AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

 In this essay the aim was to investigate how the EU is trying to function as a democracy promoter in three particular countries, the so called candidate-countries Croatia, Macedonia and Turkey. The aim was also to analyze if there exist any differences in how the EU functions in these countries as a democracy promoter with a focus on how acts of democracy promotion is taken place. In order to fulfil the purpose of the essay two questions were addressed, how does the EU perform in promoting democracy in the three candidate-countries Croatia, Macedonia and Turkey? And also, is it possible to identify any differences in how the EU functions as a democracy promoter in those three countries?The method used to fulfil purpose and answering research-questions was qualitative text-analysis.  The results of the study were that the EU does perform in a number of ways to promote democracy in the three countries. The main differences are that the EU is using primarily political tools in Croatia and Macedonia which are channelized top-down and economic tools in Turkey channelized mainly top-down to promote democracy.

Test is an area in system development. Test can be performed manually or automated. Test activities can be supported by Word documents and Excel sheets for documenting and executing test cases and as well for follow up, but there are also new test tools designed to support and facilitate the testing process and the activities of the test. This study has described manual test and identified strengths and weaknesses of manual testing with a testing tool called Microsoft Test Manager (MTM) and of manual testing using test cases and test log templates developed by the testers at Sogeti. The result that emerged from the problem and strength analysis and the analysis of literature studies and firsthand experiences (in terms of creating, documenting and executing test cases) addresses the issue of the following weaknesses and strengths.

Background: Patients postoperative pain is often underestimated. Untreated or undertreated pain decreases the chance of optimal recovery after surgery. Pain assessment is an important factor of efficient pain relief. Aim: The aim of the literature study was to describe factors of importance for nurses´ assessment of postoperative pain in patients. Method: A literature study was done where qualitative and one quantitative article was reviewed.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

This thesis investigates lacks in today?s use of the ERP-system Mapaz Affärssystem inthe production planning at Solna Pressgjuteri, and possible improvements. Today thedates calculated by the program to plan the orders are inaccurate and the ordersequence is not optimal, and therefore continuous manual corrections are needed.The approach was to study the program Mapaz to understand how it works, andidentify available parameters for input and output in the different tools offered in theprogram. By studying old lists of planned orders and relevant parameters in Mapaz forindividual orders, production groups, products and operations, the connectionbetween input and output parameters could be understood.Participating in planning meetings and discussions with the company behind theERP-system identified the current usage, desideratum and possibilities with theavailable tools. These were then matched to describe the reasons to the insufficientplanning and form possible actions for improvement.The work has showed poor understanding for the ERP-system and its functions, assome tools intended to assist the planning were not used, and some even usedincorrectly.

I denna uppsats beskrivs och implementeras tre alternativa metoder för att skatta kovariansen mellan finansiella tillgångar. De utvärderas sinsemellan och jämförs med stickprovskovariansen. Utvärderingsmodellen innebär simulering av en aktiv portföljförvaltare i en verklighetstrogen miljö. Då kovariansen mellan finansiella tillgångar beräknas med stickprovsskattning blir skattningsfelet stort. Detta fel, eller brus, försämrar portföljförvaltares resultat och alternativa metoder eftersöks.

This report is the result of a thesis carried out during the spring of 2010 at Sandvik Coromant in Gimo. The purpose of this thesis has been to make an inventory and mapping of information used by flow groups that are most relevant for the day-to-day work. This mapping will then form the basis for information supplied by an automated system.The project consisted of:Identifying how the information is supplied today.Inquiring into the needs of an automated system.Which needs of information that will be provided by the system.Data collection occurred in two ways, both through observations and interviews. Observations of the participants were carried out early in the thesis, where the aim was to create a picture of the problem, and gradually develop a basis for the actual interview study. At each observation, an unstructured observation was used, which means that all activity was recorded.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.

Leaders have many tools in their toolbox when it comes to managing their firms, assuring that they are moving in the right direction. One of these tools is vision. Vision can be a powerful tool for steering a company. But to be able to use it fully, you must also understand how vision is best conveyed to employees and followers. If you understand the vision as a tool, you can fully utilize it.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time.