An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The aim of this essay is to examine the handling of plastic waste on a local level in the three municipalities of Gothenburg, Malm? and Stockholm. This is achieved with the help of guidance within the theory of Multi-level Governance. By applying the EU directive 2019/904, about disposable plastic, and examining the global plastic problem, the efforts to promote sustainable use, and recycling of plastic, is analyzed. The method involves a qualitative content analysis, where the 2022 waste plans of the three municipalities, ?Sveriges handlingsplan f?r plast? by the Government Office, and the 2019/904 EU directive constitutes the base of the study.

The aim of this paper is to make a plan for local treatment with Klucel® G of a book with moulddamage. The biggest problem concerned handling the book without loosing fragments and tohandle pages that were stuck together. In some places as many as six pages where stuck togetherand it was not possible to separate them without loosing material or breaking them. The otherproblem concerned the use of waterbased adhesives that might cause tidelines and paperdistortions as seen in another volume. The use of Klucel® G dissolved in ethylalcohol functionedvery well as strengtheners and also as an adhesive for lamination.

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.

Då jag varit ute på praktik har jag sett att elever allt för ofta bara sitter och räknar i läroboken. Vi matematiklärare måste bli bättre på att variera och börja laborera i vår undervisning. Både för att få med eleverna kunskapsmässigt i undervisningen och för att få dem intresserade och engagerade. Jag har därför i mitt examensarbete undersökt om lärare i år 4-6 använder sig utav konkret material i sin matematikundervisning. Mina problemformuleringar var:- Vad använder lärare i år 4-6 för konkreta material i sin matematikundervisning?- Hur gör lärare i år 4-6 för att konkretisera matematikundervisningen?- Varför väljer de som konkretiserar matematikundervisningen att konkretisera?Metoder som jag använt i min undersökning är litteraturstudier och intervjuer.

This essay examines how four archaeology scholars reason about gender. I have used a qualitative method in making this study of their dissertations.  The aim is to obtain a deeper understanding of gender identity in prehistory, gaining a broader appreciation of how this might be expressed through archaeological material. This essay takes its theoretical departure from postprocessual thinking, where gender perspectives, including feminist and queer theories are in focus. The result of this study shows that the scholars have a postprocessual, structuralistic theoretical perspective in common, and that they use stereotypical identity-descriptions.

This report describes a final thesis done during the spring of 2008 as part of the bachelor degree in computer engineering degree at the School of Engineering in Jönköping.The client is working in the consulting business and is involved in, amongst others, work regarding information security. Within this field they perform so called Threat, Risk and Vulnerability assessments. Today these assessments are done by a predefined method, but many details are controlled by the person documenting the project. A wish was made that the implementation was standardized, it should also ease the task of estimating the need for time and money. The solution for this seems to be a software tool.

The purpose of this report is to study the risk of dust explosions at the candy manufacturing plant Leaf Sverige in Gävle, Sweden. The risk analysis was conducted with a preliminary hazard analysis, PHA and event trees. The analysis focuses only on the risk posed to employees and material damages at the plant. No third person injuries have been considered. Another purpose of this report is to study risk awareness and risk communication concerning dust explosions.

The domain of this thesis is Personal Information Management (PIM) which is a sub-domain to human-computer interaction (HCI) that specifically concerns the interaction between human and information. The purpose of the study is to make an exploration of information management in a scientific research setting, to study which tools and strategies for information interaction that are used in the context and to suggest possible improvements of today's practices. Three in-depth interviews with scientific researchers have been conducted followed by a qualitative analysis of the results. The results show that there are great variations among the three respondents and that there can be distinguished as much as 15 different dimensions that when put together forms a unique PIM profile for each individual. The recommendation following this is that tools for PIM have to allow a high degree of individualisation.

Arbetet handlar om inkludering och beskriver en kommuns strategi för att förändra sin verksamhet från en exkluderad särskola till att alla elever erbjuds plats på sin hemskola..

The purpose with the work is to study Fortums activities with hydro power plants, dams and reservoirs mainly in a premise jurisdictional perspective and to show how GIS would be a helpful tool for the future.A great deal of the information that the Generation Hydro-division at Fortum are managing have a spatial element. That means that it is possible to spatially join this information to a geographical polygon, line or point. This information is today gathered from several different sources, such as files, paper maps and digital data of several kinds. A Geographic Information System (GIS), as and aid besides the ordinary tools should be an effective support in the everyday work with questions of a premise jurisdictional nature.The goal of this work is to account for how to organize, present and analyse geographic information. We will show how to link from the map to traditional tools such as calculation- and register programs.

Tidigare forskning visar på att en prisvolatilitet existerar på marknaden för återvunnet material och att den många gånger är högre än volatiliteten för dess motsvarande jungfruliga material. Prisvolatilitet på marknaden för återvunnet material verkar vara en av orsakerna till osäkerhet på marknaden vilket i sin tur hämmar investeringar i marknaden, vilket leder till att färre substituerar jungfrulig råvara mot återvunnen råvara. Volatiliteten på återvunnet material kan ses från två olika perspektiv, ett där volatilitet är en orsak av effektiva marknader som styrs av utbud och efterfrågan och ett där volatilitet är en orsak av olika marknadsmisslyckanden. Syftet med denna studie är att mäta förändringen i volatiliteten för återvunnet material, utifrån ett antagande om att volatiliteten minskar över tiden då marknaderna för återvunnet material mognar och blir mer etablerade. Standardavvikelse används som mått för att mäta volatiliteten, där volatiliteten mäts för fem olika material, vilka har olika tidsperioder beroende på material.

Syftet med föreliggande studie är att utifrån nyhetsrapporteringen i Ystads Allehanda och Sydsvenska Dagbladet Snällposten undersöka vems röster som gjordes hörda i den massmediala diskursen kring den asiatiska influensan som grasserade 1957. Utifrån olika teman, som jag vid närläsningen kunde identifiera som återkommande i nyhetstexterna, studerar jag vad man talade om och hur man talade om detta. Jag studerar också vem mottagarna var och om det förmedlas några speciella budskap. Dessutom gör jag en jämförelse av de båda tidningarnas rapportering i egenskap av att SDS kan sägas representera stad medan YA representerar landsbygd. Undersökningen genomförs med utgångspunkt i Faircloughs kritiska diskursanalys och utifrån det teoretiska perspektivet att språket i sig är en handling. Vad som förmedlas via språket är ingen avspegling av verkligheten, utan en konstruktion, som utifrån olika perspektiv och syften skapar ?sanningar?.

A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.

Choosing a new plastic material for a container includes several different steps. In this case,the Finnish company Hackman needed a new type of packaging material for theircutlery- and kitchentool series »Hackman tools«. The project was carried out in cooperationwith the design agency Ytterborn & Fuentes, which has Hackman as a client.Several different demands were put on the material in order to fulfill as many of the clientswishes as possible. The most urgent problem with the existing container was the difficultysfor the customer to clearly see the contents in the container. Because of this problemthe customer tried to open the container in the shop.