When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Accessibility is today a topic of high current interest. It is a requirement for equality and a democracy question. By the year 2010, easy measured hindrances in all of Sweden's municipalities should be cleared away; this is stated in Swedish law. The physical accessibility to our public places is particularly important for functionally disabled people since it affects their possibilities to be outdoors and also their participation in society. When designing these places, it is difficult to find solutions that fit everybody, especially since good accessibility not only should fulfill all physical requirements of accessibility but also values of experience.

Syftet med detta examensarbete är att undersöka och jämföra två olika beräkningsmetoder när det kommer till beräkningar av väggskivor. Den ena beräkningsmetoden baserar sig på traditionella handberäkningar där anvisningarna i BBK 04 (Boverket 2004) och Betonghandbok Konstruktion (Lorentsen, Mogens, Cederwall, Krister & Östlund, Lars (red.) (1990)) följs. Den andra metoden baserar sig på finita elementmetoden, och utförs med hjälp av programmet Strusoft FEM-Design Wall. Med Finita elementmetoden delas konstruktionen upp i flera små delar, så kallade finita element, som sedan beräknas var för sig, och sedan sätts alla delarna ihop till ett resultat för hela konstruktionen. Två olika väggskivor beräknades, en solid väggskiva samt en väggskiva med ett dörrhål i. Vid jämförelsen på den solida väggskivan visade sig resultaten stämma väl överens med varandra.

Title: I saw it on Facebook ? Youth presentation of self on FacebookAuthors: Nicole Dreher & Anders SkoglundPresented: 01.06.2010Purpose: The purpose of this thesis was to examine how the, in the study, participating youths make their presentation of self on their Facebook profiles.Methodology: The method used in the thesis was a social semiotic analysis focusing on the social semiotic concepts: semiotic resource, semiotic potential, affordance, denotation and connotation. A social semiotic analysis of composition was also used with the purpose to gain a deeper knowledge of the social semiotic affordances of Facebook?s composition.Theoretical perspectives: The theoretical base of this thesis consists mainly of Erving Goffman?s theory on presentation of self in everyday life as well as relevant theories to youth culture in sociology and identity in social psychology.Conclusions: The results show that the youth?s presentations of selves mostly takes place in their profile picture, status updates, groups, fan pages and through their communication with other users on their wall. The borders between front and back stage on Facebook entirely depends on the norms that the reader expects the profile owner to uphold.

After the fall of the Berlin Wall in 1989 the satellite states of the former Communist bloc immediately departed on a journey towards democracy and market capitalism. Among the many tasks of the newly elected governments, one was to transform the paternalist Communist welfare state into a social system that would decrease the oversized role of the state, at the same time as protecting the citizens from the hardships ensued from the transition.I have studied the evolution of new welfare systems in the Czech Republic, Poland and Hungary, three countries generally agreed as the most similar and most successfull transition countries of the Eastern bloc. Gøsta Esping-Andersen's prominent typology of welfare regimes, consisting of the liberal, corporatist and social democratic regime-types, has constituted the theoretical basis of the analysis. Simultaneously, applying new cases to the typology implies an element of theory testing.The study shows that 40 years of Communism and partial isolation from the West has not prevented these three countries from developing welfare states fully compatible with those of Western Europe and the Anglo-Saxon nations and that all three of them in fact fall within the scope of the corporatist regime-type..

Emma Eriksson and Christina Henriksson: Mirror mirror on the wall: A study on how ballad texts reflect women as carriers of tradition in nineteenth century Sweden, Växjö: Musikvetenskap C, 10 p 2005.The aim of this essay is to analyze relations between ballad texts and the lives of female carriers of tradition in nineteenth century Sweden. Four carriers of tradition have been chosen, connected by being informants to Gunnar Olof Hyltén Cavallius, a collector of medieval ballads in Sweden around 1850. The four women are Anna Ehrenström (1786-1857), Catarina Andersdotter (1792-1857), Johanna Gustafva Angel (1791-1869) och Wendela Hebbe (1808-1899). Their lives are seen from a women?s historical perspective.Although there are uncertainties regarding to what extent the collected repertoire of the four women reflects their repertoire as a whole, some conclusions can be drawn regarding relations between remaining ballads and their lives as women.

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The Swedish emigrants, in 1901-1904, were displeased with their home country, so they moved to America with hope to find a better life. Even though they were displeased they still had a great love for their home country and tried to either create a ?new Sweden? (the Swedish-Americans), or they traveled back to their families, hopefully with savings big enough to buy their own home. Sweden did not have a homestead act like the Americans did, which probably is the biggest reason to the emigration. There was also the question of each individual?s right to vote.

This bachelor thesis aims to draw attention to sound in the heritage sector in Sweden. In particular, to thesoundscapes that can be identified in our cultural heritage environments. Sounds in an environment, here calledsoundscapes, affect our perception of the environment and how we remember it.To find out how the heritage sector uses and would be able to use sounds, I have firstly studied if audio recording iscomparable with the visual photographic image. I then present examples of sound documentation concerning theconservation of built environment. In addition, I have interviewed five key informants who all have a centralresponsibility for five cultural heritage environments.

Concept - detail - buildingStockholm International Fairs, new main entrance I studied at the KTH School of Architecture from 1995 to 2000. After completing my studies I wanted to work in an office that had a structural way of thinking and that knew the building process; I therefore chose to work for Rosenberg Architects. I have worked on a number of projects, among them several for the Stockholm International Fairs, from the Rica Talk Hotel and Hall AE, to the new main entrance.In the projects we undertook at the School of Architecture we had to identify and draw details that were central to our concepts. I have here identified some key details that we considered to be essential for the concept in a built project; the new main entrance of the Stockholm International Fairs completed in 2013. The entrance has complex logistics with multiple intersecting flows: exhibitors, employees, journalists, VIPs and others.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.