Issue of study: The development of technology and society is closely linked. Mutual dependency and complex interrelationships make straightforward analysis of issues regarding the future of technology and society hard to perform. Therefore, the study addresses the question of how organizations should describe and analyze the interactions of technology and society in order to gain a better understanding of what the future may bring. Purpose: ? To develop a method for analysis of the future course of issues regarding technology and society in interaction.? To apply and test the developed method through a case study, where it is used to analyze the future of the Russian fuel market.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

This study explores Environmental Storytelling techniques and whether these can beused in combination with each other to lead a player through a game scene in aspecific pattern, affect the player?s narrative and exploratory view and explorewhether Self-paced Exploration can be combined with these techniques.It is a qualitative study conducted by six gaming sessions with accompanyinginterviews in which six people get to play one of three versions of the same gamescene. The only differences between the scenes are the different guidance techniquesused. The informants' movement patterns are identified and interviews recorded byaudio, as well as screen recording. The results shows that Environmental Storytellingtechniques can very well be used to control the player's exploration patterns, bothnarratively and navigation purposes and Self-paced Exploration can be utilized to agreater efficiency in combination with these..

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

This Master?s thesis explores three contemporary Swedish poets? ? Lars Mikael Raattamaa, Anna Hallberg and Johan Jönson ? understanding of their work as a political activity. By using Jonathan Culler?s theory on literary competence and literary conventions as a theoretical tool for an idea analysis, the three poets' arguments for or against certain literary techniques, and their ideas about readers and reading, are explored and discussed. In what ways are established literary methods questioned by the three poets? In what ways are established theories on readers and reading questioned? In what way can their poetic work be regarded as political? As a background, the debate about poetry in Swedish newspapers and literary magazines is presented, as well as the common focus on readers and reading in social sciences and in humanities and arts.

This report describes the development process of a pipe clamp used on exhaust system for cars. It is made based on the manufacturers desire to improve and make the clamp easier to manufacture and to reduce its price to their customers. This should be done either by manufacturing the clamp in one piece without an expensive and work intensive welding process, or by generating ideas of how to develop a brand new type of clamp. Investigating the market for similar products was done to eliminate intrusion of other manufacturers? patents but also to generate ideas.

The aim is to develop a new decision-making model for credit-loans. The model will be specific for credit applicants of the OKQ8 bank, becauseit is based on data of earlier applicants of credit from the client (the bank). The final model is, in effect, functional enough to use informationabout a new applicant as input, and predict the outcome to either the good risk group or the bad risk group based on the applicant?s properties.The prediction may then lay the foundation for the decision to grant or deny credit loan.Because of the skewed distribution in the response variable, different sampling techniques are evaluated. These include oversampling with SMOTE, random undersampling and pure oversampling in the form of scalar weighting of the minority class.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The aim of this study is to increase knowledge about how a group of newly graduated social workers reflect on the practical daily work and their positions working with clients who are in need of social and/or economic resources. More precisely the purpose is to find out how these seven newly graduated social workers viewed working with clients during theoretical and practical studies. The aim is to analyze which techniques and methods could be seen in these narratives. Furthermore the aim was to find out if and how these seven social workers reflected on the power relation between social worker and client.The material of this study consists of seven semi-structured interviews. Throughout gathering the data and analyzing it, the qualitative method in form of narrative approach was used.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Bygghantverk, 27 hp, 2012.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.

This Master Thesis is a product development project that has been carried out in cooperation withLappset Sweden AB.The purpose has been to develop a group of products suited for parks andtraditional playground locations. The specific target area has been courtyards of newly builtresidential areas. (These pieces of open land resemble glades that can be found in the forest,which in Swedish is called ?gläntan? and has given name to the product family). Therefore thedesign should match contemporary architecture.