This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

City of Malmö has ambitions for the district Hyllie to become a demonstrative area ofsustainable urban development. As a part of this the following report aims to investigate the potential in using noise barriers combined with photovoltaics along Annetorpsvägen to generate solar electricity. To quantify the losses that shadows from buildings along the roadmight cause, a 3D-model of the area was constructed in SketchUp. This digital model made it possible to simulate shadows and how they change over the year. A reference model of a photovoltaic noise barrier (PVNB) was constructed and used to find the dates on which the solar cells are shadowed depending on building heights and positioning of the barrier.The results show that two lengths with a total distance of 400 meters is appropriate for applying photovoltaic noise barriers.

This thesis examines the effects of electricity visualization in an office building. The subject was investigated through the creation of a web based visualization tool that was made accessible to the about 1500 employees in a large office building. The visualization was available for three weeks. During this period interviews, user studies and observations took place in order to evaluate what, if any, effects the visualization had on the attitudes and behaviors in the office. Electricity use data was collected and analyzed to see if the project had a statistically significant effect on the electricity consumption in the office.The results from the interviews and the data analysis indicate that no reduction in electricity consumption took place, and a number of factors that could increase the chances of success were identified.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

A good power quality can be an important prerequisite to achieve a sustainable society. Scandinavia's electrical system is in many respects superior, and Sweden has a fossil free electricity generation at 97 % and a reliability of electricity distribution at 99.98 %. Meanwhile, the EU has an ambition to expand the electricity market in order to achieve a joint trading business across Europe. This cross-border market will result in a large proportion of fossil energy sources integrated into our electrical system, which also leads to an increased need for renewable electricity production in Sweden. One part of this development is to increase the share of renewable micro generation that is locally or regionally connected to the power grid.

Due to historically low prices for electricity in Sweden, many small-scale hydropowerplants were closed down. A small-scale power plant has more or less the samemaintenance costs as larger plants, but doesn?t generate as much income. Today?sincreasing price for electricity in combination with a desire for renewable energysources makes small-scale hydropower interesting again.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

The report is a master thesis about energy efficient measures for an underground facility Hemsö fortress.Several proposals are evaluated economically.Statistics of the electricity used and measurements of several heat pumps are analyzed to find energysavings potentials.The results indicate that several units of a dehumidification system are responsible for over 70 % of theyearly electricity cost. The air that is being dehumidified by these units can otherwise cause damage ofculturally important interior designs.The proposal with highest profit suggests an alternative method for dehumidification. The cooler in theair handling units in Hemsö fortress have capacity to dehumidify the air. However complementary fansneed to be installed to circulate humid air towards the air handling units. The solution can be implementedin three different locations within the facility.

This thesis aims to contribute to improved functional procurement of photovoltaic systems, PV systems. Functional procurement means that criteria concerning a function are set rather than specifying technical details or products. Possible advantages and difficulties in using functional procurement have been analyzed by interviews, simulations and a case study. Electricity production and surplus production for different scenarios have been simulated via MATLAB. The MATLAB script was also used to generate rules of thumb on feasible solar fraction for six different load profiles; a church, a farm, a car mechanic, an office, an industry and an apartment building.

An energy study has been performed on two blocks in an area called Gävle Strand. The buildings are owned by a tenant-owner?s association called brf Carolina and were built by the company Skanska 2008. The builder as well as brf Carolina are pussled by the fact that electricity use is higher than expected while heating is less. Skanska is also very interested in finding out how much heat recovery from stale exhaust air through a geo-thermal heat pump is contributing to the general heating requirement and energy balance in four out of the ten buildings located on the properties.To find possible answers to the higher electricity use a literature survey on user behaviour was conducted.

The agricultural sector accounts for about 13 percent of the total load of greenhouse gas emissions from Sweden (Swedish Environmental Protection Agency, 2007). The Swedish objective to reduce the greenhouse gas emissions with 40 percentage units to the year of 2020, based upon the year of 1990, might imply stricter regulations for Swedish farmers. A regulation or other forms of economic incentives is probably necessary to reduce the emissions originating from the agricultural sector. This study aims to investigate the economic and managerial impact on two agricultural firms with differing production system given that a constraint on green house gas emissions is introduced. Gases included in this study are carbon dioxide, methane and nitrous oxide.

Lean Production is used by many manufacturing companies. Companies in process industries do not use Lean Production to the same extent today. This is part of the report's issue to explore how Lean Production can be applied to a company in the process industries.The investigated company is a processing company that manufactures various types of foil. The company wishes to streamline its production and has therefore asked the authors to examine if Lean Production can offer the company improvements in their production. Lean Production value stream mapping tool has been selected to identify and analyze the current state of two of its products in production.

To identify the exchange and adaptation that takes place in the business relationship between electricity suppliers and electricity customers and analyze how these factors affect the strength of the relationship.The investigated concepts create synergies. The strength of the business relationship in the current situation is dominated by weak reciprocity in adaptation and an inefficient exchange of information with low frequency..

The assignment given to us by NCC was to compose a degree project based on ground excavations for power cables. The aim of the study was to examine suitable excavation methods depending on different possible terrain conditions. The amount of previously written material within this subject is nearly non- existent and therefore there is a genuine interest by the NCC to receive a compilation of different production methods. The greater part of this study is based upon interviews with several companies active within this area of expertise. The technique of placing the electricity grid beneath ground for safety is today getting more and more common.