The countries in the European Union have agreed to increase their percentage renewable energy sources to 20 %. To reach this goal an increase of biomass production needs to be made. One way of achieving this is by using nonnative species. Poplar in Sweden produces biomass faster than the domestic trees. In the southern parts of Sweden plantations has been made with good results. In the northern parts survival is a problem that needs to be solved before plantations can be made for commercial use.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

Background: Since the coining of the phrase lean production by Womack, Jones and Roos in 1990, this mass production system of Japanese origin has been implemented in a multitude of organizations throughout the world, the results being predominantly positive from a financial point of view. The possibly negative effects of mass production on worker motivation have been discussed since quality of work life became an important political issue in Sweden in the 1970?s. As the popularity of lean service is now increasing, there are still unresolved issues regarding the transferability of a mass production system to the service industry, particularly with regards to the motivation of service employees.Purpose: The purpose of our thesis is to study the lean system of a Swedish bank, SEB Way, from a management- as well as an employee perspective in order to describe how lean may affect the work motivation of service employees.Research procedure: The study is empirically based on observations and interviews on multiple hierarchical levels at SEB. We have conducted a total of 13 interviews with front line employees at SEB, with the central SEB Way team as well as two external lean specialists.Results: The study indicates that SEB Way has little direct influence on the intrinsic work motivation of the SEB front line employees, as work motivation was present prior to the implementation of lean.

The avowed aim in this project was to see how the Swedish egg production is today. My first question was if the Swedish egg producers egg production turn a profit. I have done five after calculation at five different egg producers with different systems from case to case. The difference has been the living system, the fodder and the egg price. They made a report in Uppsala, Sweden (Hoffman & Andersson, 1996), where the look forward to a Swedish cage ban and made calculations after that coming ban. After that they lift the Swedish ban of cages and the egg producers could invest in new cages who called the decorated cage.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The aim of this study was to investigate the production of knowledge that can emerge in the use of Practice Research by Mirror method. This by finding out what it is in the practical work that leads to the production of knowledge and how knowledge production takes form. The empirical data that form the basis for this study is recorded group within the Mirror method discussions and a focus group interview with social workers who participated in the discussions. Those who have participated are social workers with experience from working with financial aid support and only real cases have been used in the discussions. The results have been analyzed according to Lipsky's theory of street-level bureaucracy and their discretion and Fook and Gardner´s theory of critical reflection.

Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

There's no doubt today that mankind has contributed to the changing climate byher use of fossil fuels. This must change in the nearby future. The Europeanleaders are expressing concern that renewable energy sources are not beingused to their full potential. The 2001/77/EC Directive on Electricity Productionfrom Renewable Energy Sources was accepted in 2001 to encourage thedevelopment of energy production from renewable sources, which isconsidered a step towards the fulfillment of the goal of the Union, that 12% ofthe gross energy consumption should come from renewable energy sources bythe year 2010.The objective of this thesis is to illuminate the common legislation of the EUregarding renewable energy with regard to goal fulfillment, judicial quality,conflicts with other goals of the EU and other faults. The objective is reachedby a hermeneutic study in which interpretation of written text is the mainmethod.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Background: Mass customization has been identified as a competitive business strategy by both companies and academics because of its ability to incorporate the voice of the customer into companies? products and services. Although mass customization may sound appealing, the strategic concept is still developing and firms adopting this business strategy face several challenges. Production concerns are of high relevance since mass customization implies a high level of customer involvement in the product design. Since the areas are closely linked it is reasonable to ask how a mass customization strategy affects production concerns.

In several countries that have been early in the development of wind farms, there is today a second hand market for the used wind turbines. The European Union (EU) has established a waste hierarchy in order to minimize throwaway mentality. The second hand market is a part of this as the steps are to minimize, reuse, recycle, extract energy and landfill.In order to promote the development of renewable energy, there are energy certificates for the producers that provide it, wind power being one type of renewable energy. After 15 years the energy certificates for a specific wind turbine are no longer paid, and after that there are several different scenarios for the wind turbine. The scenarios investigated in this bachelor?s thesis are export of the wind turbine to countries that are not as far along as Sweden in their development towards renewable energy, selling in Sweden to individuals, and recycling of the wind turbine, as it mostly consists of metals and therefore is recyclable.

Wind power is an energy source that is becoming increasingly popular in Sweden and around the world. The establishment of large wind farms supply and contributes to energy production within grid in search of a more sustainable energy production. Wind power is becoming more popular and opens up new areas of implementation. More cities are starting to use small-scale urban wind power, everything from full-scale work for a little less work adapted to the villas. Sweden has high goals regarding the production of green electricity and the work which deals with the conditions Sweden plays in achieving those goals.

BakgrundSvensk sjukvård har idag bland de bästa behandlingsresultaten i Europa, men trots det förs diskussionen om sjukvården ofta i negativa ordalag. I ett försök att förbättra synen på verksamheten och bli mer effektiva har sjukvården i Sverige ofta använt sig av kommersiellamodeller, modellerna har dock behövt anpassas för att fungera i sjukvårdens miljö. En av de senaste kommersiella modellerna som nu införs i den svenska sjukvården är Lean Healthcare,som är sjukvårdens version av Toyotas produktionsfilosofi Lean Production. En stor del avtidigare forskning på området har behandlat Lean Production men lite finns att tillgå som handlar om Lean Healthcare. Den här studien är ett bidrag till att utöka kunskapen om Lean Healthcare i Sverige.SyfteSyftet med den här studien är att beskriva hur Lean-filosofin fungerar i den svenska sjukvården samt att göra en jämförelse mellan Lean Production och andra kommersiella modeller som tidigare har införts i den svenska sjukvården.GenomförandeMed hjälp av intervjuer på tre svenska sjukvårdsenheter har en fallstudie med fokus på Lean Production och Lean Healthcare genomförts.ResultatResultatet av studien visar att Lean Healthcare, i likhet med tidigare modeller, har krävt anpassningar för att fungera i sjukvårdens kontext.

Denna uppsats syfte är att undersöka hur elever bygger innehåll i sina texter utifrån faktorerna genre och programtillhörighet. Materialet för undersökningen är 38 elevtexter skrivna under nationella provet i svenska. 19 texter är skrivna av elever på studieförberedande program och 19 är skrivna av elever på yrkesförberedande program. Dessa texter har en jämn fördelning av genrerna argumenterande texter och recensioner. Undersökningen utgår ifrån byggandet av texters innehåll utifrån makro- och mikroteman.