The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Introduction: Dolomite AB was in need of a dummy arm for crutch testing, to complement their existing test capabilities. Background: A large number of people need crutches on a daily basis. For them it is essential that their crutches do not fail. ISO (the International Organization for Standardization) conducts ongoing work to guarantee the durability and function of e.g. crutches.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

The work covered in this report includes a literature study of the diesel dual fuel technology(hereinafter referred to as DDF). The literature study covers earlier work that has been doneregarding the use of compressed natural gas (CNG) and diesel in a DDF system. Moreover a onecylinder research diesel engine was fitted with a CNG fuel system for experimental testing. Theinstallation of the engine and the test cell is described. Results from the tests are presentedcovering emissions, heat release and pressure traces from the DDF-concept.During the literature study it was found that most research was related to heavy duty dieselengines.

The project is a practical and theoretical test of IP telephony with Skype in order to form a base for a comparison between IP-Telephony with Skype and the Public Switched Telephony Network (PSTN). PSTN is the common standard that most of us use for telephony today. The objective for the study is to simplify the choice between PSTN and IP-Telephony for the Swedish private customer user group. The project is supposed to answer the following questions. - How easy is it to start using IP-telephony with Skype? - How is the quality of IP-telephony compared to PSTN? - Are all services provided by PSTN available and accessible using the IP-solution? - How are the usability and the availability of support with IP telephony? - Is IP-telephony a cheaper solution and in that case under which circumstances? Within the project a collection of practical and theoretical tests have been performed to be able to form an opinion on the IP-solution in the following areas, installation, function, quality, usability, costs, accessibility and security. In order to study usability, a test group of ten persons have been used to evaluate the usability of the system.

There are different types of risk, examples include credit risk, liquidity risk and financial risk. In DeMarzo & Berk (2011, s. 293) is a study presented which is based on the yield of different types of financial assets between 1925 and 2009, the study show that a high risk gave substantially higher reward. With the study as a background, it is interesting to study practical risk management within participants of the financial markets of Sweden. In risk management there are several theories about whether risk can be calculated and analyzed with scientific methods in practice.

The aim of the study is twofold, to generate a sensory profile of Swedish wine today and to investigate the opinion of both wine producers and wine experts on viticulture in Sweden and wine from grapes grown in Sweden, achieved through a contextual analysis comprising a literature study and interviews with wine producers in Sweden and Denmark and wine experts from Sweden and Germany, and a sensory analysis at the company Ipsos. ?Mixed methods? was the chosen research strategy as the semi-structured interviews gave qualitative results and the sensory analysis would give quantitative results displayed as spider charts. There is a lack of studies investigating how the Swedish wine is perceived by consumers and consumers might be unaware that the Swedish wine, established through ?trial and error?, is increasing in quality every season, creating a need to display the sensory profile of Swedish wine to strengthening the perception of Swedish white wine. This study shows that the Swedish white wine today is a wine with a fresh, citrusy and flowery aroma and a fresh, citrusy and green apple taste, however, a sensory analysis cannot show if the attributes are those that are desired by the customer, a consumer test is necessary to conclude that. Trends point towards locally produced products, one reason why Swedish wine has great potential, yet the future needs to be secured through job opportunities and education. Creating an approval system for Swedish wine is suggested as a future improvement, it is a common procedure in most wine regions.

Studies show that some pupils with ASD (autism spectrum disorder) can have difficulties in understanding written texts. The present study seeks to examine whether pupils with ASD differ in their reading comprehension of a factual text and a literary text. Another aim of the study is to obtain a picture of the reading habits of high school pupils with ASD, what reading strategies they use, and how they work with texts in Swedish lessons in school.The study uses texts from PISA surveys from 2009 and 2000. The factual text Varmluftsballongen (The Hot-air Balloon) was taken from the try-out for the 2009 survey and the literary text Gåvan (The Gift) was taken from the 2000 PISA survey. To gain some idea of the pupils? reading comprehension of the texts, the present study used the tasks accompanying the texts, with certain changes in the questions about the text on the hot-air balloon.

AimThe aim of this essay is by using a motor skill track to see if there exists any remarkable difference in the motor skill profiles between pupils from our montessori school and the mean score in the "Nytidstest". The questions at issue we had were: How is the motor skill profile on pupils in year 2 and 3 practicing montessori pedagogy? Is the motor skill profile superior or inferior to the mean score in the "Nytidstest"? What factors, if any, concerning the montessori pedagogy affects the results of the test?MethodWe used a motor skill track consisting of 8 stations sellected from the "Nytidstest" adapted for year 3 (the original test consists of 16 stations). Pupils from year 2 and 3 in our chosen montessori school were tested in groups of 4-5 persons each. We made the tests on two occasions each lasting for 100 minutes at the time.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

In the year of 2005 the international standard IAS 40 came in to use in Sweden, this lead to an opportunity for the corporations to choose either to evaluate their investment properties according to the historical cost accounting principal. The model contains the obtaining price with reduction for the planned writing off. The alternative that IAS40 offers is the fairvalue principal, which evaluate the investment properties by consideration of the income versus outcome and surrounding factors for every accounting periodSince the fairvalue is buildt on numbers the corporations them self choose what to publish and for how long the value depreciation should be lasting before it should be taken up as an unrealized value change in the reporting material. This means that there is a big chance that the evaluation can be distortedSince we just recently have had strong cyclical variation and are on our way from an excess boom into a weak economic climate, this will be the first study performed about fair value in a weak economic climate since the adoption of IAS40.The purpose of the essay is to find out how well the booked value of investment properties owned by corporations listed on the Swedish stock market accord with the fairvalue that the market and the Swedish property index indicates on. To be able to test this connection we gathered information from the corporation?s annual reports which we compiled to see how the market comprehends.

A trading halt is a measure conducted by a securities exchange in order to reduce information imbalances between market participants, thus enabling a higher level of market efficiency. A market is said to be efficient when new information concerning a company is instantly reflected in its stock price, implying that abnormal stock returns cannot be systematically achieved in an efficient market. The purpose of this study is to examine the occurrence of abnormal stock returns following trading halts on the Stockholm Stock Exchange. The study is based on a sample of 64 trading halts executed between January 2003 and February 2008. Historical daily prices for stocks subject to trading halts during the period have been gathered from the Datastream Advance database, while information on date and time of trading halts have been collected from the Stockholm Stock Exchange website.

In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.