Denna rapport redogör för skapandet av varumärket Deco Retro. Samt den tillhörandedesignprocessen för att skapa en visuell identitet och profil för varumärket. VarumärketDeco Retro togs fram som ett undervarumärke till Kitsch Sweden AB som behövde ettvarumärke som passade deras nuvarande och framtida produkter. Deco Retro ska bidra meden stärkt identitet och värde för de produkter som ska säljas under varumärket. Designarbetetkring varumärket strävade framförallt efter att kommunicera den idé, identitet och de värdensom under projektet tagits fram för varumärket, samtidigt som det ska ha bidragit med enestetiskt tilltalande grafisk design.

The number of parties in the Swedish parliament has increased from five to eight during the last twenty years. The political agenda is still based on a two-block system with the consequences that the number of parties in each block has increased. To be represented in the parliament, a party needs at least four per cent of the total votes in the election. If only one party fails to achieve that, the whole block will lose the election to the other block. This could encourage voters to vote tactically for the small parties in the block to ensure that the block wins the election.

The definition of an expectation gap is, when the local municipal politician and the audited apprehensions and expectations gets apart about what auditors are going to work with and what they are going to accomplish.Svenska Kommunförbundet writes in their publication Fullmäktige och revisionen (2004) that the communication between the auditors and the audited is important so the final result becomes great. Apart from the communication, the recurring information about auditing is important to increase the knowledge and understanding. Are there expectations on what the auditors are going to review and discover among the audited, when there probably are expectations from the inhabitants on the auditing. This leads us to our purpose of our essay which is to investigate and describe if there exist an expectation gap between the auditors and the social welfare boards in the primary municipality. The method we used to collect our data was a guided telephone interview with 66 persons.

Two different methods for measuring biogas production were used, gas meter and gasbags. The gas meters were electronic and counted each time a certain gasvolume passed through them. The gasbags collected the gas that hade passed through the gas meter until a manual measuring could be done. The two different methods gave the same result for a volume at three liters but for a volume around 0,2 liters they did not. Accuracy and precision for the gasbags was more exact than for the gas meters even if the method was difficult with a lot of different elements that could affect the result.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

Hjälpmedel är ofta en förutsättning för att personer med funktionshinder ska klara av sinaolika dagliga aktiviteter.Syftet med uppsatsen är att genomföra en jämförelse mellan Örebro län, Västmanland och Södermanland hur tillfredsställda brukarna är med sitt hjälpmedel och service.Resultatet visaratt majoriteten av brukare i de tre olika länen är tillfredställda med sitt hjälpmedel och service.Det högsta medelvärdet visar att brukare i Örebro län var mest tillfredställda med variabelneffektivitet och varaktighet, brukare i Västmanland var även de mest tillfredställda medvaraktighet. I Södermanland visade sig att brukare var mest tillfredsställda med variabelnanvändbarhet..

This study investigates augmented reality using third person perspective and what precision can be achieved by using this method. There have been prior studies in regards to precision using augmented reality, however studies using third person perspective is scarce. This study presents a solution using a static camera capturing the user as well as the plane to augment from behind. This augmented image is then transferred to a handheld device that is held by the user. Using this method the user will be free to manipulate and work with the plane without removing the device that captures the scene, a common problem when using visual reference markers in augmented reality.

This study investigates if and how grammar instructions and exercises in Spanish textbooks have evolved during the last thirty years. More specifically it focuses on how the grammar is presented (explicit instruction) and on the nature of the exercises (input, production and interaction). The method for investigating these things is firstly an analysis of the explicit instruction, and secondly a quantitative study of the exercises. The number of textbooks analyzed in this study is four and only the chapters that focus on teaching the preterite are included in the analysis. The result shows a tendency towards direct explicit instruction and controlled production practice.

Föreliggande arbete undersöker metodmässig interoperabilitet genom att jämföra de kommande svenska reglementena Reglemente för Markoperationer och Markstridsreglemente 6 ? Bataljon och deras överensstämmelse med den doktrin som nyttjas av International Security Assistance Force (ISAF) i Afghanistan. Undersökningen syftar till att lämna ett bidrag till den svenska reglementsutvecklingen.Arbetet visar att det finns en överensstämmelse avseende grundbudskapet att lokalbefolkningen behöver skyddas och att man måste förstå deras situation. Det föreligger en låg grad av överensstämmelse avseende metoder för att skydda befolkningen.Författaren lämnar tre rekommendationer:1. Omarbeta beskrivningen av stabiliserande metoder2.

Syftet med min forskning var att undersöka den rådande informationsproblematiken som Sepab Fordonsprodukter hade med sina informationsmaterial och den underliggande orsaken till detta. Utifrån min empiri och mina resultat av intervjuerna har jag sedan utvecklat ett nytt förslag på informationsmaterial. Jag har under hela arbetets gång fokuserat på målgruppsanpassning tillsammans med ämnet informationsdesign, vilket enligt mig går hand i hand.Jag har arbetat utifrån kvalitativa metoder med hermeneutiken som inspirationskälla och informationsdesignsmässiga principer för att åstadkomma detta. Mina resultat visade att det fanns ett flertal faktorer i det utgivna informationsmaterialet som var i behov av förbättring. Den slutgiltiga produkten blev ett nytt informationsmaterial till Sepabs nya produkt där jag har tillämpat dessa teorier..

The purpose of this paper is to find out if technology within pedagogy can help pupils with dyslexiaperform on the same level as their peers without using compensatory aid. Is it possible to replacethe compensatory aids with the technology in question? Can the same technology also be used tosupport other pupils as well and in turn removing the stigma of needing compensatory aid?To learn the answers to these questions I have done a qualitative text analysis. This analysis focuson technology in the form of podcasts and Web 2.0 based teaching platforms. The analysis alsofocus on pupils with dyslexia and what kind of help compensatory aids can be.

Electrooculogram (EOG) data was used to develop, adjust and validate a method for drowsiness detection in drivers. The drowsiness detection was based on changes in blink behaviour and classification was made on a four graded scale. The purpose was to detect early signs of drowsiness in order to warn a driver. MATLAB was used for implementation. For adjustment and validatation, two different reference measures were used; driver reported ratings of drowsiness and an electroencephalogram (EEG) based scoring scale.

Idag används BIM, byggnadsinformationsmodellering, i fler och fler nybyggnadsprojekt och det finns mängder med information att inhämta om detta både i tryckta tidskrifter och på internet. En obesvarad fråga är dock hur arbetsgången ser ut när BIM ska användas i ombyggnadsprojekt. Informationen som går att finna om detta är begränsad trots att ombyggnadsprojekt utgör en betydande del av byggverksamheten, såväl i Sverige som internationellt. Målet med denna rapport är därför att undersöka hur ombyggnadsprojekt i dagsläget utförs med BIM som arbetssätt. Processen att arbeta med BIM har undersökts i detalj för att klargöra hur den ser ut idag och för att identifiera den problematik som just ombyggnationer medför.

In this essay I discuss and analyse if we can witness any signs on regional dimension due to regional representation from our elected representatives in the five constituencies Malmö, Blekinge, Norrbotten, Uppsala and Stockholm. Two seperate terms of office between 1991-94 and 1998-2002 has been compared. In political science there has been much debate about the relationship between voters and their elected. By measuring each and everyone elected representatives in the work of produce introduced bills towards their own constitiency during both terms I have tried to see if there is an occurence of a regional dimension.The theory that´s been applied is based on geographical representation where one might aspect that central metropolitan areas and peripheral regions is somewhat over-represented in legislatures. By using a method of comparison between the five chosen constituencies and theirs elected representatives I have come the the conclusion that there is a weak tendency that this might be the case seen to a regional dimension perspective..