.mdh.seLena-Maria Lindström, llm05002@student.mdh.seMagnus Wretlund, mvd05001@student.seTutor: Marie Mörndal Title: Managing IT-incidents, a case study at ICAs IT department                            OperationsKeywords: IT-incident management, IT-incident management process, IT-incident, ITIL, CCTA Problem: An organization can benefit by having an established management process of handling IT-incidents. But how can this be achieved? Are there step-by-step procedures? What´s included in the management process of IT-incidents? Is the size of the organization relevant to which model is to be chosen? Can the work of the writers of this essay result in a recommendation of a specific model for IT-incident management? These questions lead to the following essay question; How are IT-incidents managed?Purpose: The purpose of this thesis is to describe and discuss how IT incidents can be managed.Method: The writers of this essay have performed a case study at ICA, a Swedish food retail company. Eleven interviews with nine different persons have been carried out. The interviews are analyzed in the chapter called Resultat och analys.Conclusion: Our conclusion is that there are both similarities and differences in Dept.

This study focuses on the Nordic model of Extended Collective Licenses (ECL) and how this model can be used in the process of digitalising and publishing archival material such as photos, letters, maps or films. The question that this study aims to deal with is what advantages, and disadvantages, there are for archives and copyright holders when an ECL is being used. To help answering this question the ?theory of the knowledge commons? has been applied. The research question has been answered through a text analysis based on legal texts including Swedish law.

In the year 2010 a transition will take place here in Sweden from the present rules how to dimension buildings in to the common rules with have been developed in Europe, the Eurocodes. Eurocode is the term for a collection standard that contains calculation rules in how to dimension constructions and buildings. They are developed by the European standardize committee.The purpose with this examination work is to get an insight of what changes this will contribute to, and how it will affect the dimensioning. Are there going to be any differences in the dimension you finally chose?To investigate these possible differences two constructions will be calculated first in the present Swedish rules, and then in the coming eurocodes.One of these two constructions will be build completely in steel, while the other will be build completely in concrete.

Education systems face a number of challenges regarding social justice, diversity, difference, and inclusion and membership for all students in the groups that schools create. This invokes questions of how well these challenges are met in curricula and teaching materials. Through discourse analysis of eight Swedish geographical textbooks, this essay aims to seek out the perspectives surrounding difference within the subject of geography. It concludes that the idea of fixed homogenous cultures as meaningfull in differentiating among people dominates throughout the latter half of the 20th century and during the last decade. In addition, it concludes that the discourse surrounding diversity in Swedish geographical teaching materials mainly has a binary liberal view of plurality focused around tolerance.

Cellulose nanocrystals (CNC) are great candidates for composite materials. The reasons why CNCs are such attractive materials for them are due to their great mechanical properties, high aspect ratio and low density. On the other hand, hydroxyapatite (HAp) is a kind of calcium phosphate and a main component of bones and teeth. The purpose of the present study is to make oriented nano-sized composites with CNC and HAp. Although some researchers carried out to make CNC composites with HAp for biomedical materials, nano-sized and oriented ones haven?t been achieved yet.

The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.

I denna uppsats vill vi skapa förståelse för Executive Coachings påverkan på handling och interaktion i organisationers implementeringsprocesser, det vill säga verksamhetsstyrning. Studien är utförd ur ett aktörsperspektiv och behandlar fem coachade chefers upplevelse och syn på hur coachningsprocessen påverkat den egna organisationens styrningsprocess. I studien behandlar vi grunderna för handling och interaktion, kommunikation, dominans och sanktioner. Executive Coaching förväntas utveckla förståelse för interaktiva processer och hur individen och gruppen påverkas i dessa. Studien resultat motsvarar det förväntade utfallet hos den coachade ledaren.

These studies are done in behalf of Saab AB AVITRONICS in Järfälla in the form of a thesis atthe Royal Institute of Technology in Stockholm.The task was to examine the parameters that plays a role in the construction of modern radomesoperating in broadband applications.This was interesting for Saab to get an indication of which way they should go at the newdevelopment of radomes for the next generation of equipment for electronic warfare.After a thorough analysis of the influencing parameters, a optimization application was made toget a automated way to get a radome design by specifying data on the radome size, airloads,materials, etc.This is to minimise the time of the laborious work that radome development.inply.This was solved by letting ANSYS calculate the strength of the radome structure and MATLABcalculate electromagnetic data and cost models of different sizes and materials.All these parameters woven together with the optimization tool modeFrontier picks data from therespective program and perform an optimization algorithm and then iterate a step and sends thisdata to calculation programs for the new input data. In the end, we have received a convergedpoint with our optimal solution.For the presumptions and limitations for which applied for this thesis, the result was prettyintuitive. That is to say that the smaller radome - the less materal is needed and lowermanufacturing costs results in the cheapest solution possible. The reality is not so simple. Whereyou have to take more of the electrical details such as the effect on the transmitter as a majorfactor..

This essay seeks to analyze the consequences of modern information and communication technology for collective action within the framework of social movements. With references to the protests in Seattle 1999, the essay argues that the emergence of distributed collective action is closely related to the use of technology, for example cell phones and Internet. This distributed collective action can be characterized by its decentralized and self-organizing features, forming a global pattern emerging from local interactions. Whereas contemporary theories of collective action can be ´stretched´ to fit these aspects, they lack analytical tools to describe and analyze such systems. Further, their rejection of classical crowd theory is problematic, since it contains valuable insights.