An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

This bachelor thesis concerns a region in central Turkey ? Cappadocia - and its need of a sustainable tourism development. A town called Ürgüp is located in the centre of this region, which mainly consist of a rich geographic, cultural and historic access.Our focus in this essay will be concerning Ürgüp and the importance of a sustainable tourism development. Our intensions are to examine what Ürgüp has to offer as a tourist locality and how Ürgüp can maximise its visitors through a sustainable development. We also examine how the locality can be developed in a tourist perspective.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

Stockholm is considered as a tourist destination which has a lot of offers to attract tourists and if it utilizes it water better it can give a wonderful and unique experiences and cold baths may become an image to it.The aim of this study is to shed light on the open-air swimming-baths and shores of Stockholm. Also how to use this advantage as it?s a city based on many islands, the purest water in Europe and this makes Stockholm as a destination a very attractive place for tourism. For a better understanding of our study, we have studied the quality and quantity to see how people began to exploit open-air swimming-baths throughout history everywhere in Europe and specifically of Stockholm city sea shore. We did a study on the history traditions of open-air swimming-baths and how it can be a tourist attraction through books and interviews, scientific articles and our personal observation, so that we can analyze how to develop sustainable tourism in the future and how Stockholm city can make development of opportunities for the future.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

The aim of this study was to examine if the predictions of the herbage quality in the software Grazemore Decision Support System (DSS) gives a reliable ground for milk production in the north of Scandinavia. Pasture samples from one research farm (Umeå) and one organic farm (Nordingrå) was analysed on crude protein and organic matter digestibility. The results were statistically compared to the predicted values. Measured and predicted herbage mass was compared and a control if the predictions of milk production improved if the predicted input were replaced by the values from the analysis, was made. The concentration of crude protein was underestimated by the model on both farms and the relationship between actual and predicted values was poor. Mean Prediction Error (MPE) was 24% and 31% respectively.

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

During the time of membership in The European Union Swedish domestic policy has gone through many changes. A lot more political areas are being influenced by the EU policy. Today every ministry has got some sort of EU office. Swedish politicians are functioning on two arenas, domestic and European. At the same time Swedish membership has gone from being highly discussed to being a state of normality.

This essay has examined how the local community is involved with the tourism development on the San Blas islands and how it effects the destinations development. The method of choice has been a qualitative interview with an operator that offers trips to the destination. Also there has been made a literature study where previous research about the San Blas and the subjects of choice is being presented. During the writing process of this essay it has become obvious to us that the local community (Kuna Yala) is very much involved in everything that concerns the destination. We can thereby establish that the local community of San Blas can be placed on the top step of Arnsteins (1969) ?Ladder of Participation?.

Ystad har under lång tid varit en populär turistdestination för svenska och utländska besökare. Staden med dess omnejd har genom den fina miljön och dess historiska byggnader goda förutsättningar att attrahera turister till regionen. Efter filmatiseringarna av Henning Mankells romaner om kriminalkommissarie Kurt Wallander, som utspelas i Ystad, har antalet turister ökat än mer till regionen. Förhållandet mellan böcker och filmer är en väsentlig del av den turism som uppstår efter en berättelse om en fiktiv karaktär i en existerande miljö. Vi ville följaktligen undersöka film- litteraturturism och dess påverkan på en plats.

Latvia has been an independent state twice, the first time during the years 1918-1940 and the second time from the year 1991 and ahead. During these two periods Latvia has been a destination for tourists. The aim of this study is to describe how Latvia as a destination has developed during the years of independence. One further aim is to compare what Latvia?s tourism industry looked like during the same periods to descry similarities and differences.

Through interaction with customers, companies can acquire knowledge about- and satisfy the needs of customers. In retailing, the ranges of products are standardized and staffing numbers are scarce. How do companies in retailing deal with adaptation towards their customers given the small staffing numbers? The purpose of this study is to examine if and if so, how companies in the Swedish retailing industry are making adaptations towards their customers and also why these adaptations are being made. To answer this purpose, observations in the retailing industry are conducted and the results show that companies adapt to customers? needs.

In this thesis the survival and development of a yearly recurring event will be examined. The purpose of this work is to examine how the festival Stockholm Pride has developed and to find out what underlying factors and conditions that lays behind the development. Also being examined is how the event affects Stockholm city?s tourism industry. To be able to fulfill the purpose of the thesis a qualitative research has been used and two persons with allot of knowledge about Stockholm Pride and Stockholm?s tourism industry has been interviewed.

The focus of this essay is set on a number of processes that affect the challenges of the tourist trade, to be more precise ? an analysis of the attitudes towards tourism and sustainability within this line of business ? from an ethical and moral as well as social view. These issues are examined with reference to the concept of CSR (Corporate Social Responsibility). Thus, acquaintance with theories of social constructivism, post colonialism, globalisation and global civil society is essential in order to understand the analysed material. The essay is mainly based on the outcome of qualitative interviews with various kinds of persons working with CSR related questions.

Many jobs in rural areas have historically been linked to the agricultural sector. The restructuring that has been implemented in agriculture has resulted in a significant reduction in the number of jobs in rural areas. A consequence of this is that many people have moved to cities to earn a living. To maintain a living countryside in Sweden, it is therefore essential to create alternative livehoods in rural areas. An industry that can have a major impact in the future is rural tourism.