Mechanical scaling is one of the most complex operations of all in the mining process. The operators are using both hearing, sight and feel to read the rock and to know where to scale and where to leave. They say they go on gut feeling in great extent, something that comes with experience. The scaling machine is placed into the edge of unsecured and newly blasted rock to hammer off the blocks that has become loose after the blast, but not enough to fall down. It goes without sayingthat it is a risky job.

The purpose of the work is to analyze and balance an assembly line at Fläkt Woods in Jönköping. The work is going to answer the questions about today?s throughput time, how much waste that occurs, number of staff at the assembly line, how the supply of material works and possible improvements that can be made at the work stations. The work is also going to give a proposal of improve-ments that can be made.The methods used to get the result include observations and measurements, con-versations with technicians and operators and also data from Fläkt Woods? data-base.Large variations in throughput time are measured during the measure period, from 3 hours up to 5 hours and 35 minutes.

Abstract The main aim for this research is to come to an understanding for why young people choose to apply for the machine program when the time comes for the students to make their choice of upper secondary school program. The second aim for this research is to try and come to an understanding on how to make the machine program more interesting for future students to apply to.  The method of this research is quality method with the usage of interviews. With a total of six students in the first grade going on a school in the middle part of the country I tried to get answers to my questions. There are many things that affect students when they are facing what gymnasium program to choose and a very common answer by students in this study is that friends and work after school are some of the reasons for why students choose, for example, the machine program. The study also shows that parents has less influence of the students choice of gymnasium program and in fact, all students in this study made the choice to pick the machine program as their gymnasium program, but not always the machine program as their first choice. With the comparison of similar studies with my study the results are often in line with what other scientist have come up with.

This is a study in the field of Music Information Retrieval (MIR) concerning classification of musicgenre. The study uses a music listening experiment and machine learning methods to determinewhether or not the drum sounds from different songs contain sufficient information to classifygenre.MIR methods are used to extract data from the audio signals. The data is used together with theclassification results of the listening experiment to train different machine learning algorithms toclassify the songs in different genres.The results indicate that using only drum sounds for genre classifications works well, both forlisteners and for machine learning methods..

St. Jude Medical Inc is one of the worlds leading companies in the medical technology area with cardiovascular devices as its specialty.Manufacturing implantable medical devices such as Pace Maker Electrodes requires complex design, safe processes and well trained operators. User friendly manufacturing operations are a necessity.Lately there?s been an increase of the manufacturing volume which also increased the number of operators. More operators need to be trained and cross-trained.

Biofuels are getting more important as EU plans to replace fossil fuels with renewable energy sources. Because of that Sveaskog has chosen to invest in developing the handling process of logging residue. The company has a joined organisation for handling both round wood and logging residue. They are also working at integrating the forwarding of the logging residue with the rest of the harvesting team. Sveaskog is currently extracting 44 % of the available amount of logging residue.

This essay is an evaluation of the act of establishment (2010:197). The act is about different operators' responsibility and accountability for new arrivals to get a more effective integration into society and to speed up the new arrivals' establishment on the labor market. The purpose of this act is to get more new arrivals involved in the Swedish labor market directly. By doing so, it gives these people a possibility to become self-sufficient. This study has focus in four different operators; Employment service, Immigration service and two local politicians from Social democrats (Socialdemokraterna) and Conservatives (Moderaterna).

The aim of this study was to investigate and describe conceptions that been used when people talks about grapples and to put together parameters that the customers sees as important when they chose a grapple from Hultdins. Every year Hultdins manufacturer and sells about 3500 grapples around the world. With so many users its difficult to oblige everyone. To get an apprehension of what kind of grapple the operators wanted a formula with 18 questions was made. For the interviews 20 forestmachineoperators were choicest who had experience from Hultdins grapples, a lot of them also had experience from other grappleproducers and constructions. The study showed that it is the durability the users give priority to.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

A Road project?s frame is built up of a decision- and consultation process, where the results of the preparatory studies are being discussed. The aim with a consultation process is that all theopinions and knowledge from the operators' will be taken into count in the basis of information, that is needed in order to the different involved operators' to take a decision.The aim of the essay was to investigate how the decision- and consultation process for a road project, the E4 section between Uppsala Läby, turned out. The aim is also to bring up how theprocess could have been done more correctly. The study was carried out through a qualitative method with an analysis of materials from the National Road Administration's archives, the associated Environmental Impact Assessment (EIA) and through interviews of the different operators.My theoretical basis has been a Stakeholder Analysis and its principles, and theory about different executions of social planning.The result showed that the decision- and consultation process has been bursting in democracy and consideration taking of the different operators' opinions, has been poor from the developer?s, in this case the National Road Administration's, side.

Forest ebeaver is, equipped as a bio-energy harvester, approximately four and a half meter long and weigh just over two tons. The main purpose of this report is to find out whether a small machine like Forest ebeaver can be profitable used in early thinning. To find this out a study has been made using the machine to thin in a young pine stand..

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

Sustainability work is something that is emphasized more and more. Corporate Social Responsibility, CSR, is discussed and the question of how much responsibility companies should really take is frequently in the news. Companies tend to ask themselves how much responsibility they should take. CSR is a common concept of companies environmental and social work and a concept we tend to see here and there in our modern society. CSR includes companies? social responsibilities, both in terms of carbon footprint, working conditions, social responsibility and more.

This thesis examines the effects of proximity operators and query expansion with synonyms on retrieval performance. The queries were expanded with synonyms and structured with proximity operators where the permitted distance between terms varied from 1 to 3. The expansion terms were selected from the online lexical reference system WordNet. Initial query terms were selected from 28 topics that contained compound words and were chosen on the basis of their expandibility. The English morphological analyser ENGTWOL was used for normalization of query terms.

The building and plant sectors represent a large part of Sweden?s energy use. Putting energy requirements in public procurement as a tool for reducing energy consumption in the building and plant sectors is therefor an opportunity that operators can take advantage of. The aim of this thesis was to map the energy requirements in procurement that operators in the public sector use today in building and plant projects. The analysis was made with respect to if the energy requirements corresponded to the parts with large energy use in building and plant projects and also in which way energy requirements in procurement are written in the contract.