This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

The capacity to process and to remember information is a basic condition for language ability and for coming reading ability. Reading ability is strongly connected to phonological awareness, receptive vocabulary knowledge and working memory capacity. In what way hearing impairment in children affects development of cognitive skills and later on reading ability is an area that has attracted minor attention for research.The aim with this study was to investigate changes in cognitive skills and reading ability in children with mild or moderate hearing impairment after one year of progress and furthermore if any connections between any increases of the abilities were to be found. Comparisons were made with results from age adequate normal hearing children. Moreover prosodic ability on word-level was tested this year.

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

The Sweden Democrats uses a term to describe a situation where ?swedes? are being discriminated against by other ethnic groups and where the elite is promoting this. The term ?svenskfientlighet? can be translated as ?swedofobia? and in this thesis a speech by the party leader Jimmie Åkesson held during the election campaign that solely was dedicated to this term is being analyzed with the help of tools developed by the scholar Ruth Wodak. Ruth Wodak has previously analyzed the rhetoric by other European right-wing-populist parties like FPÖ in Austria and has asked for other researchers to analyze the speech used by right-wing-populist and extremist parties to get a better understanding for just how these parties construct their different enemies.

The aim of this study was to find possible relations between behaviour and physiology for puppies during different parts of a puppy test. This work deals mainly with the physiological part of the study. Thirtysix puppies, från five litters, were tested in a behaviour test where heart rate was measured and saliva samples were collected before and after each part in the test. Saliva and urine samples were analyzed for corisol concentration as an indicatior of stress. The tests were performed during two consecutive days in the breeders' home when the puppies were seven weeks old. In addition, heart rate and cortisol levels were also measured in the bitch since we were interested in finding out if there were any relations between physiological levels in bitches and puppies.

Purpose: The purposes of the current study were to investigate whether there were any differences in the perceptual ability between professional and non-professional ice-hockey players and whether professional players are better at distinguishing, paying attention to and concentrating on what is important during intense physical activity. Method: Twenty male ice-hockey players (10 from both the Swedish first and third divisions) participated in the study. Wingate test were used for physiological measurements while three psychological tests were presented in front of the participants. Stroop, Flanker and Fast counting tests were used to measure perceptual and coping abilities during intense physical activity and the differences between the two groups. Results: Fast counting and Flanker word 2 tests showed a significant difference between the two groups, whereby the professional groups was faster and more accurate than the non-professional group in answering.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

The main topic of this thesis is to evaluate the impact on the usability of web pages when using responsive web design, a concept for developing web pages whose design adapts to the screen size being used. This is done by creating a responsive prototype based on an existing web site. A number of usability tests are conducted on the two versions of the site in order to compare the time to complete the tests and to observe the behaviour of the test participants. The tests are conducted on desktop as well as on mobile devices with varying screen size.The number of test participants was relatively low, and so the quantitative result is not statistically valid. However, the conclusion is that the most effective combination is to use either of the sites on desktop format.

Syftet med denna studie är att undersöka hur en grupp typiskt utvecklade, svenska barn, i åldrarna fyra till tio år presterar på tre deltest i VMPAC, för att därmed skapa ett underlag för en referens för svenska barn i bedömningen av avvikande utveckling. Studiens frågeställningar är: 1. Hur presterar en grupp typiskt utvecklade, svenska barn, i åldrarna fyra till tio år, på tre deltest i VMPAC (Focal Oromotor Control, Sequencing Maintenance Control och Connected Speech and Language Control)? och 2. Förekommer det några skillnader mellan en grupp typiskt utvecklade, svenska barn, jämfört med den amerikanska normeringen i VMPAC och barn med verbal dyspraxi (CAS) undersökta inom ramen för en magisteruppsats (Björelius-Hort, 2009)? Oral- och talmotorisk förmåga hos 23 svenska barn i åldrarna fyra till tio år, som åldersmatchats mot barn med verbal dyspraxi (Björelius-Hort, 2009), testades med deltest två, tre och fyra ur VMPAC.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Noise is a growing health problem. People are not always aware of the injuries that noise can cause. The media culture of today has a big influence on teenagers. This is caused by portable music players, computers, concerts etc. The schools are having larg classes and that can cause a lot irrelevant speech during lessons.

This is a comparative study between traditional group work and cooperative learning among 9 graders at a Swedish high school. The classes did an assignment that involved translating and then both students and teachers answered a questionnaire. An example of how profitable cooperative learning is is the fact that the speech activity was more equal in the cooperative groups. All the students in the cooperative groups had to contribute to the assignment in order to fulfill the assignment. The reason for higher speech activity is the structure of cooperative learning, which involves roles suited for the assignment.

Confrontation naming is commonly used in speech and language pathology to diagnose neurogenic communication disorders and evaluate naming ability. The existing Swedish assessment instruments for adults consist of pictures depicting nouns. In this study, parts of the instrument An Object and Action Naming Battery were used, containing pictures depicting both nouns and verbs. The study?s purpose was to explore the degree of difficulty in the material, based on the naming of the participants, and examine whether different variables correlate with the results in confrontation naming.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

This bachelor degree project was carried out at Saab AB Service and Repair, Arboga, Sweden. The objective was to design, construct and implement a new stable and reliable method of measuring the continuous vertical displacement (height) of the military search radar PS861 mounted on a hydraulic powered elevator. The end product needs to be durable enough to be fully operational in the harsh environment of an outdoor elevator shaft and yet as accurate and precise as possible since one of its purposes is to calibrate control equipment. Previously used technique has proven not to meet any of the above mentioned properties.A prototype using a high resolution quadrature output rotary encoder has been developed, allowing a completely digital interface. This new method has been evaluated in laboratory environment where tests have been conducted regarding both reliability and validity.