The secondary control must be part of the production plan, since the capacity will bedeployed in advance, just as the primary control. The activation of the new frequencycontrol should be preformed in Vattenfall's operations centers (DC) to minimizecommunication delay. Vattenfall needs to work towards a more holistic optimizationsystem. The main issue for Vattenfall Generation is not how we produce but ratherwhen, which is done with creation of bids. This is where there is the mostopportunity for improvement.

SammanfattningDet här examensarbetet har gått ut på att undersöka hur en manual kan utformas för att instruera i att skriva klarspråk om teknisk information.Jag har arbetat utifrån principerna läsligt, läsbarhet och läsvärde samt läst studier i hur en skribent kan förenkla en text. Jag har också utfört en textanalys, gruppintervju och användartest för att skapa en manual som kan vara anpassad utifrån målgruppens behov. I mitt arbete har jag använt mig av principer för att skriva klarspråk. Det är att målgruppsanpassa, använda bekanta ord, skriva en logisk meningsbyggnad och att -strukturera texten på rätt sätt. Manualen blev kortfattad för att passa målgruppen. Den innehåller många exempel för att skapa förståelse och läsvärde..

Studier har visat att det finns ett samband mellan syskonplacering och locus of control, medan andra studier inte funnit något samband. Syftet med denna studie är att undersöka relationen mellan syskonplacering, kön och locus of control ur ett hälsoperspektiv hos gymnasieelever i årskurs 3. I undersökningen deltog 147 gymnasielever ifrån fem skolor i Kronobergs län. Resultatet visade att kön och syskonplacering samvarierade med intern health locus of control (F= 3,01;p< 0,03; ES= 6,2) och att syskonplacering och kön tillsammans inte visade någon signifikant inverkan på extern health locus of control (F= 2,20;p=<0,09; ES= 4,6). Fyndet kan indikera att manliga mellanbarn i större utsträckning strävar efter en intern health locus of control än kvinnliga mellanbarn.Nyckelord: Syskonplacering, health locus of control, intern- och extern locus of control, kön..

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Södra Skogsägarna and the aim of the work was to investigate the economical and biological output after mechanical planting with Eco-Planter compared with traditional manual planting. Eco-Planter is a tool for mechanized planting, fixed at the end of the boom on a conventional harvester. The study confirms that manual planting is less expensive under normal conditions. However, the differences between mechanized and manual planting are not that big and with technical development and/or increased labor costs together with an improved work organization the system with Eco-Planter could be competitive. The biological output, e.g. planting result and survival rate, seems to be quite good.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.

Abstract Background Todays guidelines for advanced CPR emphasize chest compressions with good quality and early defibrillation. Prehospital CPR performed by ambulance crew, an automated external defibrillator (AED) is used. The AED analyzes the heart rhythm and the performer is following the advice to chock the heart or not, given by the AED. During on-going CPR there are sequences when no chest compression is performed known as hands-off time. Hands-off time includes the time for the AED to analyze the heart rhythm and the time when advice is given to the crew.

During the milling of Sandvik Coromant?s world leading Drill with replaceable inserts,the CoroDrill880©, burrs appear around the milled surfaces. The burrs are removedusing different methods, one of which is deburring with special brushing machines thatare integrated into milling cells. The machines of the type Sinjet, use a Siemensguidance system. The deburring results are not satisfying and manual deburring isrequired afterwards.

The purpose with this paper is that trough a description of the management control at Jitech AB find out if traditional management control have been abandoned for benefit for modern management control and in which extent the transition have happened. Further is the second purpose with this paper to find out which decisions that lies behind the design of the management control and how these are in opposition to with the theory..

This thesis has been conducted at Saab Bofors Dynamics AB. The purpose was to investigate if a non-linear missile model could be stabilized when the optimal control signal is computed considering constraints on the control input. This is particularly interesting because the missile is controlled with rudders that have physical bounds. This strategy is called Model Predictive Control. Simulations are conducted to compare this strategy with others; firstly simulations with step responses and secondly simulations when the missile is supposed to hit a moving target.

The aim of this thesis is to examine how salesperson control can be exercised in a retail store environment. A case study has been performed on a Swedish fashion company emphasizing the relationship between the company?s upper level management and their retail store operations in order to describe, analyze and classify the prevailing management control mechanisms. The paper presents an agency theoretical approach to the relationship applying behavior- and outcome based control theory, performance measurement theory and incentives theory in order to give a comprehensive image of the control system. The main finding is that the company?s management control system as applied to the sales force in its retail stores can be categorized as mainly behavior-based despite several explicit outcome-based features..

Syftet med den här C-uppsatsen är att skapa en användarmanual för ett system som används inom TeliaSonera. Bakgrunden till uppsatsen är att det saknas en bra och enkel dokumentation till systemet.Användarmanualen får sin utformning genom interjuver med användare, systemförvaltare samt arbetsledare. De får bestämma hur den ska se ut och vad den skall innehålla. Tanken med detta är att få en så användarvänlig manual som möjligt. Den färdiga dokumentationen testas med hjälp av verkliga fall från den dagliga verksamheten och användarna kommer med förslag på eventuella förändringar.Manualen är företagsintern och finns endast i den slutna uppsatsvarianten..