Det finns olika system för att hantera och delge information till fastighetsägare och förvaltare. Dessa system är idag oftast pappersbaserade, oftast en pärm med information. Med den digitala tekniken kan man idag göra dessa handlingar mer attraktiva och lättillgängliga. Denna rapport, som är resultatet av mitt examensarbete, belyser vad ett vårdprogram är, hur det upprättas och vad det bör innehålla. Dessutom påvisas i rapporten hur man kan använda moderna IT-verktyg för att förenkla framställningen och redovisningen av vårdprogram.

Uppsatsen behandlar hur två organisationer samarbetar och koordinerar deras kooperativa arbete med hjälp av en artefakt. De två organisationerna är Marinmuseum och Turistbyrån där deras kooperativa arbete handlar om att skapa guidade turer tillsammans. Vi har jobbat mot målgruppernas målsättningar, behov och krav för att hitta det ultimata stödet för deras verksamhet. Syftet är att förmedla förståelse för hur organisationerna idag använder artefakten i deras gemensamma arbete, baserat på intervjuer och observationer. Huvudfrågorna i vår studie har varit: Hur kan vi som utvecklare kan stödja de två olika organisationernas samarbetsmöjligheter och förbättra koordinationen i det fall då de använder denna artefakt, deras pappersbaserade bokningslista som primär informationsplats? Hur kan denna artefakt ersättas utan att tappa dess koordinations och interaktions förmågor samt flexibilitet? Studien har visat att den pappersbaserade artefakten, deras bokningslista, innefattar många positiva egenskaper som vid digitalisering måste tas hänsyn till.

The aim of this study was to explore how six men who run a micro-enterprisewith a maximum of 10 employees handle the balance between work and otherlife. Qualitative approach with semi-structured interviews was conducted and thesample consisted of six men with micro-enterprises of varying ages. The themesused in the interviews were boundless work, roles, boundaries strategies anddemand / control - social support. The results showed that micro- entrepreneursdo not experience any major imbalance between work and other life. The studyrevealed that the division of roles in the home of the elderly respondents was ofthe classical gender character that woman took great responsibility in the home.Among the younger respondents the unpaid work at home was equal divided.Social support was perceived highly by all respondents, and they alsoexperienced a high level of control over the requirements of the job.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database.

HemoCue AB is a multinational corporation targeted on manufacturing point-of-care analysisinstruments for medical treatment. Their main product, the DM 201, is outdated and has bigissues gaining new market shares. For example, no medical treatment center in Sweden usesDM 201 frequently. The project of developing a new instrument to replace it was assignedtwo students at the development engineering program at Halmstad University. The projectalso included integration of the new platform for DM 202 to HemoCue AB:s remainingproducts.The project began by defining the different technical areas concerned.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..

This thesis work is the last part of the Master of Science education inmechanical engineering at KTH, Stockholm.The aim of this project was the development of a Multi-zone modelfor NOxformation in Diesel engines. Because of the stringent emissionlegislations, great effort is made to decrease the fuel consumption and theharmful emissions of internal combustion engines. Computer simulationsplay a decisive role in this context because they substitute the expensiveand time-consuming laboratory tests.The model is based on a multi-zone approach and uses the wellknownExtended Zeldovich Mechanism which gives a relation to calculatethe NO formation rate using the concentration of different gas speciesinvolved in the process.All the most important phenomena involved in the Diesel combustionhave been modelled. A special attention is then paid to the equilibriumconcentration calculation; this is a significant part of the model whichstrongly influences the following steps.A Simulink model has also been developed. This second version isbased on the previous model and it is made especially to allow theconnection with other external softwares, GT-power in this case.

In today?s society computers are getting a much more important role. To get a computer to work as intended it has to be programmed. A computer program is written with programming languages. There is an abundance of programming languages available today and there are many differences and similarities between them. The different languages have their advantages and their disadvantages where some of them are intended for fast performance, some to be cheap on memory usage, and some are developed to be easy to program on. In our thesis we have chosen to compare four of todays most common languages, C, C++, Java and Python.

The company is currently in a stage of improvement and has therefore taken the help of students at School of Engineering, Jonkoping University. The current production is batch, production layout is fixed. A bottleneck is created after the first station which leads to large efficiency loss.  The meaning of this report was to provide a layout suggestion with balanced workstations to a new production line. The conditions were that the production line would be one-way, driven by customers order and meet a demand of 40 products per week.

The Swedish industrial society has left several areas with contaminated soil and water which today is of danger for the environment and human health. One of these areas with contaminated soil and water is the region where the former Glava glassworks operated during 1859 to 1939. The main object in this study has been to study the responsibility for the contaminations according to the Environmental Code. The method used is a qualitative content analysis of relevant literature to answer the following questions:What types of contaminations can be found in the area of Glava glasswork and what health issues can these cause?What kind of activity has been conducted in the area that have caused the contaminations in soil and water?According to law, what are the responsibilities for the contaminations in soil and water at Glava glassworks?The contamination in the region has been confirmed to originate from the glasswork due to the environmental engineering survey made in the area in 2009.

Arbetsuppgifterna på ett fartyg kan innefatta hård fysisk påfrestning samt arbete i mörker, påhög höjd och i slutna utrymmen vilket betyder att sjöfolk måste vara lämpliga för tjänstgöringen.De nationella reglerna för medicinsk lämplighet för sjöfolk skiljer sig trots att deninternationella standarden är densamma för alla. Syftet med denna rapport är att åskådliggöraskillnaderna mellan regelverken om läkarintyg för sjöfolk i de skandinaviska länderna ochundersöka historien bakom de svenska föreskrifterna.Vår slutsats är att det skulle gagna Sverige att återinföra Sjömansläkare, som troligtvis är merkompetenta än en icke specialiserad läkare vad gäller tjänstbarhetsbedömning för sjömän.Systemet med sjömansläkare är fortfarande i bruk och fungerar väl i både Danmark ochNorge.Slutligen sammanfattas rapporten av författarnas egna reflektioner kring ämnet i relation tillresultatet. Förslag till vidare forskning återfinns i slutet..

This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

In Sweden the most common type of road traffic accidents involving passenger cars are single accidents (where only one vehicle is involved). The aim of this thesis is to analyse how these accidents occur, and present recommendations on how to reduce the number of deaths. Data has been collected from the Swedish Transport Administration?s in-depth studies of fatal accidents. Road traffic accidents with fatal outcome that happened on public roads during the years 2007 to 2009 have been studied.