The main objective of this research was to study how increased arterial oxygenation by the use of Pulsed Inhaled Nitric-Oxide (PiNO) influenced the metabolic and cardiovascular parameters on horses undergoing acute abdominal surgery because of colic. The parameters blood lactate, blood glucose, pH and heart rate were evaluated before and during anesthesia and closely after recovery. The study showed that blood lactate concentrations decreased significantly during anaesthesia in horses treated with PiNO compared to non-treated horses. It was also seen that the lactate concentration decreased most in horses with the highest levels before PiNO treatment. Since enhanced oxygen extraction ratio was evident in the PiNO group, improved oxygen delivery to the tissue may be a possible explanation for the improved situation.

I sen dräktighet och vid laktationens inledning avger mjölkkor stora mängder kalcium till fostret och mjölkproduktionen. Kons förmåga att upprätthålla kalciumbalansen sker med hjälp av mobilisering av kalcium från skelettet samt upptag av kalcium från tarmen, mekanismer som regleras hormonellt, huvudsakligen av parathormon (PTH) och 1,25-dihydroxyvitamin D3 (calcitriol). Om kons regleringsmekanismer inte lyckas återställa kalciumkoncentrationen i plasma drabbas djuret av klinisk hypokalcemi som kan orsaka kalvningsförlamning. Flera olika strategier har etablerats för att förebygga denna utveckling. En väletablerad metod är lågkalciumdieten som syftar till att stimulera djurets metabolism för att öka aktiveringen av de endogena regleringsmekanismerna vilket resulterar i en bättre förmåga hos djuret att återställa kalciumförlusterna.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

Rapporten avhandlar ett ämne inom maskinteknik, ett konstruktionsuppdrag från Saab Microwave Systems. Projektet går ut på att göra en viktoptimering av ett apparatskåp som sitter monterad i artillerilokaliseringsradarn ARTHUR.Projektets syfte är att uppnå en viktoptimering på 20-30%, dels genom andra material, som kolfiber och magnesium, men också genom annan design och utformning på detaljerna i skåpet.Hänsyn måste dock beaktas till kravspecifikationen som huvudsakliga beställaren fastställt, då främst att skåpet utgör ett EMI-skydd.Vi har tagit fram förslag på fackverksliknande förstärkningsribbor påde olika frästa detaljerna istället för de vertikala och horisontella ribborna. Detta tillsammans med en minskning av plåttjocklek har resulterat i lägre vikt. Om materialet också byts ut mot till exempel magnesiumlegeringen ZK60A som har sträckgräns och brottgräns motsvarande den redan använda aluminiumlegeringen så blir viktbesparingen ännu större på grund av magnesiums lägre densitet.Vi har dessutom tagit fram ett förslag på en ram i aluminiumprofiler som sedan kläs med aluminiumplåtar. Denna lösning resulterar inte i någon större viktminskning, men besparingen i tillverkningskostnad bör bli stor..

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

Many of todays studies show that district heating is one of the betteralternatives as heating source because of its low environmental load.The energy source is often leftovers from other processes producing energy or waste, like garbage or chips.Electricity in combination with geothermal heating is another heating system that has increased sharply during the last years, and also this system decreases the discharges that have negative affectson the environment compared to several other heating methods.This report aims to, concentrated towards these two different heating systems, estimate the amounts of discharges they indirect cause and how the environment is affected.We have calculated the mean value for discharges of carbon dioxide, nitrogen oxide, sulphur oxide and dust generated from electrical power used in Sweden.Through interviews and research we have gained data for the same substances that district heating based on combustion of garbage and biofuel generates.We have also in cooperation with a housing company chosen a building we see representative for many of the new single-family houses built in Sweden today.Based on its shape and appearance we theoretically created three alternatives of the same house, each of them with climate screens different from each other.Together with the amounts of discharged environmental affecting substances, these houses were the base for our calculations and studies when investigating the different heating sources environmental effect.The results have thereafter been analyzed and discussed from different angles..

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

Water is our most important provision and its quality is above all dependent on the geological conditions in the area from where it is extracted. Due to geological properties there are certain areas with an elevated risk of high uranium levels in the ground water, which in turn constitutes a risk for human health. Consumption of water that contains a high concentration of uranium implies a health risk due to the chemical characteristics of uranium. Livsmedelsverket (The National Food Administration) and Socialstyrelsen (The National Board of Health and Welfare) therefore recommend that precautionary measures should be taken when the uranium concentration in ground water exceeds 15 micrograms per litre. In particular, drinking water collected from wells in areas with uranium-rich bedrock may have a harmfully high level of uranium. One of the wells of the Ärla water purification plant, located near Eskilstuna, Sweden, contains water that exceeds the guideline of 15 micrograms per litre. One interesting technique for removing uranium from drinking water is adsorption to reactive filter materials.

When cylinders for motor saws are manufactured there are high demands on the cylinders strength and wearing qualities. Aluminum is a material with low density and is used by Husqvarna AB for their motor saw cylinders. The aluminum is strengthening with nickel that is attached to the cylinders through electrolysis. When aluminum is in contact with oxygen a film of oxide is formed. To eliminate the oxide and to prevent formation of new oxide zinc is used.

This thesis was carried out to give some background information to a report of SLU (Swedish University of Agricultural Sciences) for the Swedish National Rail Administration (Banverket). The requested information was to provide basic data for an environmental impact assessment of the construction of the tunnel through Hallandsås. The aim with the thesis work was to discuss and quantify the leaching of nitrate and the emission of nitrous oxide from the soil at the groundwater level established through the tunnel project. The nitrogen related processes that could be affected were described and discussed. The different areas where a decreased groundwater level can cause changes in the nitrogen processes are the wet and moist areas.

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

Åfors glasswork was a company which started in 1876 and closed in 2012 due to the bad economical situation in the company. After its closure, the glasswork left behind contaminated soil with different concentrations of heavy metals such as, arsenic from arsenic trioxide, a chemical used to remove bubbles during the melting of glass, and lead oxide, a chemical used in the production of crystal glass. Crystal glass?s production occurred under 1921-1971, but emissions of lead into the air from Åfors glasswork continued until 2011, because of the artist Bertil Valliens? artglas was made in Åfors glasswork from 1970?s and onwards.The aim of this study was to estimate how much lead (Pb) and arsenic (As) that were released by Åfors Glasswork into the atmosphere during the operational period of the glasswork in comparison with how much of lead and arsenic were purchased for the company. Added to the assistance of the data from National Archives the variations in the activities of Åfors glasswork could be shown.