Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.

This report is a joint venture with SCA Forest, Ångermanlands forest man-agement area. The purpose of the study is that SCA Forest wants to know what the landowners in Ångermanlands forest management area think about SCA Forest and who they deliver their timber to. SCA Forest is the largest private landowner in Europe, with an area of about 2.6 million hectares. Today, SCA offers lumber, wood products, tis-sue and packaging and has factories all over the world. SCA Forest has five forest management areas in the north of Sweden, with the headquarters in Sundsvall. A questionnaire was sent to 265 landowners, where they had to answer 15 questions with possibilities to give comments. The survey was sent out on 21 of February with a response requested by 3 of March 125 landowners responded to the survey, giving a response rate of 47%.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

Detta examensarbete har genomförts på Aven Rabbalshede AB i syfte att kartlägga företagets dåvarande situation i dess interna logistikflöde, för att sedan lägga fram förbättringsförslag som kan implementeras för att förbättra detta flöde. Målet var att reducera trucktrafiken i fabriken med minst tio procent.Aven Rabbalshede AB är ett tillverkningsföretag av lastpallar, träemballage, transportstöd och lådor. Företaget är en del av Avenkoncernen som är en av Skandinaviens ledande tillverkare av lastpallar och träemballage. Aven Rabbalshede AB är den största enheten inom koncernen med cirka 55 anställda och en produktion på cirka 1,3 miljoner lastpallar per år. Företaget hade en bristande struktur och systematik över truckflödet och materialhanteringen vilket har inneburit stora och många mellanlager samt andra svårigheter.Examensarbetet innebar att först och främst kartlägga vad respektive truck gjorde under en arbetsdag för att kunna analysera hur dåvarande situation såg ut.

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

When the Iron spirals investigated in this paper saw the light again no one looked at them as nothing more than decoration. It was first during the 2011 excavation in Old Uppsala that the symbolism of the items no longer could be ignored. The spirals of Old Uppsala lay along the walls of the great hall, which stood upon one of the human constructed plateaus in the area. The hall had been burned down and then cleared of all lumber. Then the iron spirals had been placed in the positions and then everything was sealed with a layer of clay.A study of the artifact began with the purpose to contextualize and interpret the iron spiral.

The purpose of the present study was to examine effects of driver, vehicle, and environment characteristics on Collision Warning System (CWS) design. One hypothesis was made that the capability of collision avoidance would not be same among a driver, vehicle, and environment group with different characteristics. Accident analysis and quantitative analysis was used to examine this hypothesis in terms of ?risk? and ?safety margin? respectively. Rear-end collision had a stronger focus in the present study.

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Problem formulation? Are there any factors affecting the choice of marketing strategy?? What is it that determines the degree for the company to use a standardized or a adapt marketing strategy?? How profitable is Scania's marketing strategy in each country?Objective: The overall aim of this study is based on local adaptation and global standardization to compare the degree to which the company Scania chooses to adapt or standardize its marketing to the South American and Asian markets.We also aim to compare and describe any factors that affect the countries' differences in marketing strategies and to evaluate and measure the profitability of marketing strategies in each market.Methodology: The study is limited to Scania's marketing in the truck market in Argentina, Brazil, Malaysia and Singapore from 2006 to 2010. In order to answer the study's problem formulation and purpose we have chosen to combine a qualitative and quantitative approach. Four interviews were conducted with marketing executives from Argentina, Brazil, Malaysia / Singapore and Sweden. We have also chosen to examine Scania's annual report and include figures on the market shares of Scania in the respective countries and the number of sold Scania truck which is then compared against the number of registered vehicles by country.

Holmen Skog, region Norrköping, is located in an area with good potential for backhauling because a large number of geographically scattered mills. However, despite these factors there are many difficulties preventing the realization of this potential. The purposes of this study were twofold. First, from a hauling contractor perspective, to calculate backhauling profits and suggest a profit sharing scheme. Second, to identify and quantify obstacles and possibilities for realization of backhauls.The study required the use of three different types of methods.

I en stor del av arbetsolyckor som anmäls är en truck inblandad. För att undvika att fotgängare blir påkörda av industrifordon används ofta påkörningsskydd. På Volvo Group Truck Operations i Skövde används idag påkörningsskydd i fabrikerna för att avgränsa fotgängare från fordonstrafiken. Volvos påkörningsskydd är en helsvetsad stålkonstruktion som är fäst i betonggolvet med expanderbultar. Dessa påkörningsskydd är byggda efter platsen de monteras på och är därför svåra att återanvända och reparera.

An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process. In this study the economic contribution of different dimensions/products are analysed.

BT is a global company within the lift truck industry. The main office is located in Mjölby. In Europe all sales and service activities are carried out by fully owned sales companies. I North America, BT RAYMOND develop and distribute trucks under a different brand. For the rest of the world BT works together with a distributor network, most of them are fully independent others BT has a small ownership in.