This final year project is dedicated to investigate the problem domain of system maintenance management. The purpose is to find problems in the system maintenance management of today. Whether there is any problem that can be elicitated in the requirements engineering?s phase that could help to obtain more maintenance management friendly systems and if it is not possible to obtain more maintenance management friendly, what else can be done?It has been learned that there are many problems today in the problem domain and the most great ones are the system documentation, stress and a systemknowledge lack among developers, system managers and system users.The requirements that have been found for this problem is good documentation, and use of simple solutions in the creating of the system..

The purpose with this article is to give examples how to remain and in a long run develop a higher interest in maintenance activities and knowledge. First reason is the changed age-distribution with more number of older employees among maintenance personnel staff and second reason is demand for education due the increasing demand in environmental responsibility.In spite of there is a lot of knowledge of maintenance in national organizations of interests it will not be used in a sufficient extent in many companies. This knowledge is an important base to use to re-built the missing or loosed skills in companies. The national organization UTEK is involved in European projects to validate knowledge of maintenance. Lost of or bad maintenance activities will always affect on the environment.Establish a network between companies is a good way to exchange information in their common business areas.

Företags renommé uppmärksammas allt mer, både inom näringslivet och bland forskare. Båda grupperna verkar vara överens om att ett gott renommé är en stor konkurrensfördel, och mycket forskning finns om vad ett renommé består av och hur det bör förvaltas. Däremot verkar det finnas få undersökningar om hur ett renommé kan repareras efter att det har blivit skadat, trots att detta borde vara en viktig fråga för företag. Syftet med vår uppsats är att analysera området ?Reputation Repair?, det vill säga förstå vad som krävs av företag för att återupprätta ett skadat renommé.

Denna uppsats behandlar ämnet kriskommunikation. Olika kriskommunikationsteorier presenteras och tillämpas i fallet med oljejätten BPs oljekatastrof i Mexikanska golfen, våren 2010. Pressmeddelanden från företaget analyseras för att urskilja strategier utifrån teorin image repair och även svensk morgonpress granskas för att se hur väl BPs kriskommunikation återspeglas i nyhetsrapporteringen. Teorin image repair som vi använder oss av i vår studie är utformad av William L. Benoit.

In this report a systematic working procedure for risk classification of processing equipment from a maintenance point of view is described. How this system has been worked out is also an important part of the report. The classification system is adapted for use in complex processing plants. Preemraff Göteborg has been subject for the underlying study and application of the system.The system aims to give a good overview of the maintenance related risks at the plant. Furthermore, the analysis result is a good motivation for the suggested maintenance activities and as motivation for extended or decreased maintenance resources in total.

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

This diploma work handles how some parishes of the Swedish Church administrate their building properties.The report also includes how some external property managers in Sweden work with maintenance plans and other maintenance issues. Further, a number of deficiencies have been identified and suggestions to workarounds are treated. The conclusions drawn in this thesis are based on the author´s experience in the field, performed interviews, and literature studies. The result of the work shows a general lack of knowledge in many parishes what concerns regulatory requirements, properties with no maintenance plan and substandard supervision resulting in unnecessary and expensive repairs. Based on these results, different plans for the maintenance of the building properties of the Swedish Church has been proposed..

The economic crisis has affected the airline industry as much as it has affected all other industries in the world. The small airlines and maintenance organisations must find new opportunities and options in order to survive the harsh crisis. Priority Aero Maintenance is now an approved maintenance organisation performing maintenance on aircrafts, engines and components. The company sees economic gains in the future by becoming an approved organisation that follows the European Aviation Safety Agency guidelines (EASA) and meets the requirements outlined in the rules of Part-M.In order for the company to become an approved organization, responsible for continuing airworthiness of aircraft, a handbook should be presented to the local authority. This handbook describes the company?s responsibility for the continuing airworthiness in order for the authorities to get an insight into the company and its work.This thesis resulted in a draft of CAME (Continuing Airworthiness Management Exposition) and this draft has been approved by Priority Aero Maintenance.The CAME will in the future be used by the company as a basis for developing a more detailed manual to be presented to and approved by the Swedish Aviation Authority (Transportstyrelsen)..

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

The value of a good reputation for organizations is increasing today as consumers and citizens become more aware of brands. If a crisis hits an organization, there is now more to lose than before concerning reputation. Therefore the organization?s communication strategies must be developed to sustain the organization?s reputation during and after a crisis.In the field of crisis communication there are two distinguished theories which concern what an organization with help from crisis communication should do to undergo a crisis without losing its reputation. These theories are image repair theory and situational crisis communication theory (SCCT).

Presently Sjöfartsverket do their maintenance according to a standard program, which means that every maintenance task will be done when the task limit occurs. This leads to a very long downtime for the aircraft in some occasions and very short downtime in others. The goal with this work is to reach a higher regularity of the aircraft operation. To reach a higher regularity for the operational needs, this work will present a hypothetic better maintenance concept for Swedish Maritime Administration. The concept is based on equalized maintenance structure, which means that every maintenance occasions are meant to take the same time to perform.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

At Forsmark nuclear power plant a new course called "education in everyday safety" has been started in an attempt to improve the safety culture. The goal is to spread the of expectations and approach the maintenance management has set, to all employees working at the plants. During the course, theory is mixed with practical tasks to reach a common view how work should be done to achieve safety for the plant and the people that work there.The practical tasks are done inside "maintenance simulators". They are built inside 20 ft containers which contains two dummy pipe systems. On the pipe systems some valves, a flow meter and a pump has been installed.