There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

The comprehensive goal in this study was to examine important factors in an introduction of a new machine team. The aim was to identify what elements should be part of an introduction program for new machine team. The examination was done together with Stora Enso Skog. A new machine team and their supervisors where analyzed during a six month period. The evaluation was done with open interviews of the team members and their supervisors. The main question was what should be included in an introduction program to develop a successful machine team as effective as possible? Interviews of the new team and analyses gave good indications how the procedure should be done.

This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

This is a study of foster homes. The focus is at the methods, used at foster homes evaluations and at guidance/support the foster homes are offered.En questionnaire is made in Skåne, on this theme.Except that, it contains a fairly lot of useful information for families who are interested in becoming foster home.The questionnaire is made among public and private participants who evaluates new foster homes and places children (under 18 years) in Skåne.Because of the low answer frequency, we can?t generalize the result of the questionnaire. But the result we have obtained indicates that Kälvestens evaluation method is used frequently.In the subject of support/guidance we can?t see any specific methods used.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

The point of the study is to investigate educational and vocational counselors' strategies on drop in calls. In order to answer the purpose, the issues concerning the educational and vocational counselors' strategies and guidance models/methods at drop-in calls investigated.Qualitative interviews were conducted with six educational and vocational counselors'.In the study it appears that the educational and vocational counselors' are unable to have any strategies for drop-in conversation because the applicant will come spontaneously and the educational and vocational counselors' lack information about the individual and its purpose of the interview. Guidance models/methods designed to facilitate for the applicant and give them a sense of understanding about them selves there environment and results in a clarification of the election, not often used during the drop-in calls.These are not often used due to the lack of time because the intention of the call is to provide with information to the applicant in as little time as possible. In an educational and vocational counselors? perspective the guidance that is offered at drop-in calls defective..

Abstract The main aim for this research is to come to an understanding for why young people choose to apply for the machine program when the time comes for the students to make their choice of upper secondary school program. The second aim for this research is to try and come to an understanding on how to make the machine program more interesting for future students to apply to.  The method of this research is quality method with the usage of interviews. With a total of six students in the first grade going on a school in the middle part of the country I tried to get answers to my questions. There are many things that affect students when they are facing what gymnasium program to choose and a very common answer by students in this study is that friends and work after school are some of the reasons for why students choose, for example, the machine program. The study also shows that parents has less influence of the students choice of gymnasium program and in fact, all students in this study made the choice to pick the machine program as their gymnasium program, but not always the machine program as their first choice. With the comparison of similar studies with my study the results are often in line with what other scientist have come up with.

This is a study in the field of Music Information Retrieval (MIR) concerning classification of musicgenre. The study uses a music listening experiment and machine learning methods to determinewhether or not the drum sounds from different songs contain sufficient information to classifygenre.MIR methods are used to extract data from the audio signals. The data is used together with theclassification results of the listening experiment to train different machine learning algorithms toclassify the songs in different genres.The results indicate that using only drum sounds for genre classifications works well, both forlisteners and for machine learning methods..

As a student during my studies, I have been told about entrepreneurs who have red numbers in their financial statements, and there is a forest machine operator shortage in Sweden. The basic idea of this thesis was to examine the underlying factors that may have caused the problems described above. The aim of this thesis was to investigate the factors that create stress and job satisfaction as a forest machine operator. The study was performed as a comparison between forest companies own harvesting teams and entrepreneur teams to investigate if there are any differences in stress and job satisfaction between the two different types of team. The study was conducted in collaboration with SCA Skog. The material for this study was collected by doing interviews with SCA's harvesting teams. A total of 27 forest machine operators were interviewed, divided into a total of 10 separate harvesting teams. It was very similar between the different type of teams, which situations the operators experienced stress.

Forest ebeaver is, equipped as a bio-energy harvester, approximately four and a half meter long and weigh just over two tons. The main purpose of this report is to find out whether a small machine like Forest ebeaver can be profitable used in early thinning. To find this out a study has been made using the machine to thin in a young pine stand..

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Preschool is a place that is continually undergoing change at a rapid pace and developing the skills of our educators is essential for their ability to keep up with these changes. Guidance conversations can be used as a vital tool for the educators competence development.The purpose of this essay is to investigate how educators, special educators and preschool principals think and reason about the use of guidance conversations in preschool.A qualitative method has been used in the shape of interviews with educators, special educators and preschool principals working within different districts of a medium sized city in the south of Sweden.These interviews revealed that the use of guidance conversations is often controlled by specific needs and is used when a problem arises amongst the children. There are many expectations on the special educators role in these conversations, one of which is the role of conversation leader with the purpose of guiding the conversation amongst involved parties and give them the tools they need to resolve problems by themselves instead of delivering packaged solutions..

The scarcity of qualified forest machine operators as well as the increased competition for competent machine operators among others from the mining industry in Norrland, were the reasons to investigate what attracts and what deters active and potential forest machine operators to the occupation. An interview study was conducted among four groups with four persons in each group. The groups were students in year 1 and 3 respectively at a forestry school at upper secondary school level as well as employees of a forest company and employees of contractors. The majority of all respondents were of the opinion that their interests in machines had been important for the choice of occupation. But for the active machine operators both the interest in the forest and their interest for machines have had importance for choosing this occupation.