Sheep production is the only animal production in Sweden that is increasing. Therefore,increasing knowledge of the production is of great interest. In order to run a viable sheepproduction, producers needs to be successful in the breeding of the animals and achievean economic surplus in the end. Lambs that are born healthy and vital have greaterconditions to perform high lamb weight gains and thus a successful production. Thereare many factors affect the survival, birth weight and early weight gain of the new bornlamb.

Energy is an important issue in the current world which significantly affects sustainability and development. Energy generation and use are major sources of CO2 emissions which is one of the most important driving factors in global climate changes. The amount of energy used in house hold section can lead to estimation of the amount of CO2 emitted within this section which subsequently would be a ground to better management and maintaining a sustainable society. This study which is a bachelor?s project in sustainable energy, deals with estimation of CO2 emission from different types of residential houses in Sweden. An extensive literature review on energy use in Sweden by different residential sectors has been conducted.

How affected are the sugar production in Mozambique and Tanzania by EU sugar regime? What does the EU sugar reform constitute in these countries?Using theories regarding free trade and anti-free trade, I am able to answer these questions. The aim of this paper is to study how the various sugar agreements with EU affect the sugar production in Mozambique and Tanzania. Therefore I am using a method called a most similar system design in this comparative case study. The conclusion is that the EU sugar regime is the main reason to how the sugar productions in developing countries are.

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

FYROM has a long tradition of producing wine. Wine production in FYROM is one of the greatest contributors of the agricultural share of their GDP. The aim of the thesis is to see if the wine production in FYROM has a comparative advantage compared to other countries that produce wine and if FYROM is able to sustain the advantage in the future. The countries chosen for comparison are Bulgaria, Croatia, France and Italy. The methods used in the thesis are the Balassa Index and Porter?s Diamond of National Advantage.

The Swedish processor Findus contracts approximately 500 pea producers annually to secure the company?s supply of green peas for human consumption. A production contract, which has had roughly the same design for decades, regulates the relation between Findus and the pea producers. Agriculture is typically a risky business. The main sources of risk in agricultural production are production risk and price risk.

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

Energy-wise houses in Järinge - technical follow-up The company JM built energy-efficient houses in Tensta in Stockholm. They have built a total of 16 houses divided into two parts of A-houses and B-houses. The buildings are an attempt by JM to minimize energy-use of the buildings without affecting the comfort and living standards. The project aims to examine the data for the 16 houses on the basis of data and produce a report showing how the buildings worked through a technical perspective. JM approximates that the purchased energy will not be higher than 95 kWh/m2 per year.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

Det fenomen som varit föremål för den här studien är psykosocial arbetsmiljö. Fenomenet har undersökts med inriktning på tillverkningsindustrin och organisationsformen Lean production. Studien syftar till att erhålla en djupare förståelse av hur medarbetarna i den här specifika kontexten upplever den psykosociala arbetsmiljön. De frågeställningar som studien ämnar besvara är:-Vad innebär en god psykosocial arbetsmiljö för medarbetarna i organisationen? -Hur upplever medarbetarna den psykosociala arbetsmiljön i organisationen? Studien genomfördes med ett induktivt förhållningssätt.

The community Vessigebro, in Falkenberg and its surrounding areas housing one percent of all dairy cattle and two percent of all pigs in Sweden. This means that there is a large amount of manure as a basis for producing biogas in the area. A number of farmers have therefore formed a cooperative named Vessigebro biogas and started the project Green Vessigebro, with the goal of creating the conditions for a more profitable and more sustainable agriculture production.The study deals with the conditions and sale opportunities of the feasibility study Green Vessigebro. The study has looked at the work that was previously carried out for the biogas that could be produced on the farms in Vessigebro, The main pipeline for natural gas on the Swedish west coast and its operators, the Swedish Competition Act , Electricity Act , Natural Gas Act, the District Heating Act , Sustainability Act , previously proposed measures, municipality interest in biogas from Vessigebro , possible collaborations, possible sale opportunities and perform calculations with data from the municipality Ljungby for a suggested transportation of biogas between Vessigebro and Ljungby.The study shows that there are several interesting sale opportunities for biogas from Vessigebro. The production and use of biogas in Sweden is increasing and the trend seems set to continue.

Osseointegrated titanium implants have become a commonly used method in edentulous jaws and today there are success rates in the magnitude of 82 % in the lower jaw and 98 % in the upper. During first year after implantation a fully normal marginal bone loss of 1-2 mm occurs. If the bone loss continues there is a risk of implant failure. High tensions in bone and inflammation caused by bacteria are possible reasons for this problem. It has been shown that a leakage of bacterias occurs between the parts of the implant and there are theories that this has effects on the marginal bone loss. The aim of this thesis has been to increase the knowledge about microbial leakage with help of in vitro tests and virtual simulations.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

The challenges facing low voltage grids are rising as an increasing number of domestic houses transition from fossil fueled heating to electricity based heating. Several environmental goals and visions have the same transition from fossil based power to electricity based power in mind for the transportation sector. One of the most important tools for this transformation is widely regarded to be the electric vehicle. With the demands of the electric vehicle pressuring the power grid, several questions arise regarding the growth of the electric vehicle market and what repercussions it may have on the grid. This paper focuses on a typical low voltage grid in southern Sweden and what effects a growing electric vehicle market may have on it. Through computer-assisted simulations based on several future scenarios regarding the EV market, this paper finds that few modifications and reinforcements are needed on this particular grid within the next 10 to 15 years.