The objectives of this research were to determine whether the natural rattan resources in Sulawesi, Indonesia can cope with the strongly increased harvesting pressure that has occurred over the last centuries. I was furthermore looking for patterns in the rattan population dynamics that might give a hint on how the harvesting system could be improved to ensure a maximum sustainable yield. To answer these questions, I developed an individual-based model to analyse the dynamics of rattan growth in connection with rattan harvests by locals to identify sustainable levels of rattan harvests around villages in Sulawesi, Indonesia. Scenarios with different harvesting intensities were run to compare the change in harvest amount. For a given harvesting pressure, scenarios with a high number of harvesters and a low harvesting frequency had the same effect as scenarios with high harvesting frequencies and a low number of harvesters.

This paper exemplifies how the physical environment affects clients? experienced service quality and how companies work with the physical environment. In the empiric study, we conducted a case study and studied two hairdressing saloons. The study showed a connection between physical environment and experienced service quality in the business of hairdressing. Owners of hairdressing saloons perceive that a combination of the personal meeting and the physical environment influence the clients? general impression and their experience of quality.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

This degree project handles acoustic measurements of the heat pump EcoAir 107, made by Enertech CTC AB. The sound from the three sound sources of the heat pump, fan, compressor and four way valve, have been measured to find out how they affect the total sound level of the product.Measures to attenuate the sound level have been developed and tested. By comparing these with the sound of the heat pump, in its original state, we have found out the measures which have best effects.The best attenuating measures came to be: taped openings and holes around the compressor space, isolating the top and the bottom of the whole construction, support of the fan bottom part and shielding of the sound source with a screen at a distance of 110 mmThese measures have been tested together and an average attenuation of the total sound level with 3,9 dB have been accomplished. In the front of the fan where the continuous sound is the strongest, the attenuation was 4,7 dB.This project is meant to be used as a guide by Enertech CTC AB:s during their future developing process..

In a sequence described in the next paragraphs, I remove the poorly insulated roof of Gustavsberg Porcelain Factory and make new use of its  foundation. The monolith cement slab, once supporting heavy industrial machinery, is now the site of lakes and other movements:The top floor area is split, and a new built volume, one story higher, overtakes the southern half resting on the factory?s basement, digging into it at its western and eastern ends. Striking horizontally, the fissure exposes a long central axis, taking advantage of the factory?s horizontality to articulate vastness .

Forest ebeaver is, equipped as a bio-energy harvester, approximately four and a half meter long and weigh just over two tons. The main purpose of this report is to find out whether a small machine like Forest ebeaver can be profitable used in early thinning. To find this out a study has been made using the machine to thin in a young pine stand..

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

Partnering is a collaboration method where the contractor and the client work together, based on a mutual trust towards each other and with a common goal for the project. The method originates from the United States where it was early adapted by the U.S. Army Corps of Engineers. It later spread internationally where the United Kingdom and Denmark were early in Europe to see the potential with partnering, to help aid with the issues they were having where construction projects kept running late, going over budget and lacked in quality. By using partnering you can achieve a shorter building time, improved work relationships and enhanced efficiency and cost effectiveness.

Background: The background shows that since the consumption patterns constantly are changing and the Internet usage is growing it creates more opportunities for the companies to interact through new media. There are two ways to go for companies that intend to use social media as a marketing strategy, to be in the possession of their own information or get help from a third party.Problem definition: What factors are important in the long term survival of the companies when choosing a social media?Objective: The objective of this essay is to analyze and evaluate the personal blog and the company blog as an information technology strategy.Method: The essay will have a hermeneutic and quantitative approach in the form of a survey. Theories: Consumer Behavior, The Buying Decision Process, Involvement Theory, Business Concept, Branding, Total Communication Theory, Word-of-mouth/web and Service Profit Chain.Empiric: The empiric will consist of the results from the survey.Results: The result shows that the blog is effective as an information technology strategy however the companies should adapt their choice of blog to the products that they sell.Conclusion: Important factors for companies that seek long-term survival are involvement, communication and loyalty. It is also important to use a relationship marketing approach. .

The aim of this study was to investigate the possibility of performing inter-species embryo transfer under actual field conditions in the natural habitat of South American camelids. In this study embryos from llamas were transferred to alpaca recipients. In a parallel study alpaca embryos were transferred to llama recipients. All animals used were free of uterine and ovarian abnormalities detectable by rectal palpation and /or ultrasound examination. Embryos were harvested twice after single ovulation in 10 mated female llamas and non-surgically transferred to synchronized alpaca recipients.

Syfte: Syftet var att undersöka vad kommunikationsbrister kan bero på och hur en organisation kan gå tillväga för att lösa problem som uppstår på grund av dem. Med detta som grund har studien utformat rekommendationer för hur förvärvsorganisationer kan arbeta med den interna kommunikationen och på så sätt överkomma och förebygga brister i kommunikationen.Metod: En fallstudie utifrån en deduktiv forskningsprocess användes genom att ställa upp påståenden utifrån teorin som prövades på empirin. Datainsamlingen skedde genom kvalitativa intervjuer och en kvantitativ enkät.Slutsats: Brister som uppstår i kommunikationen har en verkan på hela organisationens finansiella och prestationsmässiga resultat. Genom att lägga beslag på kommunikationen kan en förvärvsorganisation bli mer framgångsrik..

This thesis will describe the redesign of the manure fork SverigeGrepen. The productis available for purchase in Scandinavia and and parts of the rest of Europe.The product is available in stores but the companys goal is to start distribute it overthe internet. A problem today with a purchase over the internet is that the costumerhas to pay a high shipping-fee due to the products unique form. The long handlecontributes to the high shipping-fee which makes it hard to attract costumers topurchase the product online. Deficiencies have been found at the manure forks basketand needs to be examined.

Background: One of the healthcare tasks is to inform and support patients. Information and support is very important for the management of the disease in patients with psoriasis. Healthcare often focuses on the medical aspects and can easily forget about the individual behind the disease.Aim: To explore what kind of information and support patients with psoriasis receive and need to manage their skin disease.Method: Quantitative study with descriptive design and qualitative elements by analysis of the questionnaire with open questions. The study included 22 participants.Findings: The majority of participants responded that they had received information about various therapies, medications and generally about psoriasis. The information participants most often responded they needed, was essentially continuous information and updates on treatments and knowledge about psoriasis according to medical science.

In our modern society, time is important. Technology is used in countless ways to faster get us from one point to another. The purpose of this report is to inquire whether there is a way to implement an option for personnel at Swedish hospitals to claim priority on an elevator call, and to do this in an efficient way. An ordinary elevator system has been simulated with an implementation of textit{Nearest Car algorithm}, an algorithm which calculates the most suitable elevator car to serve a specific call considering the distance between the call floor and the car and the direction. Along with this algorithm, different ways to handle priority calls has been implemented to see how they affect the mean transport time for both passengers with priority and regular passengers in the elevator.