The parallel bars is used in physical therapy and is mainly used for patients who have to train walking and balance after a stroke or an operation. It consists of two long handrails with two legs on each handrail. These legs go down into two ground-plates and are locked at the wanted height with a pin. The parallel bars is an appreciated device and is used on a daily basis in many care units.The main issue with the manual parallel bars is that it is very difficult and heavy for a single person to adjust the height of it. If a larger adjustment of the height has to be done, the legs have to be adjusted one at a time otherwise the they will be locked.

Elderly patients experiences of palliative care ? a rewireThe purpose of this paper was to study elderly patient?s experience of palliative care with present knowledge as starting point. The questions were; what criteria do the elderly, dying person think is most important to fulfill in palliative care? and how satisfied is the elderly, dying person with the palliative care that are giving to him/her? The information were collected by a data based search trough science magazines and technical literature. Four relevant studies were found; Costello (2001), Heyland (2005), Wilson (1999) and Formiga (2004).

Elderly patients experiences of palliative care ? a rewireThe purpose of this paper was to study elderly patient?s experience of palliative care with present knowledge as starting point. The questions were; what criteria do the elderly, dying person think is most important to fulfill in palliative care? and how satisfied is the elderly, dying person with the palliative care that are giving to him/her? The information were collected by a data based search trough science magazines and technical literature. Four relevant studies were found; Costello (2001), Heyland (2005), Wilson (1999) and Formiga (2004).

The purpose of the study was firstly to describe the use of news articles from the largest Swedish news agency, TT Nyhetsbyrån, in four Swedish newspapers. Secondly, the purpose was to see if there was a homogenization of which TT-articles that was used. This was carried out by examining articles on the newspapers? local, domestic and foreign pages. The newspapers that was chosen were Aftonbladet, Dagens Nyheter, Göteborgs-Posten and Nerikes Allehanda.

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This masters degree is a study of factors of success in a drug preventions work of change and model or method which could facilitate this work. The target group, which is in focus in this survey, is alcohol- and drug coordinators, also called prevention coordinators who?s main task is to develop and coordinate the preventive work in the alcohol and drugs area. My method of investigation is a combination of literature studies and a quantitative poll study with the target group, alcohol and drug presenters?, in Sweden.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

The ISO 9000-series is a set of quality standards created by the International Organization for Standardization. The series is intended to provide guidance to companies in the process of deploying an effective quality management system. The series includes the requirements standard ISO 9001. This standard contains requirements on how a quality management system should be designed and how companies generally must work with quality issues. When a quality management system is introduced, if wanted, a quality certification can be implemented.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

Syftet med litteraturstudien är att undersöka arbetssätt som påverkar till en ökad tillit till vård och omsorg samt till vårdpersonal inom missbruk- och beroendevård. Metoden för utförandet av litteraturstudien utgick från artikelsökning i två olika databaser Trust, "Substance Abuse Treatment", ?Substance-Related Disorders?, ?Substance abuse?, ?Motivational Interviewing? & ?Case Management?. Samtliga artiklar granskades utifrån Göteborgs Universitet, institutionen för vårdvetenskap och hälsas mall för granskning av artiklar och tre olika kategorier skapades. Resultatet baserades på nio kvalitativa och kvantitativa artiklar som berör tillit mellan vården och patienten, Case managements förbättring av organisationen kring patienten och motiverande samtal påverkan på motivation till behandling.

The aim of this study is to make a comparative study between the grievances during the Dacke Warand the German Peasant´s War. These two conflicts may have occurred separately, regarding bothgeographical and chronological distances but also share common issues for this comparative study.Less than two decades separates these two conflicts and they were all by their own serious insurrectionsduring their time. While the German Peasant´s War was the greatest uprising in Europe up tothe French Revolution, the Dacke War was the biggest Peasant Rebellion in Scandinavian history.While the German Peasant War has been studied and researched by historians for a relative longtime, the Dacke War has been neglected in research history. If it were not for the Swedish professorLars-Olof Larsson?s studies during foremost in the 1960s, the Dacke War would have been a historicallyuncharted territory of research indeed.

In this thesis, the results of a survey regarding grade progression between secondary and upper secondary school in a municipality in the north of Sweden serve as the starting point for a study of the experiences and expectations of a number of 16 year old girls who are in the first year of upper secondary school. The study is performed by means of focus group interviews with female pupils from the three largest upper secondary schools in said municipality in an attempt to gauge their experiences of grades, grade assessment, teacher practices and perceived differences in how boys and girls are treated. The results show that most of the girls are disappointed with upper secondary school so far. Many of them feel that secondary school was both more fun and more rewarding in a sense of learning. Their appreciation of how this more rewarding atmosphere affected their grades differed between the various groups.

Many organizational changes have been accomplished in elder care since the 1980's and many of those have been influenced by market mechanisms. The purpose of this study is to examine how the implementation of these market mechanisms has affected three important aspects in the work situation for personnel. These aspects are, demand, control and support. To attain the purpose of this study, five qualitative interviews with home care personnel have been carried out. The interview material has been analyzed and structured with the help of Karasek and Theorells demand-control-support model.

Consumers seem to become more demanding in their buying behaviour within the fashionmarket. The society refers to individualism, personality and creativity, which affect people?s wayof dressing themselves. Many companies have started to work with aspects that create aconsumer experience to meet the customers? new demands.