The common literature about strategic alliances offers a very fragmented picture. This thesis gives a theoretical overview on strategic alliances and builds the basis for the following examination of the different dimensions most strategic alliances have. The examination of the different dimensions is the crucial point of this thesis. Here the reader gets a detailed insight into the different dimensions and the implications they have on the design of a particular strategic alliance. This examination leads in the end to a more differentiated view on strategic alliances and the insight that no simple models exist, which give a sufficient basis for decision-making and understanding strategic alliances, today.

This study concerns a selection of prehistoric metal objects of animalistic design, published at the internet site of the Swedish Statens Historiska Museum. It seeks to give an impression of the design elements used, and to find likely models for the motifs among live animals. The method used is a qualitative hermenuetic comparative study of objects, where the distinct significant design elements are being identified and interpretated. Several significant design elements are identified, and some are interpretated as representing certain animals. The amalgamation of differentiating design elements in some objects however, leads to interpretations of compound animal motifs, where some motifs are considered ambiguous and some are rendered uninterpretated.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

The study was carried out as a time study of five wood chippers placed on trucks,so?called huggbilar. They are trucks with built?in wood chipper, chip bowl and crane pulling a chip trailer. The system is used for chipping wood fuel, transporting, and delivering the chips to heating plants.

This paper presents the results from an osteological method study of the Ringsjöholm fishbone material. Ringsjöholm is located in Scania, southern Sweden and is 14C dated to 5960-5200 B.P. The aim of this paper is to critically analyse methods used on fish bone material in estimations of season. Three different approaches were used to estimate the fishing season at the Ringsjöholm settlement; 1) identified species, 2) size estimations of the pike based on Enghoffs (1994-95) regression formulae of os dentale, and 3) growth rings of the pike vertebrae.The identified species and the size estimations of the pike points to the fishing being active both during spring and summer. Growth rings analysis of the pike vertebrae didn?t give any quantitative results because of fragmentation.

The purpose of this study has been to increase the awareness of what significance models of explanation have for intervention programmes, aimed at perpetrators of intimate partner violence, within the Swedish social services. The study is not gender neutral, it centres on male batterers in heterosexual relationships. The study is based on qualitative interviews with five people working within the topical field. I analyzed their statements using an ecological model of understanding violence. The main finding was that the people I interviewed had a multiple understanding when it came to comprehending the violence, but that when it came down to the actual intervention they targeted mainly on elements in the individual spectra, such as feelings of frustration.

Syfte: Syftet är att göra en redogörelse av förutsättningar för destinationsutveckling genom en film. I den här redogörelsen kommer vi att testa valda teorier på Öland.Metod: Vi valde att utgå från en deduktiv ansats för att på så vis kunna pröva våra valda teorier om filmturism på vårt empiriska material. Utifrån våra teorier kom vi fram till kategorier som vi utgick från vid insamlandet av vårt empiriska material. För att samla in information till vårt empiriska material intervjuade vi respondenter från Öland. När vi prövade teorierna på våra intervjurespondenter ställde vi frågor utifrån de kategorier vi kommit fram till.

The purpose of ?The Lake? was to create an experience with music and visuals working with no budget.A personal purpose was that I wanted to explore new areas in design, like scenography, and combine them with my previous knowledge and skills. My method was to keep my hands busy at all times and use new materials. I also wanted to work with other creators and learn from their methods. Together with a musician I created the music and the concept for the project.

Aim: The aim of this study was to examine health professionals´ experiences of giving advice regarding sleep to parents of infants and to perform and evaluate an intervention in the form of introducing information about the sleep of infants.Method: The study was designed as an intervention study with a qualitative approach where data was collected from two focus groups in the form of interviews. The intervention consisted of the information material Sugen på sömn. There were five participants whom three of them participated in the second interview. The interviews were processed by content analysis.Results: Health professionals´ experience of giving advice on sleep was summarized in three themes. The experiences of giving advice in interaction with parents, health professional themselves experienced the power to influence the parents with the advice they gave, while the parents' previous experience and knowledge impacted on how the advice came into practice.

Photography has a big role in information sharing today. Especially in the hotel industry where it is the closest thing a customer can get to the product that is being sold. This study intends to find out how you can make use of rhetorical models and techniques of photography to enhance the communication skills of photos of hotel rooms. The main focus was to understand the difference between informative and emotional photographs and what consumers themselves focus on when choosing a hotel, and also how to use the collected information to create a larger buying interest through hotel photography. Using previous research work and quantitative data collection method, we have concluded that the informational and emotional photography methods have obvious differences but also many similarities, and are most effective used together and that the hotel consumer is more aware of the images influence then we assumed..

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Syftet med arbetet är att illustrera och utvärdera vilken betydelse undervisningen, vid en montessoriskola, har för utvecklingen av en god taluppfattning. Studien fokuserar på de naturliga talen från 0-20. Jag är montessorilärare och arbetar i en montessoriskola. Därför var det intressant att studera undervisningen på en montessoriskola. Den nationella läroplanen i Sverige, montessorimetoden och forskning om taluppfattning studeras.

The project concerns a predevelopment work for Scania AB, a leading manufacturer of heavytrucks, and was performed as a master thesis work for the program Design and ProductDevelopment at KTH. The purpose of this work was to examine how the work situation of truckdrivers, especially long-haulage drivers, can be improved with respect to prolonged sedentaryoccupation. Mental fatigue and under-stimulation due to low cognitive load during long drivescan be major risk factors for traffic accidents. Physical strain injuries to both the skeleton andmuscles are common for this working group and minimal opportunity for daily exercise alsoincreases the risk of developing blood clots in the legs, which can have serious consequences forthe driver's health.An extensive background study, both theoretical and exploratory, was performed to identify thedrivers' concerns and comfort needs. Various treatments such as massage and active sitting wereinvestigated and existing products within the area studied.

SammanfattningDet här projektet behandlar området Additiv Tillverkning (AM) för metalliska material och undersöker om det är lämpligt att använda vid produktion inom flygindustrin. AM är en relativt ny tillverkningsmetod där föremål byggs upp lager för lager direkt ifrån en datormodell. Teknikområdet tillåter i många fall större konstruktionsfriheter som möjliggör tillverkning av mer viktoptimerade och funktionella artiklar. Andra fördelar är materialbesparing och kortare ledtider vilket har ett stort ekonomiskt värde.En omfattande litteraturstudie har gjorts för att utvärdera alla tekniker som finns på marknaden och karakterisera vad som skiljer de olika processerna. Även maskiners prestanda och kvalité på tillverkat material utvärderas, och för varje teknik listas möjligheter och begränsningar.