This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

This thesis investigates lacks in today?s use of the ERP-system Mapaz Affärssystem inthe production planning at Solna Pressgjuteri, and possible improvements. Today thedates calculated by the program to plan the orders are inaccurate and the ordersequence is not optimal, and therefore continuous manual corrections are needed.The approach was to study the program Mapaz to understand how it works, andidentify available parameters for input and output in the different tools offered in theprogram. By studying old lists of planned orders and relevant parameters in Mapaz forindividual orders, production groups, products and operations, the connectionbetween input and output parameters could be understood.Participating in planning meetings and discussions with the company behind theERP-system identified the current usage, desideratum and possibilities with theavailable tools. These were then matched to describe the reasons to the insufficientplanning and form possible actions for improvement.The work has showed poor understanding for the ERP-system and its functions, assome tools intended to assist the planning were not used, and some even usedincorrectly.

There is no further training in management in teacher education programs, which can create uncertainty among teachers in terms of management. According to the curriculum, the teacher should base it on a democratic approach, but how does it look in real life? The purpose has been to investigate how practicing teachers perceived management and their own leadership style, whether they made conscious choices and if so, whether they then had any purpose in their leadership style. Teachers' views of a good leader and how much influence students have on the teaching, enter into these issues.The survey is based on a qualitative research approach, based on interviews with four active teachers. Although observations were made they did not play any major role in this investigation.

The first version of the Swedish Code of Corporate Governance was published year 2004, by the code group, Kollegiet, after a mission from the Swedish government. The Code consists a collection of rules and standards about corporate governance and internal control, and the first version was intended to include incorporated limited companies on Stockholm?s alpha stocks, and also listed companies with a stock market value over three thousand million Swedish kronor. Now a few years have passed, and in July 2008 a new, revised version of the Code was implemented, now simplified and shorted, with the intention to include all joint-stock companies in Sweden. The Code contains rules about for example ownership, management commitments, annual stockholders meetings, and the accountant. This study intends to, with a qualitative research approach and an inductive reasoning, through studies of empirics in the subject, review whether the accountant?s profession has been influenced by the Code.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

I denna studie har insamling av referensdata över språkförståelse hos treåringar med typisk språkutveckling genomförts. Till detta har bedömningsmaterialet Sofialådan (Westerlund & Öfverholm-Engström, 1995) använts. Sofialådan bygger som flera andra språkförståelsematerial på den s.k. act-outmetoden där man låter barnet agera med föremål efter en given instruktion. Med hjälp av föremålen i Sofialådan bedöms barnets förmåga att identifiera grundfärger och storleksbegrepp, kategorisera, flytta föremålenligt olika prepositionsanvisningar samt att följa flerledade instruktioner.

Background: Diabetes mellitus is one of today's major public health problems, affecting up to 347 million people worldwide. Several studies have shown a correlation between hearing loss and diabetes mellitus. However, it is still unclear whether this correlation differs between type 1-diabetes and type 2-diabetes.Purpose: The purpose of this study is to investigate whether there is any difference in prevalence of hearing loss in type 1-diabetics versus type 2-diabetics.Method: A meta-analysis was performed based on ten studies that were identified through the database PubMed and through manual searching of references. Odds ratios for the risk of developing hearing loss were calculated in each study. Pooled odds ratios were calculated using a random effects model.Results: Pooled odds ratios indicates that both type 1-diabetics and type 2-diabetics are more likely to develope hearing loss compared to non-diabetic controls.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

This Master's thesis aims to investigate the reference interview using the discourse analytical method discourse psychology. The reference interview has been studied thoroughly, and its importance has been proven repeatedly within the field of Library and Information Science (LIS). However, it has never been studied from a discourse analytical point of view before.The material for our study was gathered at Malmö public library, and consists of 10 tape-recorded and then transcribed reference interviews. Our study shows that there are several discourses within the reference situation. The dominating discourse, the reference interview discourse, is found within all the reference interviews.

The aim of the study is to learn more about the way preschool teachers work with Information and Communication Technology(ICT). More specifically, this study aims to explore how preschool teachers describe their experience of ICT, the conditions and opportunities to work with ICT, and their own knowledge and competence in the use of digital tools with preschool children. The research method consists of interviews with preschool teachers and observations at five municipal preschools in Stockholm as well as an analysis of the relevant passages in the Curriculum for the Preschool and the Curriculum of Stockholm city. This study shows that there seems to be great variation in the amount of ICT tools present in preschools. Preschool teachers expect a lot from ICT, and the improvements that it can make on their work.

The aim of this master?s thesis is to investigate a information center called ?Infoteket om funktionshinder?. The purpose of Infoteket is to collect information about disabilities and make it accessible to people with disabilities, their relatives and public. In this survey I will analyze how Infoteket can help people with disabilities to achieve empowerment. I use empowerment as a theoretical framework as Jay A.

The purpose of this study has been to examine how customers, by interacting with each other, can communicate and create the image of a brand. We find this topic to be relevant since there are no previous studies conducted concerning the customers influence on the brand image. Our ambition has been to describe in what ways and to what extent the customer can affect and influence the brand image by communicating with other customers. To fulfill our purposed we have targeted three important questions which are:? In which ways can the customer affect the communicated image of a brand?? To what extent can the customer influence the brand image and the perceived value?? Who has control over the brand, the customer or the company?For this study we have used a qualitative approach in which we have conducted eight personal interviews with brand consultants and the editor of the magazine Dagens Media which has given us the foundation for our analysis.

This thesis project has focused on studying ÅF?s business concept Energy Collaboration, which is their way of selling energy efficiency services. Thereforeongoing projects have been analyzed. The purpose was to determine achieved energy efficiency, costs and profitability for the studied projects. It was concluded that the Energy Collaboration is a good way of selling energy efficiency services, since the customer takes no risk and energy savings of about 15-25 % can be achieved with simple measures.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of forest roads.