The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

Detta examensarbete har genomförts på ABB Power Products/Instrument Transformers i Ludvika. Syftet med arbetet har varit att undersöka temperaturexpansionen för en isolerande olja som använd i produkten Capacitor Voltage Transformer (CVT). Oljans egen temperatur­expansionskoefficient                          var redan känd, men arbetets syfte var att bestämma en Brutto­temperaturexpansionskoefficient, med andra ord undersöka hur mycket de ingående komponenterna i en CVT påverkar den totala volymexpansionen inuti enheten.För att bestämma bruttotemperaturexpansionskoefficienten har ett prov i klimatkammare utförts. Provet bestod av två aluminiumkärl vardera med ett monterat mätrör. Det ena kärlet fylldes med olja och det andra kärlet med olja och kondensatorinnehåll motsvarande inne­hållet i en CVT.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

Vindkraftverk ansluts idag i snabb takt till elnät runt om i världen. Elnäten är ofta inte tillräckligt dimensionerade på platser där vindkraftutbyggnad är lämplig vilket leder till ett behov av nätförstärkning. Förstärkning sker konventionellt genom att övergå till en högre spänning, något som kan vara förenat med stora kostnader och ledtider. Bland annat därför har en filosofi med beteckningen smarta elnät uppstått, som handlar om hur elnätsystemet ska se ut när det är mer anpassat till de nya energikällornas karaktär och samtidigt medför ett mer effektivt totalutnyttjande. För vindkraftverk kan det då handla om att i högre grad än idag reglera produktionen och understödja nätet, t.ex.

Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

I samband med att mellanspänningsnätet kablifieras ökar också kraven vad gäller fellokalisering. För att hålla avbrottstiderna i nätet korta är effektiv felsökning erforderlig. Detta arbete syftar till att kartlägga och redogöra för begränsande faktorer som finns vid fellokalisering med fokus på pulsekometoden. Uppdraget utförs tillsammans med Vattenfall Eldistribution AB.Det har uppdagats problem gällande fellokalisering på mellanspänningskablar med pulsekometoden. Ett flertal faktorer bidrar till denna problematik.

Freedom of establishment statutes that restriction of citizens within the EU can not occur. A citizen should be free to establish themselves in a Member State and not be hindered if they choose to leave the State. "Citizens" also includes legal persons such as companies. Legislations in Member States which prevents the freedom of establishment shall be prohibited. When a company chooses to merge across borders and thus cease to be a Swedish company, the Swedish rules for exit taxation applies.

Småföretag utgör 99 % av totalt antal företag i Sverige, och därmed är småföretagandet viktigt för det svenska näringslivet. Banklån utgör idag den vanligaste externa kapitalkällan för småföretag som söker finansiering och då det innebär risk för bank att låna ut pengar krävs det en finansiell bedömning av bankens handläggare för att bedöma risken. Finansiell bedömning kännetecknas av informationsasymmetri, och för att kunna hantera problematiken med informationsasymmetri fordras det att handläggare samlar in och tolkar signaler från småföretag. Då det finns utrymme för bankens handläggare att tolka småföretagens signaler är det relevant att studera hur handläggares kunskapsstrukturer påverkar finansiell lånebedömning. Syftet med denna studie är att skapa förståelse för hur kognitiva kunskapsstrukturer kan tas sig uttryck i bankhandläggares finansiella bedömning av småföretags låneansökningar, detta genom att (1) identifiera centrala signaler i bankhandläggares finansiella bedömning av småföretags låneansökningar, och (2) utveckla en modell bestående av strategier för hantering av signaler i finansiell bedömning för bifall och avslag av småföretags låneansökningar.

The aim of this study was to map and date glacial flutings with ice flows deviating from the predominating northwesterly ice flow direction in the southern part of Norrbotten County in northern Sweden, and also to investigate if parts of the glacial landscape are older than previously thought. The traditional view is that most landforms in the area were formed during the late Weichselian (W3). Analysis of the new high resolution elevation model (2 m grid) derived from laser scanning was performed after treating the data with a hillshade tool in ArcMap to reveal terrain features such as flutings. The analysis resulted in a map showing four main groups of deviating ice flows (N-S, NO-SV, SO-NV and S-N) and several westerly ice flows. The majority of flutings with deviating ice flows were found in low terrain.

The purpose of this thesis is to evaluate and update load curves for Fortum Distribution AB. Theload curve method is a tool used to forecast the strain of an electric grid. The method is based oncustomer annual energy consumption, outdoors temperature as well as customer category. Theload curve method was established by Svenska Elverksföreningen at the start of the nineties andfocus was put on standardizing annual energyconsumption, in order to make the method usableacross the nation. Present consumption patterns have changed since the original load curves wereproduced, which leads to a need to update the load curves.The work began with an update of present load curves according to recommendation taken fromanother earlier thesis.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

The concentration and storage of organic chlorine and chloride were determined in soil, to a depth of 40 cm, in a coniferous forest in the Stubbetorp catchment area in south-east Sweden. Also, the spatial distribution of the two forms of chlorine was determined. Soil samples were collected at 49 of the nodes in a grid with approximately 105 m between the nodes. The analysis of spatial variability suggested that no spatial autocorrelation was present either within the variable organic chlorine or chloride. This means that no sample was more influenced by another nearby sample, as compared to other samples further away.

Through our study we have found that there are moresimilarities than differences in leadership styles. The dominant leadership style of managers in both private and public sector is the democratic leadership style, often in combination with other styles; most notably the authoritarian leadership style. The charismatic leadership style doesn't seem to be popular in neither private nor public sector.Title:                                                                              A study of leadership styles in public and private sector Course:                                                    Bachelor Dissertation - LeadershipAuthors:                                                  Milos Kostic and Rudina ShabaniAdvisor:                                                   Ingemar WictorKeyword:                                                Leadership style, public, private, leadershipProblem formulation:          What differences and similarities in leadership styles are there between managers in private companies and managers in public companies?Purpose:                                                  Our purpose has been to find which similarities and differences there are in leadership styles between managers in private sector and managers in public sector.Theoretical framework:       After studying the theory of leadership, we found four different leadership styles relevant to our study. In the theoretical framework we discuss theories of authoritarian leadership, democratic leadership, laissez-faire leadership and charismatic leadership.

Bristly swan-neck moss (Campylopus atrovirens) is in Sweden a very rare moss that only grows on a few blocks and cliffs around Gothenburg. The species can globally only be found in areas with high precipitation. Rain fall in Gothenburg has increased with a stronger greenhouse effect. Air pollution in Gothenburg has also improved. Mosses generally benefit from these conditions and this papers hypothesis is that the population of the species has grown because of these more beneficial conditions.

The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.