Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly Manual but can in some rare cases be automatic.

Two haematological instruments intended for small animal clinic use were evaluated at the Department of Clinical Chemistry, Swedish University of Agricultural Sciences (SLU), Uppsala, Sweden. The QBC-V and Vet abc were compared to a reference instrument, the Cell-Dyn 3500. Fresh blood samples were obtained from canine and feline patients from the University Veterinary Hospital, SLU. The QBC-V was used for 111 canine samples and 78 canine blood samples were analysed with Vet abc. From cats, 23 samples were analysed with both instruments.

Syftet med examensarbetet är att främja den hållbara utvecklingen i anläggningssektorn. Målet med rapporten är att visa hur miljöklassningssystemet CEEQUAL kan förbättras samt hur användningen kan främja hållbar utveckling i mark och anläggningsprojekt i Sverige. CEEQUAL är ett miljöklassningssystem inom infrastruktur och anläggning som har utvecklats i Storbritannien av Institution of Civil Engineers. I examensarbetet har följande frågeställningar undersökts: Hur fungerar CEEQUAL i praktiken? Vad är den svenska erfarenheten från användningen av CEEQUAL? Hur kan anläggningssektorn förbättra miljö/hållbarhetsarbetet genom miljöklassning med CEEQUAL? Hur kan man förbättra miljöklassningssystemet CEEQUAL? Frågorna har besvarats genom metoderna litteraturstudie och dokumentanalys men även genom intervjuer med olika aktörer inom anläggningsbranschen. Denna rapport innehåller en kort sammanfattning av vad hållbar utveckling betyder och en fördjupning inom miljöklasscertifieringssystemet CEEQUAL samt dess användning inom anläggnings- och infrastrukturprojekt. En jämförelse mellan CEEQUAL, de 16 nationella miljömålen och Kretsloppsrådets mål har också utförts för att se om de behandlar samma miljöområden. En certifiering sker i flera olika steg. En certifiering genomförs av en utbildad assessor som bedömer och ger poäng på svaren av frågorna som återfinns i CEEQUAL:s Manual.

This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often Manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

Atlas Copco saknar i dag tydliga riktlinjer för hur man skall bryta ner sina reservdelar. Detta har medfört att antalet reservdelar som erbjuds till en komponent, den så kallade köpnivån, skiljer markant mellan olika maskiner och även inom en maskin. Syftet med examensarbetet var att hitta en modell för hur man skall sätta köpnivåer på reservdelar utifrån ett kund- och lönsamhetsperspektiv. Författarna har valt att dela upp arbete i fyra faser. Undersökningen har till stor del bestått av intervjuer och workshops med en stor mängd intressenter i Sverige, Kanada och USA. Respondenterna består av kunder, leverantörer, och personer inom Atlas Copco som direkt berörs av vilken köpnivå företaget erbjuder.

Atlas Copco saknar i dag tydliga riktlinjer för hur man skall bryta ner sina reservdelar. Detta har medfört att antalet reservdelar som erbjuds till en komponent, den så kallade köpnivån, skiljer markant mellan olika maskiner och även inom en maskin. Syftet med examensarbetet var att hitta en modell för hur man skall sätta köpnivåer på reservdelar utifrån ett kund- och lönsamhetsperspektiv. Författarna har valt att dela upp arbete i fyra faser. Undersökningen har till stor del bestått av intervjuer och workshops med en stor mängd intressenter i Sverige, Kanada och USA.

Idag används många olika byggsystem, prefabricerade enheter som tillverkas i fabrik enligt färdigställda ritningar. Uppförandet av byggnaderna går snabbare på byggplatsen och därmed spara tid och pengar. Det kommer hela tiden nya byggsystem och i dagsläget finns ett intresse kring de byggsystem som utvecklas i trä, främst på grund av enkel bygglogistik beroende på låg vikt och även ur miljösynpunkt. När ett nytt byggsystem tas fram undersöks först och främst vilka tekniska byggegenskaper det har. Bland annat identifieras systemets bärförmåga, ljudklass, brandmotstånd och miljöpåverkan.

AbstractBackground: Cancer is a leading cause of death worldwide and accounted for 7.6 million deaths, about 13% of all deaths, in 2008. Several factors can affect patients' quality of life such as physical and psychological symptoms, relationship to people around and the environment. In palliative care professionals need to have good knowledge in order to improve patient quality of life and to give them as good a life as possible in the final stages of life.Aim: The purpose of this overview study is to describe the experiences of quality of life in patients with incurable cancer.Method: We conducted an overview study that was based on ten scientific articles. All articles are qualitative studies, from the year 1995 - 2011, and are from Sweden, Finland, UK, Canada and the USA. Qualitative analysis was used to group the various themes and subthemes for overview study purpose.

Namibia, southern Africa, suffers from an energy shortage and is therefore facing severalchallenging problems. The use of firewood as fuel for cooking is common in the whole countryand has negative consequences for health and the environment. This work have focused ondeveloping a solar baking oven, calledSunbaker, adapted for Namibian families needs forbaking. The development was based on classic solar cooking limitations, specific needs forNamibia and to have a feasible manufacturability.The project started with a theoretical study in Sweden where different solar cookers, informationregarding Namibia, technical aspects and end user aspects were studied. To assess the need for asolar baking oven aMinor Field Study took place in Namibia during eight weeks in July toSeptember 2009 and resulted in a product design specification.

Robotic milking in Automatic Milking systems (AMS) is proposed to reduce Manual labour and at the same time increase milk yield by increasing milking frequency. In order to increase milking frequency, it is essential to have well-functioning cow traffic. Investing in an AMS is a great capital investment for the farmer, thus it is of major importance to ensure maximal AMS capacity. This study investigated the effect of the traffic systems Feed First? and Free cow traffic with and without waiting area (WA) on cow performance and AMS capacity.

Teachers and special education teachers play a vital role in the creation of a study environment that fosters productivity in students. The current study aims to further expand the knowledge regarding teacher?s perception of common work with developing an optimal study environment within the classroom and the educational institution. In order to achieve this, qualitative interviews have been performed and study results analyzed according Nilholm´s model of the three different perspectives on special education: The critical perspective, the compensatory perspective and the dilemma perspective.The study results show that the concept of order and study environment is not clearly defined among the interviewees. However, the concept appears to presuppose the teacher?s responsibility to create the sense of security and effective study environment to those students who express the wish to educate themselves (Children make the things right only if they have been shown the correct way to do it).

The overall purpose of this master essay is to investigate whether there is an interest among people near retirement to contribute with their knowledge and experience after they reach the defined retirement age. Furthermore, I would like to investigate if they want to continue with their old jobs, full time/part time or to do something else, which is beneficial to the society. I also want to find out how the older people view themselves to continuing to work. Also which types of social and structural barriers that might exist for them and why. The aim is also to investigate what types of knowledge and experience they believe could be used in the future community.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

Från och med 1 januari 2007 gäller nya och förenklade redovisningsregler som stadgar att alla verksamheter ska avsluta sina räkenskaper med ett årsbokslut eller en årsredovisning. Mindre företag har dessutom möjligheten att använda ett förenklat årsbokslut. För enskilda näringsidkare finns en vägledning utgiven av Bokföringsnämnden i syfte att ge en överskådlig beskrivning av de nya reglerna och deras tillämpning. En enskild näringsidkare som upprättar ett förenklat årsbokslut ska använda sig uteslutande av reglerna i denna vägledning.Anledningen till att reglerna ändrades var enligt propositionen att det tidigare regelverket var komplicerat och svårt att överblicka. De nya reglerna i bokföringslagen som stadgar att bokslutsskyldighet nu gäller alla bokföringsskyldiga, syftar till att förenkla redovisningen för de allra minsta verksamheterna.