The environmental issues have during the last decenniums gained an increased role in both the political arena and in the market economy. The society is therefore more knowledgeable about the environment and our impact on it. Through this enlightened state, stakeholders tend to put pressure on the organizations of today. They, more or less willingly, incorporate this responsibility to be a part of their business. Entrepreneurs in the environmental area have seen this rising market as an opportunity to gain market shares and other positive outcomes.

Today there is a keen competition between regions in the world for companies and inhabitants in order to improve regional development and economic growth. In many regions there is an active effort to create a good home base for companies and inhabitants. Since 2003 municipalities in nine counties in Sweden have come together in co-operative agencies in order to work towards more efficient regional development.This essay focuses on the relation between the state and the co-operative agencies in the regional development policy and which possibilities the state gives the co-operative agencies to pursue an efficient regional development policy, both legally and financially. I have researched and analysed this through models and ideas on how the state governs the administration and through the translation theory. The result of my study is that the co-operative agencies have a relatively large amount of freedom to make there own priorities, but the ability to act efficiently within regional development is limited..

Westhelicopter INC. has an aviation workshop providing qualified helicopter maintenance in accordance with PART-145. Maintenance and administrative base is situated in Luleå at Kallax airport. The types that Westhelicopter INC are currently authorised to service are: Eurocopter AS 350 Base/Line Maintenance, Eurocopter EC 120 Base/Line Maintenance and Robinsson R44 Base/Line Maintenance. The thesis work has been to make new maintenance programme for Westhelicopter INC. This maintenance programme will be used to follow-up the time of the components, service bulletins and ADs.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

In Sweden the residential and commercial sector is a major user of energy, why the Swedish government has set a specific goal to half the energy usage in buildings by 2050, compared to 1995. The Swedish Energy Agency has therefore started the campaign ?Halvera Mera? to encourage demonstration projects that will show how to renovate in an energy efficient way, and in doing so prove that it is possible to reduce a building?s energy usage by half and still make a profit. These projects are intended to serve as good examples and give inspiration to residential owners to perform energy efficient renovations. To make sure that these projects serve their purpose, it is important to know what will inspire and what will impede a residential owner to invest in energy efficiency improvements.

This is a study, the purpose of which is to investigate how the construction company Sefab Bygg AB is able to increase its profitability and render a more efficient production process through logistic solutions. The study is made during one of Sefab´s present projects. The project includes sanitary renovation of 650 apartments in the co-operative Opalen in Norrköping.To find out whether changes of logistic routines are profitable or not, it?s necessary to evaluate the total cost of the changes. A total cost analysis is a mapping of all the costs for a particular material, on one hand for the present situation and on the other after the change.

AbstractThe purpose of this thesis is to describe and analyse Europol. The research questions are:- How would increased powers for Europol impact on the cooperation between Europol and police authorities in EU-member states?- Which one of the two theories transactionalism and neofunctionalism can best create an understanding of Europol and its integration with the police of the member states?In so doing the study applies a qualitative method.Europol is the European Police Office and it was established through the Maastricht treaty in 1992 with the purpose of making the integration between police of the EU member states more efficient. In order for Europol to make integration between the police of member states more efficient it can be suggested that it needs for Europol to develop into having executive powers.One conclusion of this study is that Europol is an important tool for integration in the EU but there are at least three issues that are influencing the level of effectiveness in the integration work between the police of the member states; possible mistrust, that Europol has no executive powers and that it is voluntary for member states to participate in assisting Europol with information. Another conclusion is that Europol can be understood through an integration perspective when transactionalism and neofunctionalism are complementing each other..

The object for this study is a company developing and manufacturing vehicles for heavy transportation. The company distributes their products on a global market. Therefore the company is required to have efficient internal production development processes in order to successfully beat the competition. The purpose of this master thesis is to study how this particular company intends to implement their standardized theoretical product development process within their organization and how well it is done. We intend to identify and specify if the process has any unexploited capacity.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

In part this paper is a contribution to the ongoing Swedish discussion about our public structures. The discussion has picked up speed in the last years thanks to a government backed committee trying to come up with a suggestion to make our public sector more efficient. A big part of the debate is about the independence and work of our municipalities, what they should do, what they shouldn?t do and when the state should step in and take over. I make a theoretical investigation into one of these issues, the one about job creation.

In today?s tough business environment the need for good and efficient leaders are becoming more and more important. The businesses are in constant change, the world is more unpredictable and the competences of the employees are much greater today, which also calls for a new type of leader, a leader who not only is authoritarian, but also possesses soft skills. In this environment where there is this greater focus on leaders, leadership developments have emerged and increased in number over the last ten to twenty years. They try to develop leaders in all domains of their life, both professional and personal and the model we work with in this paper is Total Leadership, this model implies that you try to accomplish being a better leader throughout your whole life as a leader, to be whole, genuine and innovative, no matter career or position in life.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

Water logistics has long been a problem in order to effectively carry out stump treatment in both thinning and final felling. It is important that the stump treatment? equipment is configured as well as a sufficient amount of water is carried out on the harvester to get a cost? effective treatment. The flow control of the equipment has improved and water can be dispensed more efficient, but still the amount of water on the machine is a crucial factor in the total cost estimate. The knowledge of the tools available to bring water as well as the internal logistics of loading and transport to the felling site is deficient. Increased focus on "smart" solutions to manage water cost is of great importance in order to combat Hetrobasidion spp in both thinning and final felling. The purpose of the study is to describe and summarize different solutions of water logistics at stump treatment in final felling.

Title: Creating high awareness ? A study in how a company can create awareness with cost efficient marketing methods. (Skapande av hög medvetenhet ? En studie i hur ett företag kan skapa medvetenhet med kostnadseffektiva marknadsförings metoder).Authors: Alexander Edlund and Fredrik HanssonAim: Our aim is to reveal the pros and cons of cost efficient marketing and decide which cost efficient method works best in creating awareness. We also want to determine if the methods can be integrated in a successful way to achieve greater awareness.Method/Material: We have made a qualitative approach by conducting three in depth interviews with the company Bluetooth SIG?s marketing director Anders Edlund.